[v5 2/3] arm64: dts: mt8183: Configure CPU cooling

Hsin-Yi Wang hsinyi at chromium.org
Tue Nov 24 03:25:08 EST 2020


On Tue, Oct 13, 2020 at 6:24 PM Michael Kao <michael.kao at mediatek.com> wrote:
>
> From: Matthias Kaehlcke <mka at chromium.org>
>
> Add two passive trip points at 68°C and 80°C for the CPU temperature.
>
> Signed-off-by: Matthias Kaehlcke <mka at chromium.org>
> Signed-off-by: Michael Kao <michael.kao at mediatek.com>

Tested-by: Hsin-Yi Wang <hsinyi at chromium.org>

> ---
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 56 ++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 1cd093cf33f3..0614f18a1ea2 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/reset-controller/mt8183-resets.h>
>  #include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/thermal/thermal.h>
>  #include "mt8183-pinfunc.h"
>
>  / {
> @@ -450,6 +451,61 @@
>                                 polling-delay = <500>;
>                                 thermal-sensors = <&thermal 0>;
>                                 sustainable-power = <5000>;
> +
> +                               trips {
> +                                       threshold: trip-point at 0 {
> +                                               temperature = <68000>;
> +                                               hysteresis = <2000>;
> +                                               type = "passive";
> +                                       };
> +
> +                                       target: trip-point at 1 {
> +                                               temperature = <80000>;
> +                                               hysteresis = <2000>;
> +                                               type = "passive";
> +                                       };
> +
> +                                       cpu_crit: cpu-crit {
> +                                               temperature = <115000>;
> +                                               hysteresis = <2000>;
> +                                               type = "critical";
> +                                       };
> +                               };
> +
> +                               cooling-maps {
> +                                       map0 {
> +                                               trip = <&target>;
> +                                               cooling-device = <&cpu0
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>,
> +                                                                <&cpu1
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>,
> +                                                                <&cpu2
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>,
> +                                                                <&cpu3
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>;
> +                                               contribution = <3072>;
> +                                       };
> +                                       map1 {
> +                                               trip = <&target>;
> +                                               cooling-device = <&cpu4
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>,
> +                                                                <&cpu5
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>,
> +                                                                <&cpu6
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>,
> +                                                                <&cpu7
> +                                                       THERMAL_NO_LIMIT
> +                                                       THERMAL_NO_LIMIT>;
> +                                               contribution = <1024>;
> +                                       };
> +                               };
>                         };
>
>                         /* The tzts1 ~ tzts6 don't need to polling */
> --
> 2.18.0



More information about the Linux-mediatek mailing list