[PATCH v2] iommu: Improve the performance for direct_mapping

[Yong Wu]

Currently direct_mapping always use the smallest pgsize which is SZ_4K
normally to mapping. This is unnecessary. we could gather the size, and
call iommu_map then, iommu_map could decide how to map better with the
just right pgsize.

From the original comment, we should take care overlap, otherwise,
iommu_map may return -EEXIST. In this overlap case, we should map the
previous region before overlap firstly. then map the left part.

Each a iommu device will call this direct_mapping when its iommu
initialize, This patch is effective to improve the boot/initialization
time especially while it only needs level 1 mapping.

Signed-off-by: Anan Sun <anan.sun at mediatek.com>
Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
change notes:
v2: Refine the code flow.
v1: https://lore.kernel.org/linux-iommu/20201120090628.6566-1-yong.wu@mediatek.com/
base on v5.10-rc1.
---
 drivers/iommu/iommu.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 8c470f451a32..1a91decb95fa 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -737,6 +737,7 @@ static int iommu_create_device_direct_mappings(struct iommu_group *group,
 	/* We need to consider overlapping regions for different devices */
 	list_for_each_entry(entry, &mappings, list) {
 		dma_addr_t start, end, addr;
+		size_t map_size = 0;
 
 		if (domain->ops->apply_resv_region)
 			domain->ops->apply_resv_region(dev, domain, entry);
@@ -748,16 +749,27 @@ static int iommu_create_device_direct_mappings(struct iommu_group *group,
 		    entry->type != IOMMU_RESV_DIRECT_RELAXABLE)
 			continue;
 
-		for (addr = start; addr < end; addr += pg_size) {
+		for (addr = start; addr <= end; addr += pg_size) {
 			phys_addr_t phys_addr;
 
+			if (addr == end)
+				goto map_end;
+
 			phys_addr = iommu_iova_to_phys(domain, addr);
-			if (phys_addr)
+			if (!phys_addr) {
+				map_size += pg_size;
 				continue;
+			}
 
-			ret = iommu_map(domain, addr, addr, pg_size, entry->prot);
-			if (ret)
-				goto out;
+map_end:
+			if (map_size) {
+				ret = iommu_map(domain, addr - map_size,
+						addr - map_size, map_size,
+						entry->prot);
+				if (ret)
+					goto out;
+				map_size = 0;
+			}
 		}
 
 	}
-- 
2.18.0