Aw: [PATCH net-next v3 0/6] net-next: dsa: mt7530: add support for MT7531

Frank Wunderlich frank-w at public-files.de
Sat Sep 5 04:45:54 EDT 2020


tested full series on Bananapi-r64 (mt7531) running iperf3-server

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.09 GBytes   939 Mbits/sec    0             sender
[  5]   0.00-10.01  sec  1.09 GBytes   935 Mbits/sec                  receiver

reverse mode (-R)
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec  1.10 GBytes   941 Mbits/sec    0             sender
[  5]   0.00-10.00  sec  1.09 GBytes   939 Mbits/sec                  receiver

similar to bananapi-r2 (mt7530)

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.09 GBytes   938 Mbits/sec    0             sender
[  5]   0.00-10.01  sec  1.09 GBytes   936 Mbits/sec                  receiver

reverse-mode:

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec  1.05 GBytes   905 Mbits/sec  14533             sender <<<<<<<<<<<
[  5]   0.00-10.00  sec  1.05 GBytes   905 Mbits/sec                  receiver

on last test i see iperf3 has ~30%cpu load and also ksoftirqd (using debian buster), so i tried opening server on my Laptop and running iperf -c on BPI-R2 with similar result

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.03 GBytes   886 Mbits/sec  13990             sender
[  5]   0.00-10.00  sec  1.03 GBytes   885 Mbits/sec                  receiver

in dmesg of both devices only DSA-Messages (nonfatal error -95 setting MTU on port) because of missing port_change_mtu callback. here i got a patch, but had not yet time to setup environment for testing jumbo-frames too. But this just as side-note

regards Frank




More information about the Linux-mediatek mailing list