[PATCH v3 1/3] usb typec: mt6360: Add support for mt6360 Type-C driver
ChiYuan Huang
u0084500 at gmail.com
Fri Aug 28 10:33:36 EDT 2020
Chunfeng Yun <chunfeng.yun at mediatek.com> 於 2020年8月28日 週五 下午8:11寫道：
>
> On Thu, 2020-08-27 at 19:18 +0800, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang at richtek.com>
> >
> > Mediatek MT6360 is a multi-functional IC that includes USB Type-C.
> > It works with Type-C Port Controller Manager to provide USB PD
> > and USB Type-C functionalities.
> >
> > v1 to v2
> > 1. Add fix to Prevent the race condition from interrupt and tcpci port
> > unregister during module remove.
> >
> > v2 to v3
> > 1. Change comment style for the head of source code.
> > 2. No need to print error for platform_get_irq_byname.
> > 3. Fix tcpci_register_port check from IS_ERR_OR_NULL to IS_ERR.
> > 4. Rename driver/Kconfig/Makefile form mt6360 to mt636x.
> > 5. Rename DT binding documents from mt6360 to mt636x.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
> > ---
> > drivers/usb/typec/tcpm/Kconfig | 8 ++
> > drivers/usb/typec/tcpm/Makefile | 1 +
> > drivers/usb/typec/tcpm/tcpci_mt6360.c | 212 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 221 insertions(+)
> > create mode 100644 drivers/usb/typec/tcpm/tcpci_mt6360.c
> >
> > diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
> > index fa3f393..58a64e1 100644
> > --- a/drivers/usb/typec/tcpm/Kconfig
> > +++ b/drivers/usb/typec/tcpm/Kconfig
> > @@ -27,6 +27,14 @@ config TYPEC_RT1711H
> > Type-C Port Controller Manager to provide USB PD and USB
> > Type-C functionalities.
> >
> > +config TYPEC_MT6360
> > + tristate "Mediatek MT6360 Type-C driver"
> > + depends on MFD_MT6360
> > + help
> > + Mediatek MT6360 is a multi-functional IC that includes
> > + USB Type-C. It works with Type-C Port Controller Manager
> > + to provide USB PD and USB Type-C functionalities.
> > +
> > endif # TYPEC_TCPCI
> >
> > config TYPEC_FUSB302
> > diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
> > index a5ff6c8..7592ccb 100644
> > --- a/drivers/usb/typec/tcpm/Makefile
> > +++ b/drivers/usb/typec/tcpm/Makefile
> > @@ -5,3 +5,4 @@ obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
> > typec_wcove-y := wcove.o
> > obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
> > obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
> > +obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o
> > diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
> > new file mode 100644
> > index 00000000..f1bd9e0
> > --- /dev/null
> > +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
> > @@ -0,0 +1,212 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2020 MediaTek Inc.
> > + *
> > + * Author: ChiYuan Huang <cy_huang at richtek.com>
> > + */
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/usb/tcpm.h>
> > +
> > +#include "tcpci.h"
> > +
> > +#define MT6360_REG_VCONNCTRL1 0x8C
> > +#define MT6360_REG_MODECTRL2 0x8F
> > +#define MT6360_REG_SWRESET 0xA0
> > +#define MT6360_REG_DEBCTRL1 0xA1
> > +#define MT6360_REG_DRPCTRL1 0xA2
> > +#define MT6360_REG_DRPCTRL2 0xA3
> > +#define MT6360_REG_I2CTORST 0xBF
> > +#define MT6360_REG_RXCTRL2 0xCF
> > +#define MT6360_REG_CTDCTRL2 0xEC
> > +
> > +/* MT6360_REG_VCONNCTRL1 */
> > +#define MT6360_VCONNCL_ENABLE BIT(0)
> > +/* MT6360_REG_RXCTRL2 */
> > +#define MT6360_OPEN40M_ENABLE BIT(7)
> > +/* MT6360_REG_CTDCTRL2 */
> > +#define MT6360_RPONESHOT_ENABLE BIT(6)
> > +
> > +struct mt6360_tcpc_info {
> > + struct tcpci_data tdata;
> > + struct tcpci *tcpci;
> > + struct device *dev;
> > + int irq;
> > +};
> > +
> > +static inline int mt6360_tcpc_read16(struct regmap *regmap,
> > + unsigned int reg, u16 *val)
> > +{
> > + return regmap_raw_read(regmap, reg, val, sizeof(u16));
> > +}
> > +
> > +static inline int mt6360_tcpc_write16(struct regmap *regmap,
> > + unsigned int reg, u16 val)
> > +{
> > + return regmap_raw_write(regmap, reg, &val, sizeof(u16));
> > +}
> > +
> > +static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata)
> > +{
> > + struct regmap *regmap = tdata->regmap;
> > + int ret;
> > +
> > + ret = regmap_write(regmap, MT6360_REG_SWRESET, 0x01);
> > + if (ret)
> > + return ret;
> > +
> > + /* after reset command, wait 1~2ms to wait IC action */
> > + usleep_range(1000, 2000);
> > +
> > + /* write all alert to masked */
> > + ret = mt6360_tcpc_write16(regmap, TCPC_ALERT_MASK, 0);
> Wonder why access some register by 2bytes, and others 4bytes?
> can we access them all by 4bytes?
Actually, the access bus is still I2C.
Each register is still one byte only.
Register address like as TCPC_ALERT_MASK are continuous two byte used
as IRQ MASK.
That's why it's used wirte16 function to access.
Actually, you also can divided into two bytes write into one byte
access by two times.
For I2C bus efficiency, it seems bad.
>
>
> > + if (ret)
> > + return ret;
> > +
> > + /* config I2C timeout reset enable , and timeout to 200ms */
> > + ret = regmap_write(regmap, MT6360_REG_I2CTORST, 0x8F);
> > + if (ret)
> > + return ret;
> > +
> > + /* config CC Detect Debounce : 26.7*val us */
> > + ret = regmap_write(regmap, MT6360_REG_DEBCTRL1, 0x10);
> > + if (ret)
> > + return ret;
> > +
> > + /* DRP Toggle Cycle : 51.2 + 6.4*val ms */
> > + ret = regmap_write(regmap, MT6360_REG_DRPCTRL1, 4);
> > + if (ret)
> > + return ret;
> > +
> > + /* DRP Duyt Ctrl : dcSRC: /1024 */
> > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_DRPCTRL2, 330);
> > + if (ret)
> > + return ret;
> > +
> > + /* Enable VCONN Current Limit function */
> > + ret = regmap_update_bits(regmap, MT6360_REG_VCONNCTRL1, MT6360_VCONNCL_ENABLE,
> > + MT6360_VCONNCL_ENABLE);
> > + if (ret)
> > + return ret;
> > +
> > + /* Enable cc open 40ms when pmic send vsysuv signal */
> > + ret = regmap_update_bits(regmap, MT6360_REG_RXCTRL2, MT6360_OPEN40M_ENABLE,
> > + MT6360_OPEN40M_ENABLE);
> > + if (ret)
> > + return ret;
> > +
> > + /* Enable Rpdet oneshot detection */
> > + ret = regmap_update_bits(regmap, MT6360_REG_CTDCTRL2, MT6360_RPONESHOT_ENABLE,
> > + MT6360_RPONESHOT_ENABLE);
> > + if (ret)
> > + return ret;
> > +
> > + /* Set shipping mode off, AUTOIDLE on */
> > + return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A);
> > +}
> > +
> > +static irqreturn_t mt6360_irq(int irq, void *dev_id)
> > +{
> > + struct mt6360_tcpc_info *mti = dev_id;
> > +
> > + return tcpci_irq(mti->tcpci);
> > +}
> > +
> > +static int mt6360_tcpc_probe(struct platform_device *pdev)
> > +{
> > + struct mt6360_tcpc_info *mti;
> > + int ret;
> > +
> > + mti = devm_kzalloc(&pdev->dev, sizeof(*mti), GFP_KERNEL);
> > + if (!mti)
> > + return -ENOMEM;
> > +
> > + mti->dev = &pdev->dev;
> > +
> > + mti->tdata.regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > + if (!mti->tdata.regmap) {
> > + dev_err(&pdev->dev, "Failed to get parent regmap\n");
> > + return -ENODEV;
> > + }
> > +
> > + mti->irq = platform_get_irq_byname(pdev, "PD_IRQB");
> Use lowercase letters for irq name?
PD_IRQB is defined in MT6360 pinout. The datasheet is also labeled as PD_IRQB.
My thinking is to keep the pinout name like as the datasheet defined.
B means bar to be identified the pin is active low.
>
> > + if (mti->irq < 0)
> > + return mti->irq;
> > +
> > + mti->tdata.init = mt6360_tcpc_init;
> > + mti->tcpci = tcpci_register_port(&pdev->dev, &mti->tdata);
> > + if (IS_ERR(mti->tcpci)) {
> > + dev_err(&pdev->dev, "Failed to register tcpci port\n");
> > + return PTR_ERR(mti->tcpci);
> > + }
> > +
> > + ret = devm_request_threaded_irq(mti->dev, mti->irq, NULL, mt6360_irq, IRQF_ONESHOT,
> > + dev_name(&pdev->dev), mti);
> > + if (ret) {
> > + dev_err(mti->dev, "Failed to register irq\n");
> > + tcpci_unregister_port(mti->tcpci);
> > + return ret;
> > + }
> > +
> > + device_init_wakeup(&pdev->dev, true);
> > + platform_set_drvdata(pdev, mti);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6360_tcpc_remove(struct platform_device *pdev)
> > +{
> > + struct mt6360_tcpc_info *mti = platform_get_drvdata(pdev);
> > +
> > + disable_irq(mti->irq);
> > + tcpci_unregister_port(mti->tcpci);
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused mt6360_tcpc_suspend(struct device *dev)
> > +{
> > + struct mt6360_tcpc_info *mti = dev_get_drvdata(dev);
> > +
> > + if (device_may_wakeup(dev))
> > + enable_irq_wake(mti->irq);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused mt6360_tcpc_resume(struct device *dev)
> > +{
> > + struct mt6360_tcpc_info *mti = dev_get_drvdata(dev);
> > +
> > + if (device_may_wakeup(dev))
> > + disable_irq_wake(mti->irq);
> > +
> > + return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(mt6360_tcpc_pm_ops, mt6360_tcpc_suspend, mt6360_tcpc_resume);
> > +
> > +static const struct of_device_id __maybe_unused mt6360_tcpc_of_id[] = {
> > + { .compatible = "mediatek,mt6360-tcpc", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6360_tcpc_of_id);
> > +
> > +static struct platform_driver mt6360_tcpc_driver = {
> > + .driver = {
> > + .name = "mt6360-tcpc",
> > + .pm = &mt6360_tcpc_pm_ops,
> > + .of_match_table = mt6360_tcpc_of_id,
> > + },
> > + .probe = mt6360_tcpc_probe,
> > + .remove = mt6360_tcpc_remove,
> > +};
> > +module_platform_driver(mt6360_tcpc_driver);
> > +
> > +MODULE_AUTHOR("ChiYuan Huang <cy_huang at richtek.com>");
> > +MODULE_DESCRIPTION("MT6360 USB Type-C Port Controller Interface Driver");
> > +MODULE_LICENSE("GPL v2");
>
More information about the Linux-mediatek
mailing list