[PATCH 0/3] Add LVTS architecture thermal controller

[Michael Kao]

This patch move thermal files related to Mediatek to the mediatek folder.
And introduce the new architecture LVTS (low pressure thermal sensor) driver to report
the highest temperature in the SoC and record the highest temperature sensor,
each sensor as a hot zone.
The LVTS body is divided into two parts, the LVTS controller and the LVTS device.
The LVTS controller can connect up to 4 LVTS devices, and each LVTS device
can connect up to 7 TSMCUs.

The architecture will be the first to be used on mt6873 and mt8192.

Michael Kao (3):
  thermal: mediatek: Relocate driver to mediatek folder
  thermal: mediatek: Add LVTS drivers for SoC theraml zones
  dt-bindings: thermal: Add binding document for mt6873 thermal
    controller

 .../thermal/mediatek-thermal-lvts.yaml        |   80 +
 drivers/thermal/Kconfig                       |   14 +-
 drivers/thermal/Makefile                      |    2 +-
 drivers/thermal/mediatek/Kconfig              |   33 +
 drivers/thermal/mediatek/Makefile             |    2 +
 .../{mtk_thermal.c => mediatek/soc_temp.c}    |    0
 drivers/thermal/mediatek/soc_temp_lvts.c      | 1293 +++++++++++++++++
 drivers/thermal/mediatek/soc_temp_lvts.h      |  312 ++++
 8 files changed, 1725 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
 create mode 100644 drivers/thermal/mediatek/Kconfig
 create mode 100644 drivers/thermal/mediatek/Makefile
 rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.c
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.h

-- 
2.18.0