[RFC PATCH] usb: dwc3: fix maximum_speed check for usb2.0-only core

[Chunfeng Yun]

The maximum_speed will be USB_SPEED_SUPER_PLUS, but the
maximum_speed check for usb2.0-only core doesn't consider it,
so fix it, and move the ckeck into dwc3_check_params().

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
Note:

When I look at the code, find that this may be a problem, but no
platform to test it.
---
 drivers/usb/dwc3/core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 25c686a7..ffd5ab3 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -930,13 +930,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	 */
 	dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
 
-	/* Handle USB2.0-only core configuration */
-	if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
-			DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
-		if (dwc->maximum_speed == USB_SPEED_SUPER)
-			dwc->maximum_speed = USB_SPEED_HIGH;
-	}
-
 	ret = dwc3_phy_setup(dwc);
 	if (ret)
 		goto err0;
@@ -1426,6 +1419,13 @@ static void dwc3_check_params(struct dwc3 *dwc)
 
 		break;
 	}
+
+	/* Handle USB2.0-only core configuration */
+	if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+			DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
+		if (dwc->maximum_speed > USB_SPEED_HIGH)
+			dwc->maximum_speed = USB_SPEED_HIGH;
+	}
 }
 
 static int dwc3_probe(struct platform_device *pdev)
-- 
1.9.1