[PATCH V12 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver

[Dongchun Zhu]

On Thu, 2020-07-02 at 19:52 +0800, Dongchun Zhu wrote:
> Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> Reviewed-by: Tomasz Figa <tfiga at chromium.org>
> Signed-off-by: Dongchun Zhu <dongchun.zhu at mediatek.com>
> ---
>  MAINTAINERS                 |    1 +
>  drivers/media/i2c/Kconfig   |   13 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/ov02a10.c | 1052 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 1067 insertions(+)
>  create mode 100644 drivers/media/i2c/ov02a10.c
> 

[snip]

> +static int ov02a10_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct ov02a10 *ov02a10;
> +	unsigned int rotation;
> +	unsigned int clock_lane_tx_speed;
> +	unsigned int i;
> +	int ret;
> +
> +	ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL);
> +	if (!ov02a10)
> +		return -ENOMEM;
> +
> +	ret = ov02a10_check_hwcfg(dev, ov02a10);
> +	if (ret) {
> +		dev_err(dev, "failed to check HW configuration: %d", ret);
> +		return ret;
> +	}
> +
> +	v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops);
> +	ov02a10->mipi_clock_tx_speed = OV02A10_MIPI_TX_SPEED_DEFAULT;
> +	ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +
> +	/* Optional indication of physical rotation of sensor */
> +	ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", &rotation);
> +	if (!ret && rotation == 180) {
> +		ov02a10->upside_down = true;
> +		ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> +	}
> +
> +	/* Optional indication of mipi TX speed */
> +	ret = fwnode_property_read_u32(dev_fwnode(dev), "ovti,mipi-tx-speed",
> +				       &clock_lane_tx_speed);
> +
> +	if (!ret)
> +		ov02a10->mipi_clock_tx_speed = clock_lane_tx_speed;
> +
> +	/* Get system clock (eclk) */
> +	ov02a10->eclk = devm_clk_get(dev, "eclk");
> +	if (IS_ERR(ov02a10->eclk)) {
> +		ret = PTR_ERR(ov02a10->eclk);
> +		dev_err(dev, "failed to get eclk %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
> +				       &ov02a10->eclk_freq);
> +	if (ret) {
> +		dev_err(dev, "failed to get eclk frequency\n");
> +		return ret;
> +	}
> +
> +	ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq);
> +	if (ret) {
> +		dev_err(dev, "failed to set eclk frequency (24MHz)\n");
> +		return ret;
> +	}
> +
> +	if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) {
> +		dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n",
> +			 ov02a10->eclk_freq, OV02A10_ECLK_FREQ);

It seems to have a build-warning here.
Fixed in next release.

> +		return -EINVAL;
> +	}
> +
> +	ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ov02a10->pd_gpio)) {
> +		ret = PTR_ERR(ov02a10->pd_gpio);
> +		dev_err(dev, "failed to get powerdown-gpios %d\n", ret);
> +		return ret;
> +	}
> +
> +	ov02a10->rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ov02a10->rst_gpio)) {
> +		ret = PTR_ERR(ov02a10->rst_gpio);
> +		dev_err(dev, "failed to get reset-gpios %d\n", ret);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(ov02a10_supply_names); i++)
> +		ov02a10->supplies[i].supply = ov02a10_supply_names[i];
> +
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ov02a10_supply_names),
> +				      ov02a10->supplies);
> +	if (ret) {
> +		dev_err(dev, "failed to get regulators\n");
> +		return ret;
> +	}
> +
> +	mutex_init(&ov02a10->mutex);
> +	ov02a10->cur_mode = &supported_modes[0];
> +
> +	ret = ov02a10_initialize_controls(ov02a10);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize controls\n");
> +		goto err_destroy_mutex;
> +	}
> +
> +	ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops;
> +	ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE;
> +
> +	ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to init entity pads: %d", ret);
> +		goto err_free_handler;
> +	}
> +
> +	pm_runtime_enable(dev);
> +	if (!pm_runtime_enabled(dev)) {
> +		ret = ov02a10_power_on(dev);
> +		if (ret < 0) {
> +			dev_err(dev, "failed to power on: %d\n", ret);
> +			goto err_clean_entity;
> +		}
> +	}
> +
> +	ret = v4l2_async_register_subdev(&ov02a10->subdev);
> +	if (ret) {
> +		dev_err(dev, "failed to register V4L2 subdev: %d", ret);
> +		goto err_power_off;
> +	}
> +
> +	return 0;
> +
> +err_power_off:
> +	if (pm_runtime_enabled(dev))
> +		pm_runtime_disable(dev);
> +	else
> +		ov02a10_power_off(dev);
> +err_clean_entity:
> +	media_entity_cleanup(&ov02a10->subdev.entity);
> +err_free_handler:
> +	v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler);
> +err_destroy_mutex:
> +	mutex_destroy(&ov02a10->mutex);
> +
> +	return ret;
> +}
> +
> +static int ov02a10_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> +	pm_runtime_disable(&client->dev);
> +	if (!pm_runtime_status_suspended(&client->dev))
> +		ov02a10_power_off(&client->dev);
> +	pm_runtime_set_suspended(&client->dev);
> +	mutex_destroy(&ov02a10->mutex);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ov02a10_of_match[] = {
> +	{ .compatible = "ovti,ov02a10" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, ov02a10_of_match);
> +
> +static struct i2c_driver ov02a10_i2c_driver = {
> +	.driver = {
> +		.name = "ov02a10",
> +		.pm = &ov02a10_pm_ops,
> +		.of_match_table = ov02a10_of_match,
> +	},
> +	.probe_new	= &ov02a10_probe,
> +	.remove		= &ov02a10_remove,
> +};
> +
> +module_i2c_driver(ov02a10_i2c_driver);
> +
> +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu at mediatek.com>");
> +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver");
> +MODULE_LICENSE("GPL v2");
> +

When applying the patch with git am, there would be a warning here.
-----------------8<-------------------
[mtk15013 at mhfsdclx116 mediatek]$git am -s
~/bak/media-i2c-Add-support-for-OV02A10-sensor.patch
Applying: media: dt-bindings: media: i2c: Document OV02A10 bindings
Applying: media: i2c: ov02a10: Add OV02A10 image sensor driver
.git/rebase-apply/patch:1114: new blank line at EOF.
+
warning: 1 line adds whitespace errors.
-----------------8<-------------------

Fixed in next release.