[PATCH v4] scsi: ufs: Quiesce all scsi devices before shutdown

[Stanley Chu]

Currently I/O request could be still submitted to UFS device while
UFS is working on shutdown flow. This may lead to racing as below
scenarios and finally system may crash due to unclocked register
accesses.

To fix this kind of issues, specifically quiesce all SCSI devices
before UFS shutdown to block all I/O request sending from block
layer.

Example of racing scenario: While UFS device is runtime-suspended

Thread #1: Executing UFS shutdown flow, e.g.,
           ufshcd_suspend(UFS_SHUTDOWN_PM)
Thread #2: Executing runtime resume flow triggered by I/O request,
           e.g., ufshcd_resume(UFS_RUNTIME_PM)

This breaks the assumption that UFS PM flows can not be running
concurrently and some unexpected racing behavior may happen.

Signed-off-by: Stanley Chu <stanley.chu at mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 9d180da77488..2e18596f3a8e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -159,6 +159,12 @@ struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
 	{UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE},
 };
 
+#define ufshcd_scsi_for_each_sdev(fn) \
+	list_for_each_entry(starget, &hba->host->__targets, siblings) { \
+		__starget_for_each_device(starget, NULL, \
+					  fn); \
+	}
+
 static inline enum ufs_dev_pwr_mode
 ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl)
 {
@@ -8620,6 +8626,13 @@ int ufshcd_runtime_idle(struct ufs_hba *hba)
 }
 EXPORT_SYMBOL(ufshcd_runtime_idle);
 
+static void ufshcd_quiesce_sdev(struct scsi_device *sdev, void *data)
+{
+	/* Suspended devices are already quiesced so can be skipped */
+	if (!pm_runtime_suspended(&sdev->sdev_gendev))
+		scsi_device_quiesce(sdev);
+}
+
 /**
  * ufshcd_shutdown - shutdown routine
  * @hba: per adapter instance
@@ -8631,6 +8644,7 @@ EXPORT_SYMBOL(ufshcd_runtime_idle);
 int ufshcd_shutdown(struct ufs_hba *hba)
 {
 	int ret = 0;
+	struct scsi_target *starget;
 
 	if (!hba->is_powered)
 		goto out;
@@ -8644,6 +8658,21 @@ int ufshcd_shutdown(struct ufs_hba *hba)
 			goto out;
 	}
 
+	/*
+	 * Quiesce all SCSI devices to prevent any non-PM requests sending
+	 * from block layer during and after shutdown.
+	 *
+	 * Here we can not use blk_cleanup_queue() since PM requests
+	 * (with BLK_MQ_REQ_PREEMPT flag) are still required to be sent
+	 * through block layer. Therefore SCSI command queued after the
+	 * scsi_target_quiesce() call returned will block until
+	 * blk_cleanup_queue() is called.
+	 *
+	 * Besides, scsi_target_"un"quiesce (e.g., scsi_target_resume) can
+	 * be ignored since shutdown is one-way flow.
+	 */
+	ufshcd_scsi_for_each_sdev(ufshcd_quiesce_sdev);
+
 	ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM);
 out:
 	if (ret)
-- 
2.18.0