[PATCH 4/4] soc: mediatek: mmsys: Use an array for setting the routing registers

[Enric Balletbo i Serra]

Hi Chun-Kuang,

On 8/10/20 2:01, Chun-Kuang Hu wrote:
> Hi, Enric:
> 
> Enric Balletbo i Serra <enric.balletbo at collabora.com> 於 2020年10月7日 週三 上午3:33寫道：
>>
>> From: CK Hu <ck.hu at mediatek.com>
>>
>> Actually, setting the registers for routing, use multiple 'if-else' for different
>> routes, but this code would be more and more complicated while we
>> support more and more SoCs. Change that and use a table per SoC so the
>> code will be more portable and clear.
>>
>> Signed-off-by: CK Hu <ck.hu at mediatek.com>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
>> ---
>>
>>  drivers/soc/mediatek/mtk-mmsys.c | 393 +++++++++++++++++--------------
>>  1 file changed, 210 insertions(+), 183 deletions(-)
>>
> 
> [snip]
> 
>>
>>  static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
>> @@ -93,10 +115,6 @@ static const struct mtk_mmsys_driver_data mt6797_mmsys_driver_data = {
>>         .clk_driver = "clk-mt6797-mm",
>>  };
>>
>> -static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
>> -       .clk_driver = "clk-mt8173-mm",
>> -};
>> -
>>  static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
>>         .clk_driver = "clk-mt8183-mm",
>>  };
>> @@ -106,180 +124,192 @@ struct mtk_mmsys {
>>         const struct mtk_mmsys_driver_data *data;
>>  };
>>
> 
> [snip]
> 
>> +static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
>> +       .clk_driver = "clk-mt8173-mm",
>> +       .routes = mt8173_mmsys_routing_table,
>> +       .num_routes = ARRAY_SIZE(mt8173_mmsys_routing_table),
>> +};
>>
> 
> I remove my Reviewed-by tag. You does not set routes for mt2701 and
> mt2712, but these two SoC need that. Maybe now they use the same table
> as mt8173.
> 

I did that on purpose as explained in the cover letter, and asked for someone
with the hardware to provide me a working routing table. But, if you think the
same routing should work on those devices I'm fine to use the same for all the
current devices. I don't have that hardware, so anyway, will need to test.

Thanks,
 Enric

> Regards,
> Chun-Kuang.
>