[PATCH 04/15] usb: misc: ehset: update to use the usb_control_msg_{send|recv}() API

Peter Chen peter.chen at nxp.com
Sun Dec 6 21:25:37 EST 2020


 
> 
> The newer usb_control_msg_{send|recv}() API are an improvement on the
> existing usb_control_msg() as it ensures that a short read/write is treated as
> an error, data can be used off the stack, and raw usb pipes need not be created
> in the calling functions.
> For this reason, instances of usb_control_msg() have been replaced with
> usb_control_msg_{recv|send}() appropriately.
> 
> Signed-off-by: Anant Thazhemadam <anant.thazhemadam at gmail.com>

Reviewed-by: Peter Chen <peter.chen at nxp.com>

Peter

> ---
>  drivers/usb/misc/ehset.c | 70 ++++++++++++++++++----------------------
>  1 file changed, 31 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c index
> 2752e1f4f4d0..068f4fae2965 100644
> --- a/drivers/usb/misc/ehset.c
> +++ b/drivers/usb/misc/ehset.c
> @@ -30,48 +30,42 @@ static int ehset_probe(struct usb_interface *intf,
> 
>  	switch (test_pid) {
>  	case TEST_SE0_NAK_PID:
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_SET_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_TEST,
> -					(USB_TEST_SE0_NAK << 8) | portnum,
> -					NULL, 0, 1000);
> +		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_TEST,
> +					   (USB_TEST_SE0_NAK << 8) | portnum,
> +					   NULL, 0, 1000, GFP_KERNEL);
>  		break;
>  	case TEST_J_PID:
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_SET_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_TEST,
> -					(USB_TEST_J << 8) | portnum,
> -					NULL, 0, 1000);
> +		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_TEST,
> +					   (USB_TEST_J << 8) | portnum, NULL, 0,
> +					   1000, GFP_KERNEL);
>  		break;
>  	case TEST_K_PID:
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_SET_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_TEST,
> -					(USB_TEST_K << 8) | portnum,
> -					NULL, 0, 1000);
> +		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_TEST,
> +					   (USB_TEST_K << 8) | portnum, NULL, 0,
> +					   1000, GFP_KERNEL);
>  		break;
>  	case TEST_PACKET_PID:
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_SET_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_TEST,
> -					(USB_TEST_PACKET << 8) | portnum,
> -					NULL, 0, 1000);
> +		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_TEST,
> +					   (USB_TEST_PACKET << 8) | portnum,
> +					   NULL, 0, 1000, GFP_KERNEL);
>  		break;
>  	case TEST_HS_HOST_PORT_SUSPEND_RESUME:
>  		/* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
>  		msleep(15 * 1000);
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_SET_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_SUSPEND, portnum,
> -					NULL, 0, 1000);
> +		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
> +					   portnum, NULL, 0, 1000, GFP_KERNEL);
>  		if (ret < 0)
>  			break;
> 
>  		msleep(15 * 1000);
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_SUSPEND, portnum,
> -					NULL, 0, 1000);
> +		ret = usb_control_msg_send(hub_udev, 0,
> USB_REQ_CLEAR_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
> +					   portnum, NULL, 0, 1000, GFP_KERNEL);
>  		break;
>  	case TEST_SINGLE_STEP_GET_DEV_DESC:
>  		/* Test: wait for 15secs -> GetDescriptor request */ @@ -80,11
> +74,10 @@ static int ehset_probe(struct usb_interface *intf,
>  		if (!buf)
>  			return -ENOMEM;
> 
> -		ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
> -					USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
> -					USB_DT_DEVICE << 8, 0,
> -					buf, USB_DT_DEVICE_SIZE,
> -					USB_CTRL_GET_TIMEOUT);
> +		ret = usb_control_msg_recv(dev, 0, USB_REQ_GET_DESCRIPTOR,
> +					   USB_DIR_IN, USB_DT_DEVICE << 8, 0,
> +					   buf, USB_DT_DEVICE_SIZE,
> +					   USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
>  		kfree(buf);
>  		break;
>  	case TEST_SINGLE_STEP_SET_FEATURE:
> @@ -100,11 +93,10 @@ static int ehset_probe(struct usb_interface *intf,
>  			break;
>  		}
> 
> -		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> -					USB_REQ_SET_FEATURE, USB_RT_PORT,
> -					USB_PORT_FEAT_TEST,
> -					(6 << 8) | portnum,
> -					NULL, 0, 60 * 1000);
> +		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> +					   USB_RT_PORT, USB_PORT_FEAT_TEST,
> +					   (6 << 8) | portnum, NULL, 0,
> +					   60 * 1000, GFP_KERNEL);
> 
>  		break;
>  	default:
> @@ -112,7 +104,7 @@ static int ehset_probe(struct usb_interface *intf,
>  			__func__, test_pid);
>  	}
> 
> -	return (ret < 0) ? ret : 0;
> +	return ret;
>  }
> 
>  static void ehset_disconnect(struct usb_interface *intf)
> --
> 2.25.1




More information about the Linux-mediatek mailing list