[PATCH v5 1/1] arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile
Seiya Wang
seiya.wang at mediatek.com
Fri Oct 30 05:32:54 EDT 2020
On Fri, 2020-10-30 at 10:04 +0100, Matthias Brugger wrote:
> On 29/10/2020 16:50, Matthias Brugger wrote:
> >
> >
> > On 27/10/2020 11:26, Seiya Wang wrote:
> >> Add basic chip support for Mediatek MT8192
> >>
> >> Signed-off-by: Seiya Wang <seiya.wang at mediatek.com>
> >
> > Pushed to v5.10-next/dts64
> >
> > Thanks!
> >
> >> ---
> >> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> >> arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 29 ++
> >> arch/arm64/boot/dts/mediatek/mt8192.dtsi | 513 ++++++++++++++++++++++++++++
> >> 3 files changed, 543 insertions(+)
> >> create mode 100644 arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> >> create mode 100644 arch/arm64/boot/dts/mediatek/mt8192.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> >> b/arch/arm64/boot/dts/mediatek/Makefile
> >> index 3ee682c266cc..b431ee2d6cac 100644
> >> --- a/arch/arm64/boot/dts/mediatek/Makefile
> >> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> >> @@ -12,4 +12,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
> >> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> >> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
> >> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> >> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> >> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> >> b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> >> new file mode 100644
> >> index 000000000000..0205837fa698
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
> >> @@ -0,0 +1,29 @@
> >> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >> +/*
> >> + * Copyright (C) 2020 MediaTek Inc.
> >> + * Author: Seiya Wang <seiya.wang at mediatek.com>
> >> + */
> >> +/dts-v1/;
> >> +#include "mt8192.dtsi"
> >> +
> >> +/ {
> >> + model = "MediaTek MT8192 evaluation board";
> >> + compatible = "mediatek,mt8192-evb", "mediatek,mt8192";
> >> +
> >> + aliases {
> >> + serial0 = &uart0;
> >> + };
> >> +
> >> + chosen {
> >> + stdout-path = "serial0:921600n8";
> >> + };
> >> +
> >> + memory at 40000000 {
> >> + device_type = "memory";
> >> + reg = <0 0x40000000 0 0x80000000>;
> >> + };
> >> +};
> >> +
> >> +&uart0 {
> >> + status = "okay";
> >> +};
> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> >> b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> >> new file mode 100644
> >> index 000000000000..648f0f269b8b
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> >> @@ -0,0 +1,513 @@
> >> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >> +/*
> >> + * Copyright (C) 2020 MediaTek Inc.
> >> + * Author: Seiya Wang <seiya.wang at mediatek.com>
> >> + */
> >> +
> >> +/dts-v1/;
> >> +#include <dt-bindings/clock/mt8192-clk.h>
>
> AFAIK the clock driver is not upstream.
> Did you tried to compile this at least?
>
> I dropped it for now. If you want to get that in without the clock driver bein
> accepted first, you will need to fix this patch. And please make sure it
> compiles against v5.10-rc1
>
> Regards,
> Matthias
>
I have fixed this issue and resend v6.
Please kindly check it again and sorry for my careless mistake.
Seiya
> >> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >> +#include <dt-bindings/interrupt-controller/irq.h>
> >> +#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
> >> +
> >> +/ {
> >> + compatible = "mediatek,mt8192";
> >> + interrupt-parent = <&gic>;
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> +
> >> + clk26m: oscillator0 {
> >> + compatible = "fixed-clock";
> >> + #clock-cells = <0>;
> >> + clock-frequency = <26000000>;
> >> + clock-output-names = "clk26m";
> >> + };
> >> +
> >> + clk32k: oscillator1 {
> >> + compatible = "fixed-clock";
> >> + #clock-cells = <0>;
> >> + clock-frequency = <32768>;
> >> + clock-output-names = "clk32k";
> >> + };
> >> +
> >> + cpus {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + cpu0: cpu at 0 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a55";
> >> + reg = <0x000>;
> >> + enable-method = "psci";
> >> + clock-frequency = <1701000000>;
> >> + next-level-cache = <&l2_0>;
> >> + capacity-dmips-mhz = <530>;
> >> + };
> >> +
> >> + cpu1: cpu at 100 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a55";
> >> + reg = <0x100>;
> >> + enable-method = "psci";
> >> + clock-frequency = <1701000000>;
> >> + next-level-cache = <&l2_0>;
> >> + capacity-dmips-mhz = <530>;
> >> + };
> >> +
> >> + cpu2: cpu at 200 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a55";
> >> + reg = <0x200>;
> >> + enable-method = "psci";
> >> + clock-frequency = <1701000000>;
> >> + next-level-cache = <&l2_0>;
> >> + capacity-dmips-mhz = <530>;
> >> + };
> >> +
> >> + cpu3: cpu at 300 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a55";
> >> + reg = <0x300>;
> >> + enable-method = "psci";
> >> + clock-frequency = <1701000000>;
> >> + next-level-cache = <&l2_0>;
> >> + capacity-dmips-mhz = <530>;
> >> + };
> >> +
> >> + cpu4: cpu at 400 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a76";
> >> + reg = <0x400>;
> >> + enable-method = "psci";
> >> + clock-frequency = <2171000000>;
> >> + next-level-cache = <&l2_1>;
> >> + capacity-dmips-mhz = <1024>;
> >> + };
> >> +
> >> + cpu5: cpu at 500 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a76";
> >> + reg = <0x500>;
> >> + enable-method = "psci";
> >> + clock-frequency = <2171000000>;
> >> + next-level-cache = <&l2_1>;
> >> + capacity-dmips-mhz = <1024>;
> >> + };
> >> +
> >> + cpu6: cpu at 600 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a76";
> >> + reg = <0x600>;
> >> + enable-method = "psci";
> >> + clock-frequency = <2171000000>;
> >> + next-level-cache = <&l2_1>;
> >> + capacity-dmips-mhz = <1024>;
> >> + };
> >> +
> >> + cpu7: cpu at 700 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a76";
> >> + reg = <0x700>;
> >> + enable-method = "psci";
> >> + clock-frequency = <2171000000>;
> >> + next-level-cache = <&l2_1>;
> >> + capacity-dmips-mhz = <1024>;
> >> + };
> >> +
> >> + cpu-map {
> >> + cluster0 {
> >> + core0 {
> >> + cpu = <&cpu0>;
> >> + };
> >> + core1 {
> >> + cpu = <&cpu1>;
> >> + };
> >> + core2 {
> >> + cpu = <&cpu2>;
> >> + };
> >> + core3 {
> >> + cpu = <&cpu3>;
> >> + };
> >> + };
> >> +
> >> + cluster1 {
> >> + core0 {
> >> + cpu = <&cpu4>;
> >> + };
> >> + core1 {
> >> + cpu = <&cpu5>;
> >> + };
> >> + core2 {
> >> + cpu = <&cpu6>;
> >> + };
> >> + core3 {
> >> + cpu = <&cpu7>;
> >> + };
> >> + };
> >> + };
> >> +
> >> + l2_0: l2-cache0 {
> >> + compatible = "cache";
> >> + next-level-cache = <&l3_0>;
> >> + };
> >> +
> >> + l2_1: l2-cache1 {
> >> + compatible = "cache";
> >> + next-level-cache = <&l3_0>;
> >> + };
> >> +
> >> + l3_0: l3-cache {
> >> + compatible = "cache";
> >> + };
> >> + };
> >> +
> >> + pmu-a55 {
> >> + compatible = "arm,cortex-a55-pmu";
> >> + interrupt-parent = <&gic>;
> >> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> >> + };
> >> +
> >> + pmu-a76 {
> >> + compatible = "arm,cortex-a76-pmu";
> >> + interrupt-parent = <&gic>;
> >> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> >> + };
> >> +
> >> + psci {
> >> + compatible = "arm,psci-1.0";
> >> + method = "smc";
> >> + };
> >> +
> >> + timer: timer {
> >> + compatible = "arm,armv8-timer";
> >> + interrupt-parent = <&gic>;
> >> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> >> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
> >> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> >> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clock-frequency = <13000000>;
> >> + };
> >> +
> >> + soc {
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> + compatible = "simple-bus";
> >> + ranges;
> >> +
> >> + gic: interrupt-controller at c000000 {
> >> + compatible = "arm,gic-v3";
> >> + #interrupt-cells = <4>;
> >> + #redistributor-regions = <1>;
> >> + interrupt-parent = <&gic>;
> >> + interrupt-controller;
> >> + reg = <0 0x0c000000 0 0x40000>,
> >> + <0 0x0c040000 0 0x200000>;
> >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> >> +
> >> + ppi-partitions {
> >> + ppi_cluster0: interrupt-partition-0 {
> >> + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
> >> + };
> >> + ppi_cluster1: interrupt-partition-1 {
> >> + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
> >> + };
> >> + };
> >> + };
> >> +
> >> + pio: pinctrl at 10005000 {
> >> + compatible = "mediatek,mt8192-pinctrl";
> >> + reg = <0 0x10005000 0 0x1000>,
> >> + <0 0x11c20000 0 0x1000>,
> >> + <0 0x11d10000 0 0x1000>,
> >> + <0 0x11d30000 0 0x1000>,
> >> + <0 0x11d40000 0 0x1000>,
> >> + <0 0x11e20000 0 0x1000>,
> >> + <0 0x11e70000 0 0x1000>,
> >> + <0 0x11ea0000 0 0x1000>,
> >> + <0 0x11f20000 0 0x1000>,
> >> + <0 0x11f30000 0 0x1000>,
> >> + <0 0x1000b000 0 0x1000>;
> >> + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
> >> + "iocfg_bl", "iocfg_br", "iocfg_lm",
> >> + "iocfg_lb", "iocfg_rt", "iocfg_lt",
> >> + "iocfg_tl", "eint";
> >> + gpio-controller;
> >> + #gpio-cells = <2>;
> >> + gpio-ranges = <&pio 0 0 220>;
> >> + interrupt-controller;
> >> + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + #interrupt-cells = <2>;
> >> + };
> >> +
> >> + systimer: timer at 10017000 {
> >> + compatible = "mediatek,mt8192-timer",
> >> + "mediatek,mt6765-timer";
> >> + reg = <0 0x10017000 0 0x1000>;
> >> + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
> >> + clock-names = "clk13m";
> >> + };
> >> +
> >> + uart0: serial at 11002000 {
> >> + compatible = "mediatek,mt8192-uart",
> >> + "mediatek,mt6577-uart";
> >> + reg = <0 0x11002000 0 0x1000>;
> >> + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "baud", "bus";
> >> + status = "disabled";
> >> + };
> >> +
> >> + uart1: serial at 11003000 {
> >> + compatible = "mediatek,mt8192-uart",
> >> + "mediatek,mt6577-uart";
> >> + reg = <0 0x11003000 0 0x1000>;
> >> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "baud", "bus";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi0: spi at 1100a000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x1100a000 0 0x1000>;
> >> + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI0>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi1: spi at 11010000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x11010000 0 0x1000>;
> >> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI1>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi2: spi at 11012000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x11012000 0 0x1000>;
> >> + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI2>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi3: spi at 11013000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x11013000 0 0x1000>;
> >> + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI3>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi4: spi at 11018000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x11018000 0 0x1000>;
> >> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI4>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi5: spi at 11019000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x11019000 0 0x1000>;
> >> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI5>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi6: spi at 1101d000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x1101d000 0 0x1000>;
> >> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI6>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + spi7: spi at 1101e000 {
> >> + compatible = "mediatek,mt8192-spi",
> >> + "mediatek,mt6765-spi";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0 0x1101e000 0 0x1000>;
> >> + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
> >> + <&topckgen CLK_TOP_SPI_SEL>,
> >> + <&infracfg CLK_INFRA_SPI7>;
> >> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c3: i2c3 at 11cb0000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11cb0000 0 0x1000>,
> >> + <0 0x10217300 0 0x80>;
> >> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c7: i2c7 at 11d00000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11d00000 0 0x1000>,
> >> + <0 0x10217600 0 0x180>;
> >> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c8: i2c8 at 11d01000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11d01000 0 0x1000>,
> >> + <0 0x10217780 0 0x180>;
> >> + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c9: i2c9 at 11d02000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11d02000 0 0x1000>,
> >> + <0 0x10217900 0 0x180>;
> >> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c1: i2c1 at 11d20000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11d20000 0 0x1000>,
> >> + <0 0x10217100 0 0x80>;
> >> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c2: i2c2 at 11d21000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11d21000 0 0x1000>,
> >> + <0 0x10217180 0 0x180>;
> >> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c4: i2c4 at 11d22000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11d22000 0 0x1000>,
> >> + <0 0x10217380 0 0x180>;
> >> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c5: i2c5 at 11e00000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11e00000 0 0x1000>,
> >> + <0 0x10217500 0 0x80>;
> >> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c0: i2c0 at 11f00000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11f00000 0 0x1000>,
> >> + <0 0x10217080 0 0x80>;
> >> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + i2c6: i2c6 at 11f01000 {
> >> + compatible = "mediatek,mt8192-i2c";
> >> + reg = <0 0x11f01000 0 0x1000>,
> >> + <0 0x10217580 0 0x80>;
> >> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
> >> + clocks = <&clk26m>, <&clk26m>;
> >> + clock-names = "main", "dma";
> >> + clock-div = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + status = "disabled";
> >> + };
> >> + };
> >> +};
> >>
>
More information about the Linux-mediatek
mailing list