[PATCH 1/2] mmc: mediatek: fix SDIO IRQ interrupt handle flow

jjian zhou jjian.zhou at mediatek.com
Sun Jun 16 22:57:00 PDT 2019


On Fri, 2019-06-14 at 17:46 +0800, Ulf Hansson wrote:
> On Fri, 14 Jun 2019 at 07:26, Jjian Zhou <jjian.zhou at mediatek.com> wrote:
> >
> > From: jjian zhou <jjian.zhou at mediatek.com>
> >
> > SDIO IRQ is triggered by low level. It need disable SDIO IRQ
> > detected function. Otherwise the interrupt register can't be cleared.
> > It will process the interrupt more.
> >
> > Signed-off-by: Jjian Zhou <jjian.zhou at mediatek.com>
> > Signed-off-by: Chaotian Jing <chaotian.jing at mediatek.com>
> > Signed-off-by: Yong Mao <yong.mao at mediatek.com>
> > ---
> >  drivers/mmc/host/mtk-sd.c | 13 +++++++------
> >  1 file changed, 7 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > index c518cc2..29992ae 100644
> > --- a/drivers/mmc/host/mtk-sd.c
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -1389,10 +1389,12 @@ static void __msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> >         struct msdc_host *host = mmc_priv(mmc);
> >
> >         spin_lock_irqsave(&host->lock, flags);
> > -       if (enb)
> > +       if (enb) {
> >                 sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> > -       else
> > +               sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > +       } else {
> >                 sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> 
> Rather than clearing SDC_CFG_SDIOIDE in the irq handler, you need to
> do it here. As otherwise when the mmc core calls
> host->ops->enable_sdio_irq() to disable the SDIO IRQ, it may stay
> enabled.
> 

Thank you for your review.

I remove the spin lock in "__msdc_enable_sdio_irq" and add 
spin lock in "msdc_enable_sdio_irq". The modification of
"__msdc_enable_sdio_irq" and "msdc_enable_sdio_irq" is as following.

static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb)
{
	if (enb) {
		sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
		sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
	} else {
		sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
	}
}

static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
{
	unsigned long flags;
	struct msdc_host *host = mmc_priv(mmc);
	spin_lock_irqsave(&host->lock, flags);;
	__msdc_enable_sdio_irq(host, enb);
	spin_unlock_irqrestore(&host->lock, flags);

	if (enb)
		pm_runtime_get_noresume(host->dev);
	else
		pm_runtime_get_noidle(host->dev);
}

> > +       }
> >         spin_unlock_irqrestore(&host->lock, flags);
> >  }
> >
> > @@ -1422,6 +1424,8 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> >                 spin_lock_irqsave(&host->lock, flags);
> >                 events = readl(host->base + MSDC_INT);
> >                 event_mask = readl(host->base + MSDC_INTEN);
> > +               if ((events & event_mask) & MSDC_INT_SDIOIRQ)
> > +                       sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> 
> As stated above, I suggest you move this into __msdc_enable_sdio_irq()
> and thus call that function from here instead. Well, that doesn't work
> as is, because of the spin lock, so you rather need to make a
> sub-function of __msdc_enable_sdio_irq, that don't take/releases the
> lock.
> 
> I hope that was clear. If not, I can post a patch to show you what I mean.
> 

I also modify this part handler in msdc_irq.

	spin_lock_irqsave(&host->lock, flags);
	events = readl(host->base + MSDC_INT);
	event_mask = readl(host->base + MSDC_INTEN);
	if ((events & event_mask) & MSDC_INT_SDIOIRQ)
		__msdc_enable_sdio_irq(host, 0);
	/* clear interrupts */
	writel(events & event_mask, host->base + MSDC_INT);

	mrq = host->mrq;
	cmd = host->cmd;
	data = host->data;
	spin_unlock_irqrestore(&host->lock, flags);

	if ((events & event_mask) & MSDC_INT_SDIOIRQ)
		sdio_signal_irq(host->mmc);

I also will add spin lock in the "msdc_ack_sdio_irq".

Looking forward to your suggestions.
> 
> >                 /* clear interrupts */
> >                 writel(events & event_mask, host->base + MSDC_INT);
> >
> > @@ -1572,10 +1576,7 @@ static void msdc_init_hw(struct msdc_host *host)
> >         sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
> >
> >         /* Config SDIO device detect interrupt function */
> > -       if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > -               sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > -       else
> > -               sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > +       sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> >
> >         /* Configure to default data timeout */
> >         sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
> > --
> > 1.9.1
> >
> 
> Kind regards
> Uffe





More information about the Linux-mediatek mailing list