[PATCH v2 2/4] soc: mediatek: pwrap: add arbiter capability
Nicolas Boichat
drinkcat at chromium.org
Fri Jul 24 09:44:58 EDT 2020
On Thu, Jul 23, 2020 at 11:40 AM Hsin-Hsiung Wang
<hsin-hsiung.wang at mediatek.com> wrote:
>
> Add arbiter capability for pwrap driver.
> This patch is preparing for adding mt6873/8192 pwrap support.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang at mediatek.com>
> ---
> drivers/soc/mediatek/mtk-pmic-wrap.c | 67 ++++++++++++++++++++++++++++++------
> 1 file changed, 56 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
> index c897205..8d76ed4 100644
> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> @@ -24,11 +24,13 @@
> #define PWRAP_MT8135_BRIDGE_WDT_SRC_EN 0x54
>
> /* macro for wrapper status */
> +#define PWRAP_GET_SWINF_2_FSM(x) (((x) >> 1) & 0x00000007)
I find this macro name a bit weird, because you are actually using
this mask on PWRAP_WACS2_RDATA register value (just like
PWRAP_GET_WACS_FSM below).
Should it be something like PWRAP_GET_WACS_ARB_FSM?!
> #define PWRAP_GET_WACS_RDATA(x) (((x) >> 0) & 0x0000ffff)
> #define PWRAP_GET_WACS_FSM(x) (((x) >> 16) & 0x00000007)
> #define PWRAP_GET_WACS_REQ(x) (((x) >> 19) & 0x00000001)
> #define PWRAP_STATE_SYNC_IDLE0 BIT(20)
> #define PWRAP_STATE_INIT_DONE0 BIT(21)
> +#define PWRAP_STATE_INIT_DONE1 BIT(15)
>
> /* macro for WACS FSM */
> #define PWRAP_WACS_FSM_IDLE 0x00
> @@ -74,6 +76,7 @@
> #define PWRAP_CAP_DCM BIT(2)
> #define PWRAP_CAP_INT1_EN BIT(3)
> #define PWRAP_CAP_WDT_SRC1 BIT(4)
> +#define PWRAP_CAP_ARB BIT(5)
>
> /* defines for slave device wrapper registers */
> enum dew_regs {
> @@ -340,6 +343,8 @@ enum pwrap_regs {
> PWRAP_DCM_DBC_PRD,
> PWRAP_EINT_STA0_ADR,
> PWRAP_EINT_STA1_ADR,
> + PWRAP_SWINF_2_WDATA_31_0,
> + PWRAP_SWINF_2_RDATA_31_0,
>
> /* MT2701 only regs */
> PWRAP_ADC_CMD_ADDR,
> @@ -1108,16 +1113,30 @@ static void pwrap_writel(struct pmic_wrapper *wrp, u32 val, enum pwrap_regs reg)
>
> static bool pwrap_is_fsm_idle(struct pmic_wrapper *wrp)
> {
> - u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
> + u32 val;
> + bool ret;
> +
> + val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> + ret = (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE);
> + else
> + ret = (PWRAP_GET_SWINF_2_FSM(val) == PWRAP_WACS_FSM_IDLE);
>
> - return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE;
> + return ret;
Those !HAS_CAP tests are a little hard to read. Also, ret isn't really needed.
So I'd do this:
if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
return PWRAP_GET_SWINF_2_FSM(val) == PWRAP_WACS_FSM_IDLE;
return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE;
> }
>
> static bool pwrap_is_fsm_vldclr(struct pmic_wrapper *wrp)
> {
> - u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
> + u32 val;
> + bool ret;
> +
> + val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> + ret = (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR);
> + else
> + ret = (PWRAP_GET_SWINF_2_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR);
>
> - return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR;
> + return ret;
ditto
> }
>
> /*
> @@ -1172,13 +1191,21 @@ static int pwrap_read16(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
> return ret;
> }
>
> - pwrap_writel(wrp, (adr >> 1) << 16, PWRAP_WACS2_CMD);
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
ditto, I'd reverse all these tests.
> + pwrap_writel(wrp, (adr >> 1) << 16, PWRAP_WACS2_CMD);
> + else
> + pwrap_writel(wrp, adr, PWRAP_WACS2_CMD);
Not 100% convinced if worth it, but you could also do:
if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
val = adr;
else
val = (adr >> 1) << 16;
pwrap_writel(wrp, val, PWRAP_WACS2_CMD);
>
> ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr);
> if (ret)
> return ret;
>
> - *rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp, PWRAP_WACS2_RDATA));
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> + *rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp,
> + PWRAP_WACS2_RDATA));
> + else
> + *rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp,
> + PWRAP_SWINF_2_RDATA_31_0));
Similarly:
if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
val = pwrap_readl(wrp, PWRAP_SWINF_2_RDATA_31_0);
else
val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
*rdata = PWRAP_GET_WACS_RDATA(val);
(or set the register address in an `reg` variable)
>
> pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
>
> @@ -1228,8 +1255,13 @@ static int pwrap_write16(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
> return ret;
> }
>
> - pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata,
> - PWRAP_WACS2_CMD);
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB)) {
> + pwrap_writel(wrp, BIT(31) | ((adr >> 1) << 16) | wdata,
> + PWRAP_WACS2_CMD);
> + } else {
> + pwrap_writel(wrp, wdata, PWRAP_SWINF_2_WDATA_31_0);
> + pwrap_writel(wrp, BIT(29) | adr, PWRAP_WACS2_CMD);
> + }
>
> return 0;
> }
> @@ -2022,6 +2054,7 @@ MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
> static int pwrap_probe(struct platform_device *pdev)
> {
> int ret, irq;
> + u32 rdata;
> struct pmic_wrapper *wrp;
> struct device_node *np = pdev->dev.of_node;
> const struct of_device_id *of_slave_id = NULL;
> @@ -2116,14 +2149,22 @@ static int pwrap_probe(struct platform_device *pdev)
> }
> }
>
> - if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_INIT_DONE0)) {
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> + rdata = pwrap_readl(wrp, PWRAP_WACS2_RDATA) &
> + PWRAP_STATE_INIT_DONE0;
> + else
> + rdata = pwrap_readl(wrp, PWRAP_WACS2_RDATA) &
> + PWRAP_STATE_INIT_DONE1;
> + if (!rdata) {
Maybe:
if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
mask_done = PWRAP_STATE_INIT_DONE1;
else
mask_done = PWRAP_STATE_INIT_DONE0;
if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & mask_done)) {
> dev_dbg(wrp->dev, "initialization isn't finished\n");
> ret = -ENODEV;
> goto err_out2;
> }
>
> /* Initialize watchdog, may not be done by the bootloader */
> - pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> + pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
> +
> /*
> * Since STAUPD was not used on mt8173 platform,
> * so STAUPD of WDT_SRC which should be turned off
> @@ -2132,7 +2173,11 @@ static int pwrap_probe(struct platform_device *pdev)
> if (HAS_CAP(wrp->master->caps, PWRAP_CAP_WDT_SRC1))
> pwrap_writel(wrp, wrp->master->wdt_src, PWRAP_WDT_SRC_EN_1);
>
> - pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
> + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> + pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
> + else
> + pwrap_writel(wrp, 0x3, PWRAP_TIMER_EN);
> +
> pwrap_writel(wrp, wrp->master->int_en_all, PWRAP_INT_EN);
> /*
> * We add INT1 interrupt to handle starvation and request exception
> --
> 2.6.4
More information about the Linux-mediatek
mailing list