[PATCH v2 1/4] bindings: rtc: add bindings for MT2712 RTC

Matthias Brugger matthias.bgg at gmail.com
Thu Aug 22 02:17:53 PDT 2019



On 01/08/2019 13:01, Ran Bi wrote:
> Document the binding for MT2712 RTC implemented by rtc-mt2712.
> 
> Signed-off-by: Ran Bi <ran.bi at mediatek.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---
>  .../devicetree/bindings/rtc/rtc-mt2712.txt         | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
> new file mode 100644
> index 000000000000..c33d87e5e753
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
> @@ -0,0 +1,14 @@
> +Device-Tree bindings for MediaTek SoC based RTC
> +
> +Required properties:
> +- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
> +- reg 		    : Specifies base physical address and size of the registers;
> +- interrupts	    : Should contain the interrupt for RTC alarm;

No clocks for the RTC? What about CLK_TOP_RTC_SEL from the clk driver?

Regards,
Matthias

> +
> +Example:
> +
> +rtc: rtc at 10011000 {
> +	compatible = "mediatek,mt2712-rtc";
> +	reg = <0 0x10011000 0 0x1000>;
> +	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
> +};
> 



More information about the Linux-mediatek mailing list