[PATCH v7 09/21] iommu/mediatek: Refine protect memory definition

Matthias Brugger matthias.bgg at gmail.com
Mon Jun 17 02:59:22 PDT 2019



On 10/06/2019 14:17, Yong Wu wrote:
> The protect memory setting is a little different in the different SoCs.
> In the register REG_MMU_CTRL_REG(0x110), the TF_PROT(translation fault
> protect) shift bit is normally 4 while it shift 5 bits only in the
> mt8173. This patch delete the complex MACRO and use a common if-else
> instead.
> 
> Signed-off-by: Yong Wu <yong.wu at mediatek.com>
> Reviewed-by: Evan Green <evgreen at chromium.org>

Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index ad838b9..d38dfa2 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -52,12 +52,9 @@
>  #define REG_MMU_DCM_DIS				0x050
>  
>  #define REG_MMU_CTRL_REG			0x110
> +#define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
>  #define F_MMU_PREFETCH_RT_REPLACE_MOD		BIT(4)
> -#define F_MMU_TF_PROTECT_SEL_SHIFT(data) \
> -	((data)->plat_data->m4u_plat == M4U_MT2712 ? 4 : 5)
> -/* It's named by F_MMU_TF_PROT_SEL in mt2712. */
> -#define F_MMU_TF_PROTECT_SEL(prot, data) \
> -	(((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))
> +#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173	(2 << 5)
>  
>  #define REG_MMU_IVRP_PADDR			0x114
>  
> @@ -519,9 +516,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  		return ret;
>  	}
>  
> -	regval = F_MMU_TF_PROTECT_SEL(2, data);
>  	if (data->plat_data->m4u_plat == M4U_MT8173)
> -		regval |= F_MMU_PREFETCH_RT_REPLACE_MOD;
> +		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
> +			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
> +	else
> +		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
>  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
>  
>  	regval = F_L2_MULIT_HIT_EN |
> 



More information about the Linux-mediatek mailing list