[PATCH v3 03/10] mt76: testmode: add tx_rate_stbc parameter
Shayne Chen
shayne.chen at mediatek.com
Mon Oct 12 08:53:56 EDT 2020
Add the parameter to control STBC function in testmode.
Reviewed-by: Ryder Lee <ryder.lee at mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
drivers/net/wireless/mediatek/mt76/testmode.c | 6 ++++++
drivers/net/wireless/mediatek/mt76/testmode.h | 2 ++
3 files changed, 9 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 009d20a..9ff249e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -527,6 +527,7 @@ struct mt76_testmode_data {
u8 tx_rate_nss;
u8 tx_rate_sgi;
u8 tx_rate_ldpc;
+ u8 tx_rate_stbc;
u8 tx_antenna_mask;
diff --git a/drivers/net/wireless/mediatek/mt76/testmode.c b/drivers/net/wireless/mediatek/mt76/testmode.c
index 883f59c..6b59e08 100644
--- a/drivers/net/wireless/mediatek/mt76/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/testmode.c
@@ -11,6 +11,7 @@ static const struct nla_policy mt76_tm_policy[NUM_MT76_TM_ATTRS] = {
[MT76_TM_ATTR_TX_RATE_IDX] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_RATE_SGI] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_RATE_LDPC] = { .type = NLA_U8 },
+ [MT76_TM_ATTR_TX_RATE_STBC] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_ANTENNA] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_POWER_CONTROL] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_POWER] = { .type = NLA_NESTED },
@@ -131,6 +132,9 @@ mt76_testmode_tx_init(struct mt76_dev *dev)
if (td->tx_rate_ldpc)
info->flags |= IEEE80211_TX_CTL_LDPC;
+ if (td->tx_rate_stbc)
+ info->flags |= IEEE80211_TX_CTL_STBC;
+
if (td->tx_rate_mode >= MT76_TM_TX_MODE_HT) {
switch (dev->phy.chandef.width) {
case NL80211_CHAN_WIDTH_40:
@@ -336,6 +340,7 @@ int mt76_testmode_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1, hweight8(phy->antenna_mask)) ||
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_RATE_SGI], &td->tx_rate_sgi, 0, 1) ||
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_RATE_LDPC], &td->tx_rate_ldpc, 0, 1) ||
+ mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_RATE_STBC], &td->tx_rate_stbc, 0, 1) ||
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_ANTENNA], &td->tx_antenna_mask, 1,
phy->antenna_mask) ||
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_POWER_CONTROL],
@@ -472,6 +477,7 @@ int mt76_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *msg,
nla_put_u8(msg, MT76_TM_ATTR_TX_RATE_IDX, td->tx_rate_idx) ||
nla_put_u8(msg, MT76_TM_ATTR_TX_RATE_SGI, td->tx_rate_sgi) ||
nla_put_u8(msg, MT76_TM_ATTR_TX_RATE_LDPC, td->tx_rate_ldpc) ||
+ nla_put_u8(msg, MT76_TM_ATTR_TX_RATE_STBC, td->tx_rate_stbc) ||
(mt76_testmode_param_present(td, MT76_TM_ATTR_TX_ANTENNA) &&
nla_put_u8(msg, MT76_TM_ATTR_TX_ANTENNA, td->tx_antenna_mask)) ||
(mt76_testmode_param_present(td, MT76_TM_ATTR_TX_POWER_CONTROL) &&
diff --git a/drivers/net/wireless/mediatek/mt76/testmode.h b/drivers/net/wireless/mediatek/mt76/testmode.h
index 4d22627..00c1659 100644
--- a/drivers/net/wireless/mediatek/mt76/testmode.h
+++ b/drivers/net/wireless/mediatek/mt76/testmode.h
@@ -25,6 +25,7 @@
* @MT76_TM_ATTR_TX_RATE_IDX: packet tx rate/MCS index (u8)
* @MT76_TM_ATTR_TX_RATE_SGI: packet tx use short guard interval (u8)
* @MT76_TM_ATTR_TX_RATE_LDPC: packet tx enable LDPC (u8)
+ * @MT76_TM_ATTR_TX_RATE_STBC: packet tx enable STBC (u8)
*
* @MT76_TM_ATTR_TX_ANTENNA: tx antenna mask (u8)
* @MT76_TM_ATTR_TX_POWER_CONTROL: enable tx power control (u8)
@@ -50,6 +51,7 @@ enum mt76_testmode_attr {
MT76_TM_ATTR_TX_RATE_IDX,
MT76_TM_ATTR_TX_RATE_SGI,
MT76_TM_ATTR_TX_RATE_LDPC,
+ MT76_TM_ATTR_TX_RATE_STBC,
MT76_TM_ATTR_TX_ANTENNA,
MT76_TM_ATTR_TX_POWER_CONTROL,
--
2.17.1
More information about the Linux-mediatek
mailing list