[PATCH v1 5/6] cpufreq: mediatek-hw: Add SVS CPU initialization

[Hector Yuan]

From: "Hector.Yuan" <hector.yuan at mediatek.com>

Use pm_qos to block cpu-idle state for SVS initializing.
CPUs must be in power on state when doing SVS.
Add polling ack while coufreq hw is ready.(SVS init done)

Signed-off-by: Hector.Yuan <hector.yuan at mediatek.com>
---
 drivers/cpufreq/mediatek-cpufreq-hw.c |   32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
index 241d93f..15fba20 100644
--- a/drivers/cpufreq/mediatek-cpufreq-hw.c
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -7,20 +7,27 @@
 #include <linux/cpufreq.h>
 #include <linux/energy_model.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/pm_qos.h>
 #include <linux/slab.h>
 
 #define LUT_MAX_ENTRIES			32U
 #define LUT_FREQ			GENMASK(11, 0)
 #define LUT_ROW_SIZE			0x4
+#define CPUFREQ_HW_STATUS		BIT(0)
+#define SVS_HW_STATUS			BIT(1)
+#define POLL_USEC			1000
+#define TIMEOUT_USEC			300000
 
 enum {
 	REG_FREQ_LUT_TABLE,
 	REG_FREQ_ENABLE,
 	REG_FREQ_PERF_STATE,
+	REG_FREQ_HW_STATE,
 	REG_EM_POWER_TBL,
 
 	REG_ARRAY_SIZE,
@@ -37,6 +44,7 @@ struct cpufreq_mtk {
 	[REG_FREQ_LUT_TABLE]	= 0x0,
 	[REG_FREQ_ENABLE]	= 0x84,
 	[REG_FREQ_PERF_STATE]	= 0x88,
+	[REG_FREQ_HW_STATE]	= 0x8c,
 	[REG_EM_POWER_TBL]	= 0x3D0,
 };
 
@@ -89,6 +97,12 @@ static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	struct cpufreq_mtk *c;
 	struct device *cpu_dev;
 	struct em_data_callback em_cb = EM_DATA_CB(mtk_cpufreq_get_cpu_power);
+	struct pm_qos_request *qos_request;
+	int sig, pwr_hw = CPUFREQ_HW_STATUS | SVS_HW_STATUS;
+
+	qos_request = kzalloc(sizeof(*qos_request), GFP_KERNEL);
+	if (!qos_request)
+		return -ENOMEM;
 
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
@@ -107,11 +121,29 @@ static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	policy->freq_table = c->table;
 	policy->driver_data = c;
 
+	/* Let CPUs leave idle-off state for SVS CPU initializing */
+	cpu_latency_qos_add_request(qos_request, 0);
+
 	/* HW should be in enabled state to proceed now */
 	writel_relaxed(0x1, c->reg_bases[REG_FREQ_ENABLE]);
 
+	if (readl_poll_timeout(c->reg_bases[REG_FREQ_HW_STATE], sig,
+			       (sig & pwr_hw) == pwr_hw, POLL_USEC,
+			       TIMEOUT_USEC)) {
+		if (!(sig & CPUFREQ_HW_STATUS)) {
+			pr_info("cpufreq hardware of CPU%d is not enabled\n",
+				policy->cpu);
+			return -ENODEV;
+		}
+
+		pr_info("SVS of CPU%d is not enabled\n", policy->cpu);
+	}
+
 	em_dev_register_perf_domain(cpu_dev, c->nr_opp, &em_cb, policy->cpus);
 
+	cpu_latency_qos_remove_request(qos_request);
+	kfree(qos_request);
+
 	return 0;
 }
 
-- 
1.7.9.5