[PATCH v4] scsi: ufs: Cleanup completed request without interrupt notification

Can Guo cang at codeaurora.org
Mon Aug 3 01:14:02 EDT 2020


Hi Stanley,

On 2020-08-03 11:00, Stanley Chu wrote:
> Hi Can,
> 
> On Sat, 2020-08-01 at 07:17 +0800, Can Guo wrote:
>> Hi Bart,
>> 
>> On 2020-08-01 00:51, Bart Van Assche wrote:
>> > On 2020-07-31 01:00, Can Guo wrote:
>> >> AFAIK, sychronization of scsi_done is not a problem here, because scsi
>> >> layer
>> >> use the atomic state, namely SCMD_STATE_COMPLETE, of a scsi cmd to
>> >> prevent
>> >> the concurrency of abort and real completion of it.
>> >>
>> >> Check func scsi_times_out(), hope it helps.
>> >>
>> >> enum blk_eh_timer_return scsi_times_out(struct request *req)
>> >> {
>> >> ...
>> >>         if (rtn == BLK_EH_DONE) {
>> >>                 /*
>> >>                  * Set the command to complete first in order to
>> >> prevent
>> >> a real
>> >>                  * completion from releasing the command while error
>> >> handling
>> >>                  * is using it. If the command was already completed,
>> >> then the
>> >>                  * lower level driver beat the timeout handler, and it
>> >> is safe
>> >>                  * to return without escalating error recovery.
>> >>                  *
>> >>                  * If timeout handling lost the race to a real
>> >> completion, the
>> >>                  * block layer may ignore that due to a fake timeout
>> >> injection,
>> >>                  * so return RESET_TIMER to allow error handling
>> >> another
>> >> shot
>> >>                  * at this command.
>> >>                  */
>> >>                 if (test_and_set_bit(SCMD_STATE_COMPLETE,
>> >> &scmd->state))
>> >>                         return BLK_EH_RESET_TIMER;
>> >>                 if (scsi_abort_command(scmd) != SUCCESS) {
>> >>                         set_host_byte(scmd, DID_TIME_OUT);
>> >>                         scsi_eh_scmd_add(scmd);
>> >>                 }
>> >>         }
>> >> }
>> >
>> > I am familiar with this mechanism. My concern is that both the regular
>> > completion path and the abort handler must call scsi_dma_unmap() before
>> > calling cmd->scsi_done(cmd). I don't see how
>> > test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state) could prevent that
>> > the regular completion path and the abort handler call scsi_dma_unmap()
>> > concurrently since both calls happen before the SCMD_STATE_COMPLETE bit
>> > is set?
>> >
>> > Thanks,
>> >
>> > Bart.
>> 
>> For scsi_dma_unmap() part, that is true - we should make it serialized
>> with
>> any other completion paths. I've found it during my fault injection
>> test, so
>> I've made a patch to fix it, but it only comes in my next error 
>> recovery
>> enhancement patch series. Please check the attachment.
>> 
> 
> Your patch looks good to me.
> 
> I have the same idea before but I found that calling scsi_done() (by
> __ufshcd_transfer_req_compl()) in ufshcd_abort() in old kernel (e.g.,
> 4.14) will cause issues but it has been resolved by introduced
> SCMD_STATE_COMPLETE flag in newer kernel. So your patch makes sense.
> 
> Would you mind sending out this draft patch as a formal patch together
> with my patch to fix issues in ufshcd_abort()? Our patches are aimed to
> fix cases that host/device reset eventually not being triggered by the
> result of ufshcd_abort(), for example, command is aborted successfully
> or command is not pending in device with its doorbell also cleared.
> 
> Thanks,
> Stanley Chu
> 

I don't quite actually follow your fix here and I didn't test the 
similar
fault injection scenario like you do here, so I am not sure if I should
just absorb your fix into mine. How about I put my fix in my current 
error
recovery patch series (maybe in next version of it) and you can give 
your
review. So you can still go with your fix as it is. Mine will be picked 
up
later by Martin. What do you think?

Thanks,

Can Guo.

>> Thanks,
>> 
>> Can Guo.
>> 



More information about the Linux-mediatek mailing list