[PATCH 1/4] i2c: mediatek: Add apdma sync in i2c driver

[Matthias Brugger]

On 22/07/2020 14:31, Qii Wang wrote:
> With the apdma remove hand-shake signal, it need to keep i2c and
> apdma in sync manually.
> 
> Signed-off-by: Qii Wang <qii.wang at mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>

> ---
>   drivers/i2c/busses/i2c-mt65xx.c | 23 ++++++++++++++++++++---
>   1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index deef69e..e6b984a 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -48,6 +48,9 @@
>   
>   #define I2C_DMA_CON_TX			0x0000
>   #define I2C_DMA_CON_RX			0x0001
> +#define I2C_DMA_ASYNC_MODE		0x0004
> +#define I2C_DMA_SKIP_CONFIG		0x0010
> +#define I2C_DMA_DIR_CHANGE		0x0200
>   #define I2C_DMA_START_EN		0x0001
>   #define I2C_DMA_INT_FLAG_NONE		0x0000
>   #define I2C_DMA_CLR_FLAG		0x0000
> @@ -205,6 +208,7 @@ struct mtk_i2c_compatible {
>   	unsigned char timing_adjust: 1;
>   	unsigned char dma_sync: 1;
>   	unsigned char ltiming_adjust: 1;
> +	unsigned char apdma_sync: 1;
>   };
>   
>   struct mtk_i2c_ac_timing {
> @@ -311,6 +315,7 @@ struct i2c_spec_values {
>   	.timing_adjust = 1,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>   };
>   
>   static const struct mtk_i2c_compatible mt6577_compat = {
> @@ -324,6 +329,7 @@ struct i2c_spec_values {
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>   };
>   
>   static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -337,6 +343,7 @@ struct i2c_spec_values {
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>   };
>   
>   static const struct mtk_i2c_compatible mt7622_compat = {
> @@ -350,6 +357,7 @@ struct i2c_spec_values {
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>   };
>   
>   static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -362,6 +370,7 @@ struct i2c_spec_values {
>   	.timing_adjust = 0,
>   	.dma_sync = 0,
>   	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>   };
>   
>   static const struct mtk_i2c_compatible mt8183_compat = {
> @@ -375,6 +384,7 @@ struct i2c_spec_values {
>   	.timing_adjust = 1,
>   	.dma_sync = 1,
>   	.ltiming_adjust = 1,
> +	.apdma_sync = 0,
>   };
>   
>   static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -798,6 +808,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   	u16 start_reg;
>   	u16 control_reg;
>   	u16 restart_flag = 0;
> +	u16 dma_sync = 0;
>   	u32 reg_4g_mode;
>   	u8 *dma_rd_buf = NULL;
>   	u8 *dma_wr_buf = NULL;
> @@ -851,10 +862,16 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   		mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
>   	}
>   
> +	if (i2c->dev_comp->apdma_sync) {
> +		dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE;
> +		if (i2c->op == I2C_MASTER_WRRD)
> +			dma_sync |= I2C_DMA_DIR_CHANGE;
> +	}
> +
>   	/* Prepare buffer data to start transfer */
>   	if (i2c->op == I2C_MASTER_RD) {
>   		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
> -		writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
> +		writel(I2C_DMA_CON_RX | dma_sync, i2c->pdmabase + OFFSET_CON);
>   
>   		dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
>   		if (!dma_rd_buf)
> @@ -877,7 +894,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   		writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
>   	} else if (i2c->op == I2C_MASTER_WR) {
>   		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
> -		writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
> +		writel(I2C_DMA_CON_TX | dma_sync, i2c->pdmabase + OFFSET_CON);
>   
>   		dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
>   		if (!dma_wr_buf)
> @@ -900,7 +917,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>   		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
>   	} else {
>   		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
> -		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
> +		writel(I2C_DMA_CLR_FLAG | dma_sync, i2c->pdmabase + OFFSET_CON);
>   
>   		dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
>   		if (!dma_wr_buf)
>