[RFC PATCH V7 3/3] dts: arm64: mt8183: Add sensor interface nodes

[Louis Kuo]

Add nodes for Mediatek's sensor interface device. Sensor interface module
embedded in Mediatek SOCs, works as a HW camera interface controller
intended for image and data transmission between cameras and host devices.

Signed-off-by: Louis Kuo <louis.kuo at mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7b781eb7edd7..d487e539705c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -762,5 +762,31 @@
 			reg = <0 0x1a000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
+
+		seninf: seninf at 1a040000 {
+			compatible = "mediatek,mt8183-seninf";
+			reg = <0 0x1a040000 0 0x8000>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+			clocks = <&camsys CLK_CAM_SENINF>,
+				 <&topckgen CLK_TOP_MUX_SENINF>;
+			clock-names = "cam_seninf", "top_mux_seninf";
+			phys = <&mipi_dphy 0>;
+			phy-names = "seninf";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 4 {
+					reg = <4>;
+
+					seninf_camisp_endpoint: endpoint {
+						remote-endpoint = <&camisp_endpoint>;
+					};
+				};
+			};
+		};
 	};
 };
--
2.18.0