[PATCH 6/9] usb: gadget: bdc: fix check warning of block comments alignment

Chunfeng Yun chunfeng.yun at mediatek.com
Tue Jul 14 04:48:51 EDT 2020


fix the warning:
  WARNING:BLOCK_COMMENT_STYLE:
  Block comments should align the * on each line

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 drivers/usb/gadget/udc/bdc/bdc.h     | 2 +-
 drivers/usb/gadget/udc/bdc/bdc_ep.c  | 2 +-
 drivers/usb/gadget/udc/bdc/bdc_udc.c | 6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
index 9615438..6940934 100644
--- a/drivers/usb/gadget/udc/bdc/bdc.h
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -35,7 +35,7 @@
 /*
  * Maximum size of ep0 response buffer for ch9 requests,
  * the set_sel request uses 6 so far, the max.
-*/
+ */
 #define EP0_RESPONSE_BUFF  6
 /* Start with SS as default */
 #define EP0_MAX_PKT_SIZE 512
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index 0c44002..eea66d5 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -68,7 +68,7 @@ static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs)
 		 * check if the bd_table struct is allocated ?
 		 * if yes, then check if bd memory has been allocated, then
 		 * free the dma_pool and also the bd_table struct memory
-		*/
+		 */
 		bd_table = bd_list->bd_table_array[index];
 		dev_dbg(bdc->dev, "bd_table:%p index:%d\n", bd_table, index);
 		if (!bd_table) {
diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
index 15652c5..ba9365e 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_udc.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -164,7 +164,7 @@ static void bdc_func_wake_timer(struct work_struct *work)
 	/*
 	 * Check if host has started transferring on endpoints
 	 * FUNC_WAKE_ISSUED is cleared when transfer has started after resume
-	*/
+	 */
 	if (bdc->devstatus & FUNC_WAKE_ISSUED) {
 		dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n");
 		/* flag is still set, so again send func wake */
@@ -205,7 +205,7 @@ static void handle_link_state_change(struct bdc *bdc, u32 uspc)
 				 * if not then send function wake again every
 				 * TNotification secs until host initiates
 				 * transfer to BDC, USB3 spec Table 8.13
-				*/
+				 */
 				schedule_delayed_work(
 						&bdc->func_wake_notify,
 						msecs_to_jiffies(BDC_TNOTIFY));
@@ -379,7 +379,7 @@ static int bdc_udc_start(struct usb_gadget *gadget,
 	 * Run the controller from here and when BDC is connected to
 	 * Host then driver will receive a USPC SR with VBUS present
 	 * and then driver will do a softconnect.
-	*/
+	 */
 	ret = bdc_run(bdc);
 	if (ret) {
 		dev_err(bdc->dev, "%s bdc run fail\n", __func__);
-- 
1.9.1


More information about the Linux-mediatek mailing list