[PATCH v2 11/11] arm64: dts: add dts nodes for MT6779

Marc Zyngier maz at kernel.org
Mon Aug 19 05:07:00 PDT 2019


Hi Mars,

On 19/08/2019 12:42, Mars Cheng wrote:
> Hi Marc
> 
> On Mon, 2019-08-19 at 10:40 +0100, Marc Zyngier wrote:
>> On 19/08/2019 10:21, Mars Cheng wrote:
>>> this adds initial MT6779 dts settings fo board support,
>>> including cpu, gic, timer, ccf, pinctrl, uart...etc.
>>>
>>> Signed-off-by: Mars Cheng <mars.cheng at mediatek.com>
>>> ---
>>>  arch/arm64/boot/dts/mediatek/Makefile        |    1 +
>>>  arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi |   31 ++++
>>>  arch/arm64/boot/dts/mediatek/mt6779.dts      |  229 ++++++++++++++++++++++++++
>>>  3 files changed, 261 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>>> index 458bbc4..53f1c61 100644
>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>>> @@ -1,6 +1,7 @@
>>>  # SPDX-License-Identifier: GPL-2.0
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi b/arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi
>>> new file mode 100644
>>> index 0000000..164f5cb
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi
>>> @@ -0,0 +1,31 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (c) 2019 MediaTek Inc.
>>> + * Author: Mars.C <mars.cheng at mediatek.com>
>>> + *
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "mt6779.dtsi"
>>> +
>>> +/ {
>>> +	model = "MediaTek MT6779 EVB";
>>> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
>>> +
>>> +	aliases {
>>> +		serial0 = &uart0;
>>> +	};
>>> +
>>> +	memory at 40000000 {
>>> +		device_type = "memory";
>>> +		reg = <0 0x40000000 0 0x1e800000>;
>>> +	};
>>> +
>>> +	chosen {
>>> +		stdout-path = "serial0:921600n8";
>>> +	};
>>> +};
>>> +
>>> +&uart0 {
>>> +	status = "okay";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dts b/arch/arm64/boot/dts/mediatek/mt6779.dts
>>> new file mode 100644
>>> index 0000000..daa25b7
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dts
>>> @@ -0,0 +1,229 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (c) 2019 MediaTek Inc.
>>> + * Author: Mars.C <mars.cheng at mediatek.com>
>>> + *
>>> + */
>>> +
>>> +#include <dt-bindings/clock/mt6779-clk.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> +/ {
>>> +	compatible = "mediatek,mt6779";
>>> +	interrupt-parent = <&sysirq>;
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	psci {
>>> +		compatible = "arm,psci-0.2";
>>> +		method = "smc";
>>> +	};
>>> +
>>> +	cpus {
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>> +
>>> +		cpu0: cpu at 0 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			enable-method = "psci";
>>> +			reg = <0x000>;
>>> +		};
>>> +
>>> +		cpu1: cpu at 1 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			enable-method = "psci";
>>> +			reg = <0x100>;
>>> +		};
>>> +
>>> +		cpu2: cpu at 2 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			enable-method = "psci";
>>> +			reg = <0x200>;
>>> +		};
>>> +
>>> +		cpu3: cpu at 3 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			enable-method = "psci";
>>> +			reg = <0x300>;
>>> +		};
>>> +
>>> +		cpu4: cpu at 4 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			enable-method = "psci";
>>> +			reg = <0x400>;
>>> +		};
>>> +
>>> +		cpu5: cpu at 5 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			enable-method = "psci";
>>> +			reg = <0x500>;
>>> +		};
>>> +
>>> +		cpu6: cpu at 6 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a75";
>>> +			enable-method = "psci";
>>> +			reg = <0x600>;
>>> +		};
>>> +
>>> +		cpu7: cpu at 7 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a75";
>>> +			enable-method = "psci";
>>> +			reg = <0x700>;
>>> +		};
>>> +	};
>>> +
>>> +	clk26m: oscillator at 0 {
>>> +		compatible = "fixed-clock";
>>> +		#clock-cells = <0>;
>>> +		clock-frequency = <26000000>;
>>> +		clock-output-names = "clk26m";
>>> +	};
>>> +
>>> +	clk32k: oscillator at 1 {
>>> +		compatible = "fixed-clock";
>>> +		#clock-cells = <0>;
>>> +		clock-frequency = <32768>;
>>> +		clock-output-names = "clk32k";
>>> +	};
>>> +
>>> +	uart_clk: dummy26m {
>>> +		compatible = "fixed-clock";
>>> +		clock-frequency = <26000000>;
>>> +		#clock-cells = <0>;
>>> +	};
>>> +
>>> +	timer {
>>> +		compatible = "arm,armv8-timer";
>>> +		interrupt-parent = <&gic>;
>>> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
>>> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
>>> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
>>> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
>>> +	};
>>> +
>>> +	soc {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		compatible = "simple-bus";
>>> +		ranges;
>>> +
>>> +		gic: interrupt-controller at 0c000000 {
>>> +			compatible = "arm,gic-v3";
>>> +			#interrupt-cells = <3>;
>>
>> You also haven't described the CPU PMUs. Depending on how they are wired
>> (SPIs or PPIs), you may have to change the interrupt-cells property to
>> include a cell for the PPI partitioning.
>>
> 
> pmu nodes would be:
> 
>         pmu {
>                 compatible = "arm,armv8-pmuv3";
>                 interrupt-parent = <&gic>;
>                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>         };
> 
>         dsu-pmu-0 {
>                 compatible = "arm,dsu-pmu";
>                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>                 cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
>                         <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
>         };
> 
> so I think interrupt-cells could be <3>, will add pmu nodes in v3.

No, that's wrong, at least for the CPU pmu node.

First, you need two of them (one for the A55s, one for the A75s).
Then you need to partition the corresponding PPI so that they can be
described as separate affinity sets.
Finally, this implies that #interrupt-cells goes up to 4, and all the
interrupts directly routed to the GIC must be updated.

You should have something like this:

	&gic {
		ppi-partitions {
			cluster0: interrupt-partition-0 {
				affinity = <&cpu0 &cpu1 &cpu2
                                            &cpu3 &cpu4 &cpu5>;
			};

			cluster1: interrupt-partition-1 {
				affinity = <&cpu6 &cpu7>;
			};
	};

	pmu_a55 {
		compatible = "arm,cortex-a55-pmu", "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &cluster0>;
	};

	pmu_a75 {
		compatible = "arm,cortex-a75-pmu", "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &cluster1>;
	};

Please see the rk3399 usage of the binding, as it is the canonical example.

> 
>>
>>> +			#address-cells = <2>;
>>> +			#size-cells = <2>;
>>> +			#redistributor-regions = <1>;
>>
>> This is the default, so this can be omitted.
>>
> 
> Got it, will remove it in v3.
> 
>>> +			interrupt-parent = <&gic>;
>>> +			interrupt-controller;
>>> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
>>> +			      <0 0x0c040000 0 0x200000>, /* GICR */
>>> +			      <0 0x0c400000 0 0x2000>,   /* GICC */
>>> +			      <0 0x0c410000 0 0x1000>,   /* GICH */
>>> +			      <0 0x0c420000 0 0x2000>;   /* GICV */
>>
>> Where do the last 3 ranges come from? Neither Cortex-A55 nor A75 have
>> the memory-mapped CPU interface. It looks like a copy/paste from another
>> SoC...
>>
> 
> My bad, should remove the last 3 interfaces. will do in v3.
> 
>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +		};
>>
>> And no ITS?
>>
> 
> No, we don't have ITS support in HW.

That's pretty sad.

	M.
-- 
Jazz is not dead, it just smells funny...



More information about the Linux-mediatek mailing list