[PATCH v9 06/12] soc: mediatek: cmdq: clear the event in cmdq initial flow

Bibby Hsieh bibby.hsieh at mediatek.com
Wed Jun 26 23:19:52 PDT 2019


GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.

In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.

Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
Reviewed-by: CK Hu <ck.hu at mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
 include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
 include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 69daaadc3a5f..9a6ce9f5a7db 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -21,6 +21,7 @@
 #define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
 
 #define CMDQ_CURR_IRQ_STATUS		0x10
+#define CMDQ_SYNC_TOKEN_UPDATE		0x68
 #define CMDQ_THR_SLOT_CYCLES		0x30
 #define CMDQ_THR_BASE			0x100
 #define CMDQ_THR_SIZE			0x80
@@ -104,8 +105,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
 
 static void cmdq_init(struct cmdq *cmdq)
 {
+	int i;
+
 	WARN_ON(clk_enable(cmdq->clock) < 0);
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
 	clk_disable(cmdq->clock);
 }
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb73422c2fa..911475da7a53 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT			0x3ff
 
 /*
  * CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13a9b15..4e8899972db4 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
 
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT				0x3ff
-
 struct cmdq_pkt;
 
 struct cmdq_client {
-- 
2.18.0




More information about the Linux-mediatek mailing list