Thank you Sergey for looking into this. Adding folks working on this
platform to perform validation of the proposed patch.
Best,
Daniel
On Tue, Jul 14, 2020 at 5:41 AM Serge Semin
<Sergey.Semin at baikalelectronics.ru> wrote:
>
> Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
> port") fixed limits of a baud rate setting for a generic 8250 port.
> In other words since that commit the baud rate has been permitted to be
> within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
> normal for a standard 8250 UART port. But there are custom 8250 ports,
> which provide extended baud rate limits. In particular the Mediatek 8250
> port can work with baud rates up to "uartclk" speed.
>
> Normally that and any other peculiarity is supposed to be handled in a
> custom set_termios() callback implemented in the vendor-specific
> 8250-port glue-driver. Currently that is how it's done for the most of
> the vendor-specific 8250 ports, but for some reason for Mediatek a
> solution has been spread out to both the glue-driver and to the generic
> 8250-port code. Due to that a bug has been introduced, which permitted the
> extended baud rate limit for all even for standard 8250-ports. The bug
> has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
> limit in generic 8250 port") by narrowing the baud rates limit back down to
> the normal bounds. Unfortunately by doing so we also broke the
> Mediatek-specific extended bauds feature.
>
> A fix of the problem described above is twofold. First since we can't get
> back the extended baud rate limits feature to the generic set_termios()
> function and that method supports only a standard baud rates range, the
> requested baud rate must be locally stored before calling it and then
> restored back to the new termios structure after the generic set_termios()
> finished its magic business. By doing so we still use the
> serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
> while the extended baud rate setting procedure will be performed later in
> the custom Mediatek-specific set_termios() callback. Second since a true
> baud rate is now fully calculated in the custom set_termios() method we
> need to locally update the port timeout by calling the
> uart_update_timeout() function. After the fixes described above are
> implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
> get back to normally working with extended baud rates.
>
> Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com
>
> Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port")
> Reported-by: Daniel Winkler <danielwinkler at google.com>
> Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
>
> ---
>
> Folks, sorry for a delay with the problem fix. A solution is turned out to
> be a bit more complicated than I originally thought in my comment to the
> Daniel revert-patch.
>
> Please also note, that I don't have a Mediatek hardware to test the
> solution suggested in the patch. The code is written as on so called
> the tip of the pen after digging into the 8250_mtk.c and 8250_port.c
> drivers code. So please Daniel or someone with Mediatek 8250-port
> available on a board test this patch first and report about the results in
> reply to this emailing thread. After that, if your conclusion is positive
> and there is no objection against the solution design the patch can be
> merged in.
>
> Cc: Alexey Malahov <Alexey.Malahov at baikalelectronics.ru>
> Cc: Daniel Winkler <danielwinkler at google.com>
> Cc: Aaron Sierra <asierra at xes-inc.com>
> Cc: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> Cc: Lukas Wunner <lukas at wunner.de>
> Cc: Vignesh Raghavendra <vigneshr at ti.com>
> Cc: linux-serial at vger.kernel.org
> Cc: linux-mediatek at lists.infradead.org
> Cc: BlueZ <linux-bluetooth at vger.kernel.org>
> Cc: chromeos-bluetooth-upstreaming <chromeos-bluetooth-upstreaming at chromium.org>
> Cc: abhishekpandit at chromium.org
> Cc: stable at vger.kernel.org
> ---
> drivers/tty/serial/8250/8250_mtk.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
> index f839380c2f4c..98b8a3e30733 100644
> --- a/drivers/tty/serial/8250/8250_mtk.c
> +++ b/drivers/tty/serial/8250/8250_mtk.c
> @@ -306,8 +306,21 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
> }
> #endif
>
> + /*
> + * Store the requested baud rate before calling the generic 8250
> + * set_termios method. Standard 8250 port expects bauds to be
> + * no higher than (uartclk / 16) so the baud will be clamped if it
> + * gets out of that bound. Mediatek 8250 port supports speed
> + * higher than that, therefore we'll get original baud rate back
> + * after calling the generic set_termios method and recalculate
> + * the speed later in this method.
> + */
> + baud = tty_termios_baud_rate(termios);
> +
> serial8250_do_set_termios(port, termios, old);
>
> + tty_termios_encode_baud_rate(termios, baud, baud);
> +
> /*
> * Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS)
> *
> @@ -339,6 +352,11 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
> */
> spin_lock_irqsave(&port->lock, flags);
>
> + /*
> + * Update the per-port timeout.
> + */
> + uart_update_timeout(port, termios->c_cflag, baud);
> +
> /* set DLAB we have cval saved in up->lcr from the call to the core */
> serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
> serial_dl_write(up, quot);
> --
> 2.26.2
>