[PATCH v5 3/3] binder: add transaction latency tracer

Todd Kjos tkjos at google.com
Mon Jul 20 14:56:25 EDT 2020


On Wed, Jun 10, 2020 at 5:34 AM Frankie Chang
<Frankie.Chang at mediatek.com> wrote:
>
> From: "Frankie.Chang" <Frankie.Chang at mediatek.com>
>
> Record start/end timestamp for binder transaction.
> When transaction is completed or transaction is free,
> it would be checked if transaction latency over threshold (2 sec),
> if yes, printing related information for tracing.
>
> /* Implement details */
> - Add latency tracer module to monitor transaction
>   by attaching to new tracepoints introduced
>   when transactions are allocated and freed.
>   The trace_binder_txn_latency_free would not be enabled
>   by default. Monitoring which transaction is too slow to
>   cause some of exceptions is important. So we hook the
>   tracepoint to call the monitor function.
>
> - Since some of modules would trigger timeout NE
>   if their binder transaction don't finish in time,
>   such as audio timeout (5 sec), even BT command
>   timeout (2 sec), etc.
>   Therefore, setting the timeout threshold as 2 seconds
>   could be helpful to debug.

Could there be cases that 500ms is too long so 1s should be the
threshold? Hard coded 2 seconds makes this less useful. How about
making it configurable with a default of 2 sec?

>
> - The reason why printing the related information to
>   kernel information log but not trace buffer is that
>   some abnormal transactions may be pending for a long
>   time ago, they could not be recorded due to buffer
>   limited.
>
> Signed-off-by: Frankie.Chang <Frankie.Chang at mediatek.com>
> ---
>  drivers/android/Kconfig                 |    8 +++
>  drivers/android/Makefile                |    1 +
>  drivers/android/binder.c                |    2 +
>  drivers/android/binder_internal.h       |   13 ++++
>  drivers/android/binder_latency_tracer.c |  107 +++++++++++++++++++++++++++++++
>  drivers/android/binder_trace.h          |   28 +++++++-
>  6 files changed, 156 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/android/binder_latency_tracer.c
>
> diff --git a/drivers/android/Kconfig b/drivers/android/Kconfig
> index 6fdf2ab..39d47be 100644
> --- a/drivers/android/Kconfig
> +++ b/drivers/android/Kconfig
> @@ -54,6 +54,14 @@ config ANDROID_BINDER_IPC_SELFTEST
>           exhaustively with combinations of various buffer sizes and
>           alignments.
>
> +config BINDER_TRANSACTION_LATENCY_TRACKING
> +       bool "Android Binder transaction tracking"

Any reason this can't be tristate?

> +       help
> +         Used for track abnormal binder transaction which is over 2 seconds,
> +         when the transaction is done or be free, this transaction would be
> +         checked whether it executed overtime.
> +         If yes, printing out the detailed info.
> +
>  endif # if ANDROID
>
>  endmenu
> diff --git a/drivers/android/Makefile b/drivers/android/Makefile
> index c9d3d0c9..c2ffdb6 100644
> --- a/drivers/android/Makefile
> +++ b/drivers/android/Makefile
> @@ -4,3 +4,4 @@ ccflags-y += -I$(src)                   # needed for trace events
>  obj-$(CONFIG_ANDROID_BINDERFS)         += binderfs.o
>  obj-$(CONFIG_ANDROID_BINDER_IPC)       += binder.o binder_alloc.o
>  obj-$(CONFIG_ANDROID_BINDER_IPC_SELFTEST) += binder_alloc_selftest.o
> +obj-$(CONFIG_BINDER_TRANSACTION_LATENCY_TRACKING)      += binder_latency_tracer.o
> diff --git a/drivers/android/binder.c b/drivers/android/binder.c
> index 5ec9af8..846d69b 100644
> --- a/drivers/android/binder.c
> +++ b/drivers/android/binder.c
> @@ -2657,6 +2657,7 @@ static void binder_transaction(struct binder_proc *proc,
>                 return_error_line = __LINE__;
>                 goto err_alloc_t_failed;
>         }
> +       trace_binder_txn_latency_alloc(t, e);
>         INIT_LIST_HEAD(&t->fd_fixups);
>         binder_stats_created(BINDER_STAT_TRANSACTION);
>         spin_lock_init(&t->lock);
> @@ -5144,6 +5145,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m,
>                    to_proc ? to_proc->pid : 0,
>                    t->to_thread ? t->to_thread->pid : 0,
>                    t->code, t->flags, t->priority, t->need_reply);
> +       trace_binder_txn_latency_info(m, t);
>         spin_unlock(&t->lock);
>
>         if (proc != to_proc) {
> diff --git a/drivers/android/binder_internal.h b/drivers/android/binder_internal.h
> index ed61b3e..bebc185 100644
> --- a/drivers/android/binder_internal.h
> +++ b/drivers/android/binder_internal.h
> @@ -12,6 +12,11 @@
>  #include <linux/types.h>
>  #include <linux/uidgid.h>
>
> +#ifdef CONFIG_BINDER_TRANSACTION_LATENCY_TRACKING
> +#include <linux/rtc.h>
> +#include <linux/time.h>
> +#endif
> +
>  struct binder_context {
>         struct binder_node *binder_context_mgr_node;
>         struct mutex context_mgr_node_lock;
> @@ -131,6 +136,10 @@ struct binder_transaction_log_entry {
>         uint32_t return_error;
>         uint32_t return_error_param;
>         char context_name[BINDERFS_MAX_NAME + 1];
> +#ifdef CONFIG_BINDER_TRANSACTION_LATENCY_TRACKING

If you make binder_latency_tracer a module, then we could include
these fields unconditionally. Please add comments or give them better
names so it is obvious what they are for.

> +       struct timespec timestamp;
> +       struct timeval tv;
> +#endif
>  };
>
>  struct binder_transaction_log {
> @@ -520,6 +529,10 @@ struct binder_transaction {
>          * during thread teardown
>          */
>         spinlock_t lock;
> +#ifdef CONFIG_BINDER_TRANSACTION_LATENCY_TRACKING

If you make binder_latency_tracer a module, then we could include
these fields unconditionally. Please add comments or give them better
names so it is obvious what they are for.

> +       struct timespec timestamp;
> +       struct timeval tv;
> +#endif
>  };
>
>  /**
> diff --git a/drivers/android/binder_latency_tracer.c b/drivers/android/binder_latency_tracer.c
> new file mode 100644
> index 0000000..1b89634
> --- /dev/null
> +++ b/drivers/android/binder_latency_tracer.c
> @@ -0,0 +1,107 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + */
> +
> +#include <linux/module.h>
> +#include <uapi/linux/android/binder.h>
> +#include "binder_alloc.h"
> +#include "binder_internal.h"
> +#include "binder_trace.h"
> +
> +/*
> + * probe_binder_txn_latency_free - Output info of a delay transaction
> + * @t:          pointer to the over-time transaction
> + */
> +void probe_binder_txn_latency_free(void *ignore, struct binder_transaction *t)
> +{
> +       struct rtc_time tm;
> +       struct timespec *startime;
> +       struct timespec cur, sub_t;
> +
> +       ktime_get_ts(&cur);
> +       startime = &t->timestamp;
> +       sub_t = timespec_sub(cur, *startime);
> +
> +       /* if transaction time is over than 2 sec,
> +        * show timeout warning log.
> +        */
> +       if (sub_t.tv_sec < 2)
> +               return;

I still don't get why 2sec is magical. Should this threshold be configurable?

> +
> +       rtc_time_to_tm(t->tv.tv_sec, &tm);
> +
> +       spin_lock(&t->lock);
> +       pr_info_ratelimited("%d: from %d:%d to %d:%d",
> +                       t->debug_id,
> +                       t->from ? t->from->proc->pid : 0,
> +                       t->from ? t->from->pid : 0,
> +                       t->to_proc ? t->to_proc->pid : 0,
> +                       t->to_thread ? t->to_thread->pid : 0);
> +
> +       pr_info_ratelimited(" total %u.%03ld s code %u start %lu.%03ld android %d-%02d-%02d %02d:%02d:%02d.%03lu\n",
> +                       (unsigned int)sub_t.tv_sec,
> +                       (sub_t.tv_nsec / NSEC_PER_MSEC),
> +                       t->code,
> +                       (unsigned long)startime->tv_sec,
> +                       (startime->tv_nsec / NSEC_PER_MSEC),
> +                       (tm.tm_year + 1900), (tm.tm_mon + 1), tm.tm_mday,
> +                       tm.tm_hour, tm.tm_min, tm.tm_sec,
> +                       (unsigned long)(t->tv.tv_usec / USEC_PER_MSEC));
> +       spin_unlock(&t->lock);
> +}
> +
> +static void probe_binder_txn_latency_alloc(void *ignore,
> +                                       struct binder_transaction *t,
> +                                       struct binder_transaction_log_entry *e)
> +{
> +       ktime_get_ts(&e->timestamp);
> +       do_gettimeofday(&e->tv);
> +       e->tv.tv_sec -= (sys_tz.tz_minuteswest * 60);
> +       spin_lock(&t->lock);
> +       memcpy(&t->timestamp, &e->timestamp, sizeof(struct timespec));
> +       memcpy(&t->tv, &e->tv, sizeof(struct timeval));
> +       spin_unlock(&t->lock);

Why is the lock needed here?

> +}
> +
> +static void probe_binder_txn_latency_info(void *ignore, struct seq_file *m,
> +                                       struct binder_transaction *t)
> +{
> +       struct rtc_time tm;
> +
> +       rtc_time_to_tm(t->tv.tv_sec, &tm);
> +       seq_printf(m,
> +                  " start %lu.%06lu android %d-%02d-%02d %02d:%02d:%02d.%03lu",
> +                  (unsigned long)t->timestamp.tv_sec,
> +                  (t->timestamp.tv_nsec / NSEC_PER_USEC),
> +                  (tm.tm_year + 1900), (tm.tm_mon + 1), tm.tm_mday,
> +                  tm.tm_hour, tm.tm_min, tm.tm_sec,
> +                  (unsigned long)(t->tv.tv_usec / USEC_PER_MSEC));
> +}
> +
> +static int __init init_binder_latency_tracer(void)
> +{
> +       register_trace_binder_txn_latency_free(
> +                       probe_binder_txn_latency_free, NULL);
> +       register_trace_binder_txn_latency_alloc(
> +                       probe_binder_txn_latency_alloc, NULL);
> +       register_trace_binder_txn_latency_info(
> +                       probe_binder_txn_latency_info, NULL);
> +
> +       return 0;
> +}
> +
> +static void exit_binder_latency_tracer(void)
> +{
> +       unregister_trace_binder_txn_latency_free(
> +                       probe_binder_txn_latency_free, NULL);
> +       unregister_trace_binder_txn_latency_alloc(
> +                       probe_binder_txn_latency_alloc, NULL);
> +       unregister_trace_binder_txn_latency_info(
> +                       probe_binder_txn_latency_info, NULL);
> +}
> +
> +module_init(init_binder_latency_tracer);
> +module_exit(exit_binder_latency_tracer);
> +
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/android/binder_trace.h b/drivers/android/binder_trace.h
> index 8ac87d1..ca41c7d 100644
> --- a/drivers/android/binder_trace.h
> +++ b/drivers/android/binder_trace.h
> @@ -18,6 +18,7 @@
>  struct binder_ref_data;
>  struct binder_thread;
>  struct binder_transaction;
> +struct binder_transaction_log_entry;
>
>  TRACE_EVENT(binder_ioctl,
>         TP_PROTO(unsigned int cmd, unsigned long arg),
> @@ -95,6 +96,18 @@
>                   __entry->thread_todo)
>  );
>
> +DECLARE_TRACE(binder_txn_latency_alloc,
> +       TP_PROTO(struct binder_transaction *t,
> +                struct binder_transaction_log_entry *e),
> +       TP_ARGS(t, e)
> +);
> +
> +DECLARE_TRACE(binder_txn_latency_info,
> +       TP_PROTO(struct seq_file *m,
> +                struct binder_transaction *t),
> +       TP_ARGS(m, t)
> +);
> +
>  TRACE_EVENT(binder_txn_latency_free,
>         TP_PROTO(struct binder_transaction *t),
>         TP_ARGS(t),
> @@ -106,6 +119,8 @@
>                 __field(int, to_thread)
>                 __field(unsigned int, code)
>                 __field(unsigned int, flags)
> +               __field(unsigned long, start_sec)
> +               __field(unsigned long, start_nsec)
>         ),
>         TP_fast_assign(
>                 __entry->debug_id = t->debug_id;
> @@ -115,11 +130,18 @@
>                 __entry->to_thread = t->to_thread ? t->to_thread->pid : 0;
>                 __entry->code = t->code;
>                 __entry->flags = t->flags;
> -       ),
> -       TP_printk("transaction=%d from %d:%d to %d:%d flags=0x%x code=0x%x",
> +#ifdef CONFIG_BINDER_TRANSACTION_LATENCY_TRACKING
> +               __entry->start_sec = t->timestamp.tv_sec;
> +               __entry->start_nsec = t->timestamp.tv_nsec / NSEC_PER_MSEC;
> +#else
> +               __entry->start_sec = 0;
> +               __entry->start_nsec = 0;
> +#endif
> +       ),
> +       TP_printk("transaction=%d from %d:%d to %d:%d flags=0x%x code=0x%x start %lu.%03ld",
>                   __entry->debug_id, __entry->from_proc, __entry->from_thread,
>                   __entry->to_proc, __entry->to_thread, __entry->code,
> -                 __entry->flags)
> +                 __entry->flags, __entry->start_sec, __entry->start_nsec)
>  );
>
>  TRACE_EVENT(binder_transaction,
> --
> 1.7.9.5



More information about the Linux-mediatek mailing list