[PATCH V11 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver

[Dongchun Zhu]

Hi Tomasz, Sakari,

Thanks for the review.

On Tue, 2020-06-30 at 21:47 +0300, Sakari Ailus wrote:
> On Tue, Jun 30, 2020 at 05:07:46PM +0000, Tomasz Figa wrote:
> > Hi Dongchun,
> > 
> > On Tue, Jun 30, 2020 at 10:49:42AM +0800, Dongchun Zhu wrote:
> > > Add a V4L2 sub-device driver for OV02A10 image sensor.
> > > 
> > > Signed-off-by: Dongchun Zhu <dongchun.zhu at mediatek.com>
> > > ---
> > >  MAINTAINERS                 |    1 +
> > >  drivers/media/i2c/Kconfig   |   13 +
> > >  drivers/media/i2c/Makefile  |    1 +
> > >  drivers/media/i2c/ov02a10.c | 1052 +++++++++++++++++++++++++++++++++++++++++++
> > >  4 files changed, 1067 insertions(+)
> > >  create mode 100644 drivers/media/i2c/ov02a10.c
> > 
> > Thank you for the patch. Please see my comments inline.
> > 
> > [snip]
> > > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> > > +				   struct v4l2_subdev_pad_config *cfg)
> > > +{
> > > +	struct v4l2_subdev_format fmt = {
> > > +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE,
> > 
> > As we discussed before, this function is never called with cfg == NULL.
> > Perhaps what we need here is to call ov02a10_set_fmt() twice, once for
> > V4L2_SUBDEV_FORMAT_ACTIVE and then for V4L2_SUBDEV_FORMAT_TRY?
> > 
> > Sakari, would that be a proper implementation of this function?
> 
> It's fine to test fmt, but it should be only done if the driver calls the
> function with ACTIVE format. I.e. it can be removed here, and always use
> TRY.
> 

Sorry for my late coming.
The implementation of this function should be common(similar to
OV2680/OV5645).
If it needs to update to be more proper or clear, as user always sets
format.which to ACTIVE when calling set_fmt, we could only reserve the
TRY format in init_cfg like this:
struct v4l2_subdev_format fmt = {
	which = V4L2_SUBDEV_FORMAT_TRY,

> > 
> > > +		.format = {
> > > +			.width = 1600,
> > > +			.height = 1200,
> > > +		}
> > > +	};
> > > +
> > > +	ov02a10_set_fmt(sd, cfg, &fmt);
> > > +
> > > +	return 0;
> > [snip]
> > 
> > With this and Sakari's comment about the initial state of the reset pin
> > fixed, feel free to add my
> > 
> > Reviewed-by: Tomasz Figa <tfiga at chromium.org>
> > 
> > Best regards,
> > Tomasz
>