[PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller

Weiyi Lu weiyi.lu at mediatek.com
Thu Nov 26 21:24:51 EST 2020


On Fri, 2020-10-30 at 12:36 +0100, Enric Balletbo i Serra wrote:
> The System Control Processor System (SCPSYS) has several power management
> related tasks in the system. Add the bindings to define the power
> domains for the SCPSYS power controller.
> 
> Co-developed-by: Matthias Brugger <mbrugger at suse.com>
> Signed-off-by: Matthias Brugger <mbrugger at suse.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---
> 
> Changes in v4:
> - Fix indentation warnings reported by yamllint
> 
> Changes in v3:
> - Use hex for unit-addresses.
> - Define child nodes for nested power domains even are duplicated, but
>   more clear than adding a regex scaped to be a valid URI.
> 
> Changes in v2:
> - Use generic node names (power-domain).
> - Define valid values for common properties like #power-domain-cells.
> 
>  .../power/mediatek,power-controller.yaml      | 289 ++++++++++++++++++
>  1 file changed, 289 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> new file mode 100644
> index 000000000000..73b8988bd063
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> @@ -0,0 +1,289 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Power Domains Controller
> +
> +maintainers:
> +  - Weiyi Lu <weiyi.lu at mediatek.com>
> +  - Matthias Brugger <mbrugger at suse.com>
> +
> +description: |
> +  Mediatek processors include support for multiple power domains which can be
> +  powered up/down by software based on different application scenes to save power.
> +
> +  IP cores belonging to a power domain should contain a 'power-domains'
> +  property that is a phandle for SCPSYS node representing the domain.
> +
> +properties:
> +  $nodename:
> +    const: power-controller
> +
> +  compatible:
> +    enum:
> +      - mediatek,mt8173-power-controller
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  "^power-domain@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      Represents the power domains within the power controller node as documented
> +      in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> +    properties:
> +
> +      '#power-domain-cells':
> +        description:
> +          Must be 0 for nodes representing a single PM domain and 1 for nodes
> +          providing multiple PM domains.
> +
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +      reg:
> +        description: |
> +          Power domain index. Valid values are defined in:
> +              "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
> +        maxItems: 1
> +
> +      clocks:
> +        description: |
> +          A number of phandles to clocks that need to be enabled during domain
> +          power-up sequencing.
> +
> +      clock-names:
> +        description: |
> +          List of names of clocks, in order to match the power-up sequencing
> +          for each power domain we need to group the clocks by name. BASIC
> +          clocks need to be enabled before enabling the corresponding power
> +          domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> +          SUSBYS clocks need to be enabled before releasing the bus protection,
> +          and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> +          In order to follow properly the power-up sequencing, the clocks must
> +          be specified by order, adding first the BASIC clocks followed by the
> +          SUSBSYS clocks.
> +
> +      mediatek,infracfg:
> +        $ref: /schemas/types.yaml#definitions/phandle
> +        description: phandle to the device containing the INFRACFG register range.
> +
> +      mediatek,smi:
> +        $ref: /schemas/types.yaml#definitions/phandle
> +        description: phandle to the device containing the SMI register range.
> +
> +    patternProperties:
> +      "^power-domain@[0-9a-f]+$":
> +        type: object
> +        description: |
> +          Represents a power domain child within a power domain parent node.
> +
> +        properties:
> +
> +          '#power-domain-cells':
> +            description:
> +              Must be 0 for nodes representing a single PM domain and 1 for nodes
> +              providing multiple PM domains.
> +
> +          '#address-cells':
> +            const: 1
> +
> +          '#size-cells':
> +            const: 0
> +
> +          reg:
> +            maxItems: 1
> +
> +          clocks:
> +            description: |
> +              A number of phandles to clocks that need to be enabled during domain
> +              power-up sequencing.
> +
> +          clock-names:
> +            description: |
> +              List of names of clocks, in order to match the power-up sequencing
> +              for each power domain we need to group the clocks by name. BASIC
> +              clocks need to be enabled before enabling the corresponding power
> +              domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> +              SUSBYS clocks need to be enabled before releasing the bus protection,
> +              and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> +              In order to follow properly the power-up sequencing, the clocks must
> +              be specified by order, adding first the BASIC clocks followed by the
> +              SUSBSYS clocks.
> +
> +          mediatek,infracfg:
> +            $ref: /schemas/types.yaml#definitions/phandle
> +            description: phandle to the device containing the INFRACFG register range.
> +
> +          mediatek,smi:
> +            $ref: /schemas/types.yaml#definitions/phandle
> +            description: phandle to the device containing the SMI register range.
> +
> +        patternProperties:
> +          "^power-domain@[0-9a-f]+$":
> +            type: object
> +            description: |
> +              Represents a power domain child within a power domain parent node.
> +
> +            properties:
> +
> +              '#power-domain-cells':
> +                description:
> +                  Must be 0 for nodes representing a single PM domain and 1 for nodes
> +                  providing multiple PM domains.
> +
> +              '#address-cells':
> +                const: 1
> +
> +              '#size-cells':
> +                const: 0
> +
> +              reg:
> +                maxItems: 1
> +
> +              clocks:
> +                description: |
> +                  A number of phandles to clocks that need to be enabled during domain
> +                  power-up sequencing.
> +
> +              clock-names:
> +                description: |
> +                  List of names of clocks, in order to match the power-up sequencing
> +                  for each power domain we need to group the clocks by name. BASIC
> +                  clocks need to be enabled before enabling the corresponding power
> +                  domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> +                  SUSBYS clocks need to be enabled before releasing the bus protection,
> +                  and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> +                  In order to follow properly the power-up sequencing, the clocks must
> +                  be specified by order, adding first the BASIC clocks followed by the
> +                  SUSBSYS clocks.
> +
> +              mediatek,infracfg:
> +                $ref: /schemas/types.yaml#definitions/phandle
> +                description: phandle to the device containing the INFRACFG register range.
> +
> +              mediatek,smi:
> +                $ref: /schemas/types.yaml#definitions/phandle
> +                description: phandle to the device containing the SMI register range.
> +
> +            required:
> +              - reg
> +
> +            additionalProperties: false
> +
> +        required:
> +          - reg
> +
> +        additionalProperties: false
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8173-clk.h>
> +    #include <dt-bindings/power/mt8173-power.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        scpsys: syscon at 10006000 {
> +            compatible = "syscon", "simple-mfd";
> +            reg = <0 0x10006000 0 0x1000>;
> +
> +            spm: power-controller {
> +                compatible = "mediatek,mt8173-power-controller";
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                #power-domain-cells = <1>;

Hi Enric and Matthias,

I'd like to know whether we could only keep this power-domain-cells
property here and make others optional, which can more directly point
out who is the real power domain provider?

> +
> +                /* power domains of the SoC */
> +                power-domain at MT8173_POWER_DOMAIN_VDEC {
> +                    reg = <MT8173_POWER_DOMAIN_VDEC>;
> +                    clocks = <&topckgen CLK_TOP_MM_SEL>;
> +                    clock-names = "mm";
> +                    #power-domain-cells = <0>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_VENC {
> +                    reg = <MT8173_POWER_DOMAIN_VENC>;
> +                    clocks = <&topckgen CLK_TOP_MM_SEL>,
> +                             <&topckgen CLK_TOP_VENC_SEL>;
> +                    clock-names = "mm", "venc";
> +                    #power-domain-cells = <0>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_ISP {
> +                    reg = <MT8173_POWER_DOMAIN_ISP>;
> +                    clocks = <&topckgen CLK_TOP_MM_SEL>;
> +                    clock-names = "mm";
> +                    #power-domain-cells = <0>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_MM {
> +                    reg = <MT8173_POWER_DOMAIN_MM>;
> +                    clocks = <&topckgen CLK_TOP_MM_SEL>;
> +                    clock-names = "mm";
> +                    #power-domain-cells = <0>;
> +                    mediatek,infracfg = <&infracfg>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_VENC_LT {
> +                    reg = <MT8173_POWER_DOMAIN_VENC_LT>;
> +                    clocks = <&topckgen CLK_TOP_MM_SEL>,
> +                             <&topckgen CLK_TOP_VENC_LT_SEL>;
> +                    clock-names = "mm", "venclt";
> +                    #power-domain-cells = <0>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_AUDIO {
> +                    reg = <MT8173_POWER_DOMAIN_AUDIO>;
> +                    #power-domain-cells = <0>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_USB {
> +                    reg = <MT8173_POWER_DOMAIN_USB>;
> +                    #power-domain-cells = <0>;
> +                };
> +                power-domain at MT8173_POWER_DOMAIN_MFG_ASYNC {
> +                    reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
> +                    clocks = <&clk26m>;
> +                    clock-names = "mfg";
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    #power-domain-cells = <1>;
> +
> +                    power-domain at MT8173_POWER_DOMAIN_MFG_2D {
> +                        reg = <MT8173_POWER_DOMAIN_MFG_2D>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                        #power-domain-cells = <1>;
> +
> +                        power-domain at MT8173_POWER_DOMAIN_MFG {
> +                            reg = <MT8173_POWER_DOMAIN_MFG>;
> +                            #power-domain-cells = <0>;
> +                            mediatek,infracfg = <&infracfg>;
> +                        };
> +                    };
> +                };
> +            };
> +        };
> +    };



More information about the Linux-mediatek mailing list