[PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes

[Rob Herring]

On Tue, Aug 4, 2020 at 11:19 AM Frank Wunderlich
<frank-w at public-files.de> wrote:
>
> CC Rob Herring and devicetree-list

Resend or it is not in my patchwork queue.

But this is simple enough:

Acked-by: Rob Herring <robh at kernel.org>

>
> > Gesendet: Dienstag, 04. August 2020 um 18:55 Uhr
> > Von: "Frank Wunderlich" <linux at fw-web.de>
> > An: linux-mediatek at lists.infradead.org
> > Cc: "Frank Wunderlich" <frank-w at public-files.de>, "Chun-Kuang Hu" <chunkuang.hu at kernel.org>, "Philipp Zabel" <p.zabel at pengutronix.de>, "David Airlie" <airlied at linux.ie>, "Daniel Vetter" <daniel at ffwll.ch>, "Matthias Brugger" <matthias.bgg at gmail.com>, dri-devel at lists.freedesktop.org, linux-arm-kernel at lists.infradead.org, linux-kernel at vger.kernel.org
> > Betreff: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
> >
> > From: Frank Wunderlich <frank-w at public-files.de>
> >
> > mt7623 uses mt2701/mt8173 for drm, but have own compatibles
> >
> > Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> > ---
> >  .../devicetree/bindings/display/mediatek/mediatek,disp.txt    | 2 +-
> >  .../devicetree/bindings/display/mediatek/mediatek,dpi.txt     | 2 +-
> >  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt     | 4 ++--
> >  .../devicetree/bindings/display/mediatek/mediatek,hdmi.txt    | 4 ++++
> >  4 files changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > index b91e709db7a4..121220745d46 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > @@ -43,7 +43,7 @@ Required properties (all function blocks):
> >       "mediatek,<chip>-dpi"                   - DPI controller, see mediatek,dpi.txt
> >       "mediatek,<chip>-disp-mutex"            - display mutex
> >       "mediatek,<chip>-disp-od"               - overdrive
> > -  the supported chips are mt2701, mt2712 and mt8173.
> > +  the supported chips are mt2701, mt7623, mt2712 and mt8173.
> >  - reg: Physical base address and length of the function block register space
> >  - interrupts: The interrupt signal from the function block (required, except for
> >    merge and split function blocks).
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> > index 77def4456706..dc1ebd13cc88 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> > @@ -7,7 +7,7 @@ output bus.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-dpi"
> > -  the supported chips are mt2701 , mt8173 and mt8183.
> > +  the supported chips are mt2701, mt7623, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > index 8e4729de8c85..f06f24d405a5 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > @@ -7,7 +7,7 @@ channel output.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-dsi"
> > -  the supported chips are mt2701, mt8173 and mt8183.
> > +- the supported chips are mt2701, mt7623, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-mipi-tx"
> > -  the supported chips are mt2701, mt8173 and mt8183.
> > +- the supported chips are mt2701, 7623, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - clocks: PLL reference clock
> >  - clock-output-names: name of the output clock line to the DSI encoder
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> > index 7b124242b0c5..6b1c586403e4 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> > @@ -6,6 +6,7 @@ its parallel input.
> >
> >  Required properties:
> >  - compatible: Should be "mediatek,<chip>-hdmi".
> > +- the supported chips are mt2701, mt7623 and mt8173
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > @@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
> >
> >  Required properties:
> >  - compatible: Should be "mediatek,<chip>-cec"
> > +- the supported chips are mt7623 and mt8173
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clock
> > @@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
> >
> >  Required properties:
> >  - compatible: Should be "mediatek,<chip>-hdmi-ddc"
> > +- the supported chips are mt7623 and mt8173
> >  - reg: Physical base address and length of the controller's registers
> >  - clocks: device clock
> >  - clock-names: Should be "ddc-i2c".
> > @@ -56,6 +59,7 @@ output and drives the HDMI pads.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-hdmi-phy"
> > +- the supported chips are mt2701, mt7623 and mt8173
> >  - reg: Physical base address and length of the module's registers
> >  - clocks: PLL reference clock
> >  - clock-names: must contain "pll_ref"
> > --
> > 2.25.1
> >
> >