[RESEND v3 PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code

[Chunfeng Yun]

Use readl_poll_timeout() to poll register status

Cc: Florian Fainelli <f.fainelli at gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
---
v3 changes:
  1. indent code to match open parenthesis suggested by Florian
  2. add Reviewed-by Florian

v2 changes, suggested by Stephen:
  1. use unsigned int instead of int for @usec parameter
  2. add dev_log() back
  3. drop "Err" in error log
---
 drivers/usb/gadget/udc/bdc/bdc_core.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 02a3a77..d567e20 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -12,6 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/list.h>
@@ -29,24 +30,19 @@
 #include "bdc_dbg.h"
 
 /* Poll till controller status is not OIP */
-static int poll_oip(struct bdc *bdc, int usec)
+static int poll_oip(struct bdc *bdc, u32 usec)
 {
 	u32 status;
-	/* Poll till STS!= OIP */
-	while (usec) {
-		status = bdc_readl(bdc->regs, BDC_BDCSC);
-		if (BDC_CSTS(status) != BDC_OIP) {
-			dev_dbg(bdc->dev,
-				"poll_oip complete status=%d",
-				BDC_CSTS(status));
-			return 0;
-		}
-		udelay(10);
-		usec -= 10;
-	}
-	dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
+	int ret;
 
-	return -ETIMEDOUT;
+	ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
+				 (BDC_CSTS(status) != BDC_OIP), 10, usec);
+	if (ret)
+		dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
+	else
+		dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status));
+
+	return ret;
 }
 
 /* Stop the BDC controller */
-- 
1.9.1