[PATCH v2 11/11] arm64: dts: add dts nodes for MT6779

Marc Zyngier maz at kernel.org
Mon Aug 19 02:40:18 PDT 2019


On 19/08/2019 10:21, Mars Cheng wrote:
> this adds initial MT6779 dts settings fo board support,
> including cpu, gic, timer, ccf, pinctrl, uart...etc.
> 
> Signed-off-by: Mars Cheng <mars.cheng at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile        |    1 +
>  arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi |   31 ++++
>  arch/arm64/boot/dts/mediatek/mt6779.dts      |  229 ++++++++++++++++++++++++++
>  3 files changed, 261 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dts
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 458bbc4..53f1c61 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi b/arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi
> new file mode 100644
> index 0000000..164f5cb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dtsi
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng at mediatek.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt6779.dtsi"
> +
> +/ {
> +	model = "MediaTek MT6779 EVB";
> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	memory at 40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x1e800000>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:921600n8";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dts b/arch/arm64/boot/dts/mediatek/mt6779.dts
> new file mode 100644
> index 0000000..daa25b7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dts
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng at mediatek.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/mt6779-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "mediatek,mt6779";
> +	interrupt-parent = <&sysirq>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x000>;
> +		};
> +
> +		cpu1: cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x100>;
> +		};
> +
> +		cpu2: cpu at 2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x200>;
> +		};
> +
> +		cpu3: cpu at 3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x300>;
> +		};
> +
> +		cpu4: cpu at 4 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x400>;
> +		};
> +
> +		cpu5: cpu at 5 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x500>;
> +		};
> +
> +		cpu6: cpu at 6 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a75";
> +			enable-method = "psci";
> +			reg = <0x600>;
> +		};
> +
> +		cpu7: cpu at 7 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a75";
> +			enable-method = "psci";
> +			reg = <0x700>;
> +		};
> +	};
> +
> +	clk26m: oscillator at 0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <26000000>;
> +		clock-output-names = "clk26m";
> +	};
> +
> +	clk32k: oscillator at 1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "clk32k";
> +	};
> +
> +	uart_clk: dummy26m {
> +		compatible = "fixed-clock";
> +		clock-frequency = <26000000>;
> +		#clock-cells = <0>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller at 0c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;

You also haven't described the CPU PMUs. Depending on how they are wired
(SPIs or PPIs), you may have to change the interrupt-cells property to
include a cell for the PPI partitioning.


> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			#redistributor-regions = <1>;

This is the default, so this can be omitted.

> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
> +			      <0 0x0c040000 0 0x200000>, /* GICR */
> +			      <0 0x0c400000 0 0x2000>,   /* GICC */
> +			      <0 0x0c410000 0 0x1000>,   /* GICH */
> +			      <0 0x0c420000 0 0x2000>;   /* GICV */

Where do the last 3 ranges come from? Neither Cortex-A55 nor A75 have
the memory-mapped CPU interface. It looks like a copy/paste from another
SoC...

> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};

And no ITS?

	M.
-- 
Jazz is not dead, it just smells funny...



More information about the Linux-mediatek mailing list