[PATCH net v2] net: dsa: mt7530: fix advertising unsupported 1000baseT_Half

[Landen Chao]

Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.

Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Landen Chao <landen.chao at mediatek.com>
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
---
v1->v2
  - fix the commit subject spilled into the commit message
---
 drivers/net/dsa/mt7530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8dcb8a49ab67..238417db26f9 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1501,7 +1501,7 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
 		phylink_set(mask, 100baseT_Full);
 
 		if (state->interface != PHY_INTERFACE_MODE_MII) {
-			phylink_set(mask, 1000baseT_Half);
+			/* This switch only supports 1G full-duplex. */
 			phylink_set(mask, 1000baseT_Full);
 			if (port == 5)
 				phylink_set(mask, 1000baseX_Full);
-- 
2.17.1