[PATCH] mtu3: fix setup packet response for HNP and SRP request

Macpaul Lin macpaul.lin at mediatek.com
Tue Jun 11 23:28:07 PDT 2019


1. Add OTG_HNP_REQD and OTG_SRP_REQD definitions in ch9.h.
2. When OTG_HNP_REQD and OTG_SRP_REQD has been received,
usb hardware must not enter TEST mode but need to response setup packet.
3. Add otg_srp_reqd and otg_hnp_reqd in struct ssusb_mtk for futher
implementation.

Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
 drivers/usb/mtu3/mtu3.h            |  4 ++++
 drivers/usb/mtu3/mtu3_gadget_ep0.c | 13 +++++++++++++
 include/uapi/linux/usb/ch9.h       |  5 +++++
 3 files changed, 22 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 76ecf12fdf62..bb8a31bc6e4d 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -226,6 +226,8 @@ struct otg_switch_mtk {
  * @dma_clk: dma_bus_ck clock for AXI bus etc
  * @dr_mode: works in which mode:
  *		host only, device only or dual-role mode
+ * @otg_srp_reqd: used for SRP request handling.
+ * @otg_hnp_reqd: used for HNP request handling.
  * @u2_ports: number of usb2.0 host ports
  * @u3_ports: number of usb3.0 host ports
  * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
@@ -252,6 +254,8 @@ struct ssusb_mtk {
 	/* otg */
 	struct otg_switch_mtk otg_switch;
 	enum usb_dr_mode dr_mode;
+	bool otg_srp_reqd;
+	bool otg_hnp_reqd;
 	bool is_host;
 	int u2_ports;
 	int u3_ports;
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 4da216c99726..1247c43a63e6 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -285,11 +285,24 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
 		dev_dbg(mtu->dev, "TEST_PACKET\n");
 		mtu->test_mode_nr = TEST_PACKET_MODE;
 		break;
+	case OTG_SRP_REQD:
+		dev_dbg(mtu->dev, "OTG_SRP_REQD\n");
+		mtu->ssusb->otg_srp_reqd = 1;
+		break;
+	case OTG_HNP_REQD:
+		dev_dbg(mtu->dev, "OTG_HNP_REQD\n");
+		mtu->ssusb->otg_hnp_reqd = 1;
+		break;
 	default:
 		handled = -EINVAL;
 		goto out;
 	}
 
+	if (mtu->ssusb->otg_srp_reqd || mtu->ssusb->otg_hnp_reqd) {
+		mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+		goto out;
+	}
+
 	mtu->test_mode = true;
 
 	/* no TX completion interrupt, and need restart platform after test */
diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h
index d5a5caec8fbc..545918c83fd1 100644
--- a/include/uapi/linux/usb/ch9.h
+++ b/include/uapi/linux/usb/ch9.h
@@ -143,6 +143,11 @@
 #define	TEST_SE0_NAK	3
 #define	TEST_PACKET	4
 #define	TEST_FORCE_EN	5
+/*
+ * OTG HNP and SRP REQD
+ */
+#define	OTG_SRP_REQD	6
+#define	OTG_HNP_REQD	7
 
 /* Status Type */
 #define USB_STATUS_TYPE_STANDARD	0
-- 
2.18.0




More information about the Linux-mediatek mailing list