[PATCH 00/12] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller

[Enric Balletbo i Serra]

Hi,

On 9/10/20 14:50, Matthias Brugger wrote:
> 
> 
> On 06/10/2020 08:53, Weiyi Lu wrote:
>> On Fri, 2020-09-25 at 16:04 +0200, Matthias Brugger wrote:
>>>
>>> On 25/09/2020 12:06, Weiyi Lu wrote:
>>>> On Thu, 2020-09-10 at 19:28 +0200, Enric Balletbo i Serra wrote:
>>>>> Dear all,
>>>>>
>>>>> This is a new driver with the aim to deprecate the mtk-scpsys driver.
>>>>> The problem with that driver is that, in order to support more Mediatek
>>>>> SoCs you need to add some logic to handle properly the power-up
>>>>> sequence of newer Mediatek SoCs, doesn't handle parent-child power
>>>>> domains and need to hardcode all the clocks in the driver itself. The
>>>>> result is that the driver is getting bigger and bigger every time a
>>>>> new SoC needs to be supported.
>>>>>
>>>>
>>>> Hi Enric and Matthias,
>>>>
>>>> First of all, thank you for the patch. But I'm worried the problem you
>>>> mentioned won't be solved even if we work on this new driver in the
>>>> future. My work on the MT8183 scpsys(now v17) is to implement the new
>>>> hardware logic. Here, I also see related patches, which means that these
>>>> new logics are necessary. Why can't we work on the original driver?
>>>
>>> Well the decision was to change the driver in a not compatible way to make
>>> device tree entries better. If we work on the old driver, we would need to find
>>> some creative ways to handle old bindings vs new bindings.
>>>
>>> So I thought it would be better doing a fresh start implementing mt1873 support
>>> for reference and add mt8183 as new SoC. From what I have seen mt8192 and others
>>> fit the driver structure too.
>>>
>>>> Meanwhile, I thought maybe we should separate the driver into general
>>>> control and platform data for each SoC, otherwise it'll keep getting
>>>> bigger and bigger if it need to be support new SoC.
>>>>
>>>
>>> We could in a later series split the SoC depended data structures and put them
>>> in drivers/soc/mediatek/pm-domains-mt8183.h or something like this. Is that what
>>> you mean?
>>>
>>
>> Yes, that is what I want. And I guess it could avoid the collisions in
>> the different defines to the control registers and power status bits you
>> mentioned. Hope this will happen in this series.
>>
> 
> Sounds good to me. Enric could you move the soc specific data to separate
> include files?
> 

Sure, I'll do this in v4.

Thanks,
 Enric

> Regards,
> Matthias
>