[PATCH v5 09/14] soc: mediatek: Add basic_clk_name to scp_power_data

Weiyi Lu weiyi.lu at mediatek.com
Wed Jun 19 02:36:11 PDT 2019


On Thu, 2019-03-21 at 14:02 +0800, Nicolas Boichat wrote:
> On Tue, Mar 19, 2019 at 4:02 PM Weiyi Lu <weiyi.lu at mediatek.com> wrote:
> >
> > Try to stop extending the clk_id or clk_names if there are
> > more and more new BASIC clocks. To get its own clocks by the
> > basic_clk_name of each power domain.
> >
> > Signed-off-by: Weiyi Lu <weiyi.lu at mediatek.com>
> > ---
> >  drivers/soc/mediatek/mtk-scpsys.c | 27 +++++++++++++++++++--------
> >  1 file changed, 19 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index 6bf846cb1893..c6360de4e41e 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -118,6 +118,8 @@ static const char * const clk_names[] = {
> >   * @bus_prot_mask: The mask for single step bus protection.
> >   * @clk_id: The basic clock needs to be enabled before enabling certain
> >   *          power domains.
> > + * @basic_clk_name: provide the same purpose with field "clk_id"
> > + *                  by declaring basic clock prefix name rather than clk_id.
> >   * @caps: The flag for active wake-up action.
> >   */
> >  struct scp_domain_data {
> > @@ -128,6 +130,7 @@ struct scp_domain_data {
> >         u32 sram_pdn_ack_bits;
> >         u32 bus_prot_mask;
> >         enum clk_id clk_id[MAX_CLKS];
> > +       const char *basic_clk_name[MAX_CLKS];
> 
> Either call them basic_clk_id/basic_clk_name, or clk_id/clk_name.
> 

OK.

> >         u8 caps;
> >  };
> >
> > @@ -499,16 +502,24 @@ static struct scp *init_scp(struct platform_device *pdev,
> >
> >                 scpd->data = data;
> >
> > -               for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
> > -                       struct clk *c = clk[data->clk_id[j]];
> > +               if (data->clk_id[0]) {
> 
> Since it's either clk_id or basic_clk_name, I wonder if it'd be good
> to add a WARN_ON here, e.g.
> 
> WARN_ON(data->basic_clk_name[0]);
> 

Thanks for the advise. I'll add it.

> > +                       for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
> > +                               struct clk *c = clk[data->clk_id[j]];
> >
> > -                       if (IS_ERR(c)) {
> > -                               dev_err(&pdev->dev, "%s: clk unavailable\n",
> > -                                       data->name);
> > -                               return ERR_CAST(c);
> > -                       }
> > +                               if (IS_ERR(c)) {
> > +                                       dev_err(&pdev->dev,
> > +                                               "%s: clk unavailable\n",
> > +                                               data->name);
> > +                                       return ERR_CAST(c);
> > +                               }
> >
> > -                       scpd->clk[j] = c;
> > +                               scpd->clk[j] = c;
> > +                       }
> > +               } else if (data->basic_clk_name[0]) {
> > +                       for (j = 0; j < MAX_CLKS &&
> > +                                       data->basic_clk_name[j]; j++)
> > +                               scpd->clk[j] = devm_clk_get(&pdev->dev,
> > +                                               data->basic_clk_name[j]);
> >                 }
> >
> >                 genpd->name = data->name;
> > --
> > 2.18.0
> >





More information about the Linux-mediatek mailing list