[RFC PATCH V3 2/4] media: platform: Add Mediatek sensor interface driver KConfig
sakari.ailus at iki.fi
Mon Aug 26 04:53:09 PDT 2019
On Thu, Jun 06, 2019 at 06:00:31PM +0800, Louis Kuo wrote:
> This patch adds KConfig for sensor interface driver. Sensor interface
> is a MIPI-CSI2 host driver, namely, a HW camera interface controller.
> It support a widely adopted, simple, high-speed protocol primarily
> for point-to-point image and video transmission between cameras and host
> Signed-off-by: Louis Kuo <louis.kuo at mediatek.com>
> drivers/media/platform/mtk-isp/Kconfig | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 drivers/media/platform/mtk-isp/Kconfig
> diff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig
> new file mode 100644
> index 0000000..bc7fd01
> --- /dev/null
> +++ b/drivers/media/platform/mtk-isp/Kconfig
> @@ -0,0 +1,17 @@
> +config MTK_SENINF
> + bool "Mediatek mipi csi2 driver"
> + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + depends on MEDIA_CAMERA_SUPPORT
> + select V4L2_FWNODE
> + default n
> + help
> + This driver provides a mipi-csi2 host driver used as a
> + interface to connect camera with Mediatek's
> + MT8183 SOCs. It is able to handle multiple cameras
> + at the same time.
> + Choose y if you want to use Mediatek SoCs to create image
> + capture application such as video recording and still image
> + capture.
Rather than being a separate patch, this should go in with the driver.
The DT bindings should precede the driver, and you'll need a MAINTAINERS
entry for the driver, too.
More information about the Linux-mediatek