[PATCH 02/11] dt-bindings: phy-mtk-tphy: make the ref clock optional

Rob Herring robh at kernel.org
Thu Aug 29 12:25:50 PDT 2019


On Fri, Aug 23, 2019 at 03:00:09PM +0800, Chunfeng Yun wrote:
> Make the ref clock optional, then we no need refer to a fixed-clock
> in DTS anymore when the clock of USB3 PHY comes from oscillator
> directly
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
>  .../devicetree/bindings/phy/phy-mtk-tphy.txt        | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> index d5b327f85fa2..1c18bf10b2fe 100644
> --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> @@ -34,12 +34,6 @@ Optional properties (controller (parent) node):
>  
>  Required properties (port (child) node):
>  - reg		: address and length of the register set for the port.
> -- clocks	: a list of phandle + clock-specifier pairs, one for each
> -		  entry in clock-names
> -- clock-names	: must contain
> -		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
> -			reference clock for SuperSpeed analog phy, sometimes is
> -			24M, 25M or 27M, depended on platform.
>  - #phy-cells	: should be 1 (See second example)
>  		  cell after port phandle is phy type from:
>  			- PHY_TYPE_USB2
> @@ -48,6 +42,13 @@ Required properties (port (child) node):
>  			- PHY_TYPE_SATA
>  
>  Optional properties (PHY_TYPE_USB2 port (child) node):
> +- clocks	: a list of phandle + clock-specifier pairs, one for each
> +		  entry in clock-names
> +- clock-names	: may contain
> +		  "ref": 48M reference clock for HighSpeed anolog phy; and 26M
> +			reference clock for SuperSpeed anolog phy, sometimes is
> +			24M, 25M or 27M, depended on platform.

How do you know the frequency when it is not present?

> +
>  - mediatek,eye-src	: u32, the value of slew rate calibrate
>  - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
>  - mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
> -- 
> 2.23.0
> 



More information about the Linux-mediatek mailing list