[PATCH v5 09/10] iommu/mediatek: Modify MMU_CTRL register setting

[Matthias Brugger]

On 29/06/2020 09:13, Chao Hao wrote:
> MT8173 is different from other SoCs for MMU_CTRL register.
> For mt8173, its bit9 is in_order_write_en and doesn't use its
> default 1'b1.> For other SoCs, bit[12] represents victim_tlb_en feature and
> victim_tlb is enable defaultly(bit[12]=1), if we use
> "regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR", victim_tlb will be
> disabled, it will drop iommu performace.
> So we need to deal with the setting of MMU_CTRL separately
> for mt8173 and others.
> 

My proposal to rewrite the commit message:

The MMU_CTRL regiser of MT8173 is different from other SoCs. The in_order_wr_en
is bit[9] which is zero by default.
Other SoCs have the vitcim_tlb_en feature mapped to bit[12]. This bit is set to
one by default. We need to preserve the bit when setting
F_MMU_TF_PROT_TO_PROGRAM_ADDR as otherwise the bit will be cleared and IOMMU
performance will drop.


> Suggested-by: Matthias Brugger <matthias.bgg at gmail.com>
> Suggested-by: Yong Wu <yong.wu at mediatek.com>
> Signed-off-by: Chao Hao <chao.hao at mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 8299a3299090..e46e2deee3fd 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -543,11 +543,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  		return ret;
>  	}
>  
> +	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);

The read is only needed in the else branch.

>  	if (data->plat_data->m4u_plat == M4U_MT8173)
>  		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
>  			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
>  	else
> -		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> +		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
>  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
>  
>  	regval = F_L2_MULIT_HIT_EN |
>