[PATCH v2 5/8] soc: mediatek: cmdq: add write_s value function

Dennis YC Hsieh dennis-yc.hsieh at mediatek.com
Sun Jul 5 02:48:32 EDT 2020


add write_s function in cmdq helper functions which
writes a constant value to address with large dma
access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh at mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c |   14 ++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  |   13 +++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ed9f5e63c195..4e86b65815fc 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -280,6 +280,20 @@ int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
 
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+			   u16 addr_low, u32 value)
+{
+	struct cmdq_instruction inst = {};
+
+	inst.op = CMDQ_CODE_WRITE_S;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.value = value;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_value);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index cd7ec714344e..ae73e10da274 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -152,6 +152,19 @@ int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
 			  u16 addr_low, u16 src_reg_idx, u32 mask);
 
 /**
+ * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which
+ *			      write value to a physical address
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @value:	the specified target value
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+			   u16 addr_low, u32 value);
+
+/**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
  * @event:	the desired event type to "wait and CLEAR"
-- 
1.7.9.5


More information about the Linux-mediatek mailing list