[PATCH v1 6/9] scsi: ufs-hisi: Use device parameter initialization function

Stanley Chu stanley.chu at mediatek.com
Mon Nov 16 01:50:51 EST 2020


Use common device parameter initialization function instead of
initialziing those parameters by vendor driver itself.

Signed-off-by: Stanley Chu <stanley.chu at mediatek.com>
---
 drivers/scsi/ufs/ufs-hisi.c | 13 +------------
 drivers/scsi/ufs/ufs-hisi.h | 13 -------------
 2 files changed, 1 insertion(+), 25 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 074a6a055a4c..0aa58131e791 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -293,18 +293,7 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba,
 
 static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param)
 {
-	hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
-	hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
-	hisi_param->hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX;
-	hisi_param->hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX;
-	hisi_param->pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX;
-	hisi_param->pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX;
-	hisi_param->rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM;
-	hisi_param->tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM;
-	hisi_param->rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS;
-	hisi_param->tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS;
-	hisi_param->hs_rate = UFS_HISI_LIMIT_HS_RATE;
-	hisi_param->desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE;
+	ufshcd_init_pwr_dev_param(hisi_param);
 }
 
 static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h
index 3231d3d81c98..5a90c0f4e90c 100644
--- a/drivers/scsi/ufs/ufs-hisi.h
+++ b/drivers/scsi/ufs/ufs-hisi.h
@@ -76,19 +76,6 @@ enum {
 #define SLOW	1
 #define FAST	2
 
-#define UFS_HISI_LIMIT_NUM_LANES_RX	2
-#define UFS_HISI_LIMIT_NUM_LANES_TX	2
-#define UFS_HISI_LIMIT_HSGEAR_RX	UFS_HS_G3
-#define UFS_HISI_LIMIT_HSGEAR_TX	UFS_HS_G3
-#define UFS_HISI_LIMIT_PWMGEAR_RX	UFS_PWM_G4
-#define UFS_HISI_LIMIT_PWMGEAR_TX	UFS_PWM_G4
-#define UFS_HISI_LIMIT_RX_PWR_PWM	SLOW_MODE
-#define UFS_HISI_LIMIT_TX_PWR_PWM	SLOW_MODE
-#define UFS_HISI_LIMIT_RX_PWR_HS	FAST_MODE
-#define UFS_HISI_LIMIT_TX_PWR_HS	FAST_MODE
-#define UFS_HISI_LIMIT_HS_RATE	PA_HS_MODE_B
-#define UFS_HISI_LIMIT_DESIRED_MODE	FAST
-
 #define UFS_HISI_CAP_RESERVED		BIT(0)
 #define UFS_HISI_CAP_PHY10nm		BIT(1)
 
-- 
2.18.0


More information about the Linux-mediatek mailing list