[PATCH v1 05/21] mtk-mmsys: add ovl mout on support

Chun-Kuang Hu chunkuang.hu at kernel.org
Thu Aug 20 19:36:38 EDT 2020


Hi, Yongqiang:

Yongqiang Niu <yongqiang.niu at mediatek.com> 於 2020年8月20日 週四 下午2:16寫道:
>
> add ovl mout on support
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>  drivers/soc/mediatek/mmsys/mt8192-mmsys.c | 23 +++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-mmsys.c          |  8 ++++++++
>  include/linux/soc/mediatek/mtk-mmsys.h    |  3 +++
>  3 files changed, 34 insertions(+)
>
> diff --git a/drivers/soc/mediatek/mmsys/mt8192-mmsys.c b/drivers/soc/mediatek/mmsys/mt8192-mmsys.c
> index 006d41d..06080ad 100644
> --- a/drivers/soc/mediatek/mmsys/mt8192-mmsys.c
> +++ b/drivers/soc/mediatek/mmsys/mt8192-mmsys.c
> @@ -134,10 +134,33 @@ static void mtk_mmsys_ddp_sout_sel(void __iomem *config_regs,
>         }
>  }
>
> +static int mtk_mmsys_ovl_mout_en(enum mtk_ddp_comp_id cur,
> +                                enum mtk_ddp_comp_id next,
> +                                unsigned int *addr)
> +{
> +       int value = -1;
> +
> +       *addr = MT8192_MMSYS_OVL_MOUT_EN;
> +
> +       if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_OVL_2L0)
> +               value = DISP_OVL0_GO_BG;
> +       else if (cur == DDP_COMPONENT_OVL_2L0 && next == DDP_COMPONENT_OVL0)
> +               value = DISP_OVL0_2L_GO_BG;
> +       else if (cur == DDP_COMPONENT_OVL0)
> +               value = DISP_OVL0_GO_BLEND;
> +       else if (cur == DDP_COMPONENT_OVL_2L0)
> +               value = DISP_OVL0_2L_GO_BLEND;
> +       else
> +               value = -1;
> +
> +       return value;
> +}
> +
>  static struct mtk_mmsys_conn_funcs mmsys_funcs = {
>         .mout_en = mtk_mmsys_ddp_mout_en,
>         .sel_in = mtk_mmsys_ddp_sel_in,
>         .sout_sel = mtk_mmsys_ddp_sout_sel,
> +       .ovl_mout_en = mtk_mmsys_ovl_mout_en,
>  };
>
>  static int mmsys_probe(struct platform_device *pdev)
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index 828d59e..1362d01 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -76,6 +76,14 @@ void mtk_mmsys_ddp_connect(struct device *dev,
>                 reg = readl_relaxed(config_regs + addr) | value;
>                 writel_relaxed(reg, config_regs + addr);
>         }
> +
> +       if (priv_funcs->ovl_mout_en) {
> +               value = priv_funcs->ovl_mout_en(cur, next, &addr);
> +               if (value >= 0) {
> +                       reg = readl_relaxed(config_regs + addr) | value;
> +                       writel_relaxed(reg, config_regs + addr);
> +               }
> +       }

I would like to do routing control like [1].

[1] https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/2345186

Regards,
Chun-Kuang.

>  }
>  EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
>
> diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
> index 8ef3eaa..eefc7b1 100644
> --- a/include/linux/soc/mediatek/mtk-mmsys.h
> +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> @@ -55,6 +55,9 @@ struct mtk_mmsys_conn_funcs {
>         void (*sout_sel)(void __iomem *config_regs,
>                          enum mtk_ddp_comp_id cur,
>                          enum mtk_ddp_comp_id next);
> +       int (*ovl_mout_en)(enum mtk_ddp_comp_id cur,
> +                          enum mtk_ddp_comp_id next,
> +                          unsigned int *addr);
>  };
>
>  void mtk_mmsys_register_conn_funcs(struct device *dev,
> --
> 1.8.1.1.dirty
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek



More information about the Linux-mediatek mailing list