[v7, PATCH 6/7] drm/mediatek: add fifo_size into rdma private data

[Chun-Kuang Hu]

The primary thing of this patch is to get fifo size from device tree.
So you may modify title to show the primary thing.

Yongqiang Niu <yongqiang.niu at mediatek.com> 於 2020年7月23日 週四 上午10:12寫道：
>
> the fifo size of rdma in mt8183 is different.
> rdma0 fifo size is 5k
> rdma1 fifo size is 2k

I would like the description to be "Get the fifo size from device tree
because each rdma in the same SoC may have different fifo size."

Regards,
Chun-Kuang.

>
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> index e04319f..794acc5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> @@ -63,6 +63,7 @@ struct mtk_disp_rdma {
>         struct mtk_ddp_comp             ddp_comp;
>         struct drm_crtc                 *crtc;
>         const struct mtk_disp_rdma_data *data;
> +       u32                             fifo_size;
>  };
>
>  static inline struct mtk_disp_rdma *comp_to_rdma(struct mtk_ddp_comp *comp)
> @@ -131,12 +132,18 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
>         unsigned int threshold;
>         unsigned int reg;
>         struct mtk_disp_rdma *rdma = comp_to_rdma(comp);
> +       u32 rdma_fifo_size;
>
>         mtk_ddp_write_mask(cmdq_pkt, width, comp,
>                            DISP_REG_RDMA_SIZE_CON_0, 0xfff);
>         mtk_ddp_write_mask(cmdq_pkt, height, comp,
>                            DISP_REG_RDMA_SIZE_CON_1, 0xfffff);
>
> +       if (rdma->fifo_size)
> +               rdma_fifo_size = rdma->fifo_size;
> +       else
> +               rdma_fifo_size = RDMA_FIFO_SIZE(rdma);
> +
>         /*
>          * Enable FIFO underflow since DSI and DPI can't be blocked.
>          * Keep the FIFO pseudo size reset default of 8 KiB. Set the
> @@ -145,7 +152,7 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
>          */
>         threshold = width * height * vrefresh * 4 * 7 / 1000000;
>         reg = RDMA_FIFO_UNDERFLOW_EN |
> -             RDMA_FIFO_PSEUDO_SIZE(RDMA_FIFO_SIZE(rdma)) |
> +             RDMA_FIFO_PSEUDO_SIZE(rdma_fifo_size) |
>               RDMA_OUTPUT_VALID_FIFO_THRESHOLD(threshold);
>         mtk_ddp_write(cmdq_pkt, reg, comp, DISP_REG_RDMA_FIFO_CON);
>  }
> @@ -291,6 +298,16 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
>                 return comp_id;
>         }
>
> +       if (of_find_property(dev->of_node, "mediatek,rdma_fifo_size", &ret)) {
> +               ret = of_property_read_u32(dev->of_node,
> +                                          "mediatek,rdma_fifo_size",
> +                                          &priv->fifo_size);
> +               if (ret) {
> +                       dev_err(dev, "Failed to get rdma fifo size\n");
> +                       return ret;
> +               }
> +       }
> +
>         ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
>                                 &mtk_disp_rdma_funcs);
>         if (ret) {
> --
> 1.8.1.1.dirty
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek