[PATCH v4 09/11] dt-bindings: usb: convert mediatek, mtk-xhci.txt to YAML schema
Rob Herring
robh at kernel.org
Mon Dec 21 14:23:29 EST 2020
On Wed, Dec 16, 2020 at 05:30:10PM +0800, Chunfeng Yun wrote:
> Convert mediatek,mtk-xhci.txt to YAML schema mediatek,mtk-xhci.yaml
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
> v4: update it according to Rob's suggestion
> 1. modify dictionary of phys
> 2. fix endentation in "mediatek,syscon-wakeup" items
> 3. remove reference to usb-hcd.yaml
>
> v3:
> 1. fix yamllint warning
> 2. remove pinctrl* properties supported by default suggested by Rob
> 3. drop unused labels
> 4. modify description of mediatek,syscon-wakeup
> 5. remove type of imod-interval-ns
>
> v2: new patch
> ---
> .../bindings/usb/mediatek,mtk-xhci.txt | 121 -------------
> .../bindings/usb/mediatek,mtk-xhci.yaml | 171 ++++++++++++++++++
> 2 files changed, 171 insertions(+), 121 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
> create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
> deleted file mode 100644
> index 42d8814f903a..000000000000
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
> +++ /dev/null
> @@ -1,121 +0,0 @@
> -MT8173 xHCI
> -
> -The device node for Mediatek SOC USB3.0 host controller
> -
> -There are two scenarios: the first one only supports xHCI driver;
> -the second one supports dual-role mode, and the host is based on xHCI
> -driver. Take account of backward compatibility, we divide bindings
> -into two parts.
> -
> -1st: only supports xHCI driver
> -------------------------------------------------------------------------
> -
> -Required properties:
> - - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
> - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
> - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in
> - addition, one of:
> - - "mediatek,mt8173-xhci"
> - - reg : specifies physical base address and size of the registers
> - - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
> - - interrupts : interrupt used by the controller
> - - power-domains : a phandle to USB power domain node to control USB's
> - mtcmos
> - - vusb33-supply : regulator of USB avdd3.3v
> -
> - - clocks : a list of phandle + clock-specifier pairs, one for each
> - entry in clock-names
> - - clock-names : must contain
> - "sys_ck": controller clock used by normal mode,
> - the following ones are optional:
> - "ref_ck": reference clock used by low power mode etc,
> - "mcu_ck": mcu_bus clock for register access,
> - "dma_ck": dma_bus clock for data transfer by DMA,
> - "xhci_ck": controller clock
> -
> - - phys : see usb-hcd.yaml in the current directory
> -
> -Optional properties:
> - - wakeup-source : enable USB remote wakeup;
> - - mediatek,syscon-wakeup : phandle to syscon used to access the register
> - of the USB wakeup glue layer between xHCI and SPM; it depends on
> - "wakeup-source", and has two arguments:
> - - the first one : register base address of the glue layer in syscon;
> - - the second one : hardware version of the glue layer
> - - 1 : used by mt8173 etc
> - - 2 : used by mt2712 etc
> - - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
> - bit1 for u3port1, ... etc;
> - - vbus-supply : reference to the VBUS regulator;
> - - usb3-lpm-capable : supports USB3.0 LPM
> - - pinctrl-names : a pinctrl state named "default" must be defined
> - - pinctrl-0 : pin control group
> - See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> - - imod-interval-ns: default interrupt moderation interval is 5000ns
> -
> -additionally the properties from usb-hcd.yaml (in the current directory) are
> -supported.
> -
> -Example:
> -usb30: usb at 11270000 {
> - compatible = "mediatek,mt8173-xhci";
> - reg = <0 0x11270000 0 0x1000>,
> - <0 0x11280700 0 0x0100>;
> - reg-names = "mac", "ippc";
> - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
> - <&pericfg CLK_PERI_USB0>,
> - <&pericfg CLK_PERI_USB1>;
> - clock-names = "sys_ck", "ref_ck";
> - phys = <&phy_port0 PHY_TYPE_USB3>,
> - <&phy_port1 PHY_TYPE_USB2>;
> - vusb33-supply = <&mt6397_vusb_reg>;
> - vbus-supply = <&usb_p1_vbus>;
> - usb3-lpm-capable;
> - mediatek,syscon-wakeup = <&pericfg 0x400 1>;
> - wakeup-source;
> - imod-interval-ns = <10000>;
> -};
> -
> -2nd: dual-role mode with xHCI driver
> -------------------------------------------------------------------------
> -
> -In the case, xhci is added as subnode to mtu3. An example and the DT binding
> -details of mtu3 can be found in:
> -Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
> -
> -Required properties:
> - - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
> - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
> - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in
> - addition, one of:
> - - "mediatek,mt8173-xhci"
> - - reg : specifies physical base address and size of the registers
> - - reg-names: should be "mac" for xHCI MAC
> - - interrupts : interrupt used by the host controller
> - - power-domains : a phandle to USB power domain node to control USB's
> - mtcmos
> - - vusb33-supply : regulator of USB avdd3.3v
> -
> - - clocks : a list of phandle + clock-specifier pairs, one for each
> - entry in clock-names
> - - clock-names : must contain "sys_ck", and the following ones are optional:
> - "ref_ck", "mcu_ck" and "dma_ck", "xhci_ck"
> -
> -Optional properties:
> - - vbus-supply : reference to the VBUS regulator;
> - - usb3-lpm-capable : supports USB3.0 LPM
> -
> -Example:
> -usb30: usb at 11270000 {
> - compatible = "mediatek,mt8173-xhci";
> - reg = <0 0x11270000 0 0x1000>;
> - reg-names = "mac";
> - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
> - clock-names = "sys_ck", "ref_ck";
> - vusb33-supply = <&mt6397_vusb_reg>;
> - usb3-lpm-capable;
> -};
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> new file mode 100644
> index 000000000000..e5e03f902802
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek USB3 xHCI Device Tree Bindings
> +
> +maintainers:
> + - Chunfeng Yun <chunfeng.yun at mediatek.com>
> +
> +allOf:
> + - $ref: "usb-hcd.yaml"
This will need to reference Serge's xhci.yaml instead.
> +
> +description: |
> + There are two scenarios:
> + case 1: only supports xHCI driver;
> + case 2: supports dual-role mode, and the host is based on xHCI driver.
> +
> +properties:
> + # common properties for both case 1 and case 2
> + compatible:
> + items:
> + - enum:
> + - mediatek,mt2712-xhci
> + - mediatek,mt7622-xhci
> + - mediatek,mt7629-xhci
> + - mediatek,mt8173-xhci
> + - mediatek,mt8183-xhci
> + - const: mediatek,mtk-xhci
> +
> + reg:
> + minItems: 1
> + maxItems: 2
You can drop maxItems, as that is implied by length of 'items'.
> + items:
> + - description: the registers of xHCI MAC
> + - description: the registers of IP Port Control
> +
> + reg-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + - const: mac
> + - const: ippc # optional, only needed for case 1.
> +
> + interrupts:
> + maxItems: 1
> +
> + power-domains:
> + description: A phandle to USB power domain node to control USB's MTCMOS
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 5
> + items:
> + - description: Controller clock used by normal mode
> + - description: Reference clock used by low power mode etc
> + - description: Mcu bus clock for register access
> + - description: DMA bus clock for data transfer
> + - description: controller clock
> +
> + clock-names:
> + minItems: 1
> + maxItems: 5
> + items:
> + - const: sys_ck # required, the following ones are optional
> + - const: ref_ck
> + - const: mcu_ck
> + - const: dma_ck
> + - const: xhci_ck
> +
> + phys:
> + description: List of at most 5 USB2 PHYs and 4 USB3 PHYs on this HCD
If it's less, how does one know what each phy is?
> + minItems: 0
minItems: 0 is never correct. That's phys not being present.
> + maxItems: 9
> +
> + vusb33-supply:
> + description: Regulator of USB AVDD3.3v
> +
> + vbus-supply:
> + description: Regulator of USB VBUS5v
> +
> + usb3-lpm-capable:
> + description: supports USB3.0 LPM
> + type: boolean
> +
> + imod-interval-ns:
> + description:
> + Interrupt moderation interval value, it is 8 times as much as that
> + defined in the xHCI spec on MTK's controller.
> + default: 5000
> +
> + # the following properties are only used for case 1
> + wakeup-source:
> + description: enable USB remote wakeup, see power/wakeup-source.txt
> + type: boolean
> +
> + mediatek,syscon-wakeup:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + maxItems: 1
> + description:
> + A phandle to syscon used to access the register of the USB wakeup glue
> + layer between xHCI and SPM, the field should always be 3 cells long.
> + items:
> + items:
> + - description:
> + The first cell represents a phandle to syscon
> + - description:
> + The second cell represents the register base address of the glue
> + layer in syscon
> + - description:
> + The third cell represents the hardware version of the glue layer,
> + 1 is used by mt8173 etc, 2 is used by mt2712 etc
> + enum: [1, 2]
> +
> + mediatek,u3p-dis-msk:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: The mask to disable u3ports, bit0 for u3port0,
> + bit1 for u3port1, ... etc
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^[a-f]+@[0-9a-f]+$":
[a-f]+ doesn't cover all possible node names. Just '@[0-9a-f]+$', though
I assume you have some max number of ports less than 16?
> + type: object
> + description: The hard wired USB devices.
This needs to reference usb-device.yaml. Or usb-hcd.yaml does and
then this isn't needed. It depends if child nodes of USB host controller
are always USB devices or not. Serge?
> +
> +dependencies:
> + wakeup-source: [ 'mediatek,syscon-wakeup' ]
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/phy/phy.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + usb at 11270000 {
> + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
> + reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
> + reg-names = "mac", "ippc";
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
> + clock-names = "sys_ck", "ref_ck";
> + phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
> + vusb33-supply = <&mt6397_vusb_reg>;
> + vbus-supply = <&usb_p1_vbus>;
> + imod-interval-ns = <10000>;
> + mediatek,syscon-wakeup = <&pericfg 0x400 1>;
> + wakeup-source;
> + usb3-lpm-capable;
> + };
> +...
> --
> 2.18.0
>
More information about the Linux-mediatek
mailing list