[PATCH 1/1] drm/mediatek: Add support for mediatek SOC MT2712

CK Hu ck.hu at mediatek.com
Mon May 14 19:30:29 PDT 2018


Hi, Stu:

I've some inline comments.

On Mon, 2018-05-14 at 17:59 +0800, Stu Hsieh wrote:
> This patch add support for the Mediatek MT2712 DISP subsystem.
> There are two OVL engine and three disp output in MT2712.
> 
> Signed-off-by: Stu Hsieh <stu.hsieh at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp.c      | 77 ++++++++++++++++++++++++++---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |  4 ++
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  3 ++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c      | 44 +++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.h      |  7 ++-
>  5 files changed, 127 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index 8130f3dab661..641f4361b006 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -29,6 +29,8 @@
>  #define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN	0x084
>  #define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN	0x088
>  #define DISP_REG_CONFIG_DPI_SEL_IN		0x0ac
> +#define DISP_REG_CONFIG_DISP_RDMA2_SOUT		0x0b8
> +#define DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN	0x0c4
>  #define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN	0x0c8
>  #define DISP_REG_CONFIG_MMSYS_CG_CON0		0x100
>  
> @@ -41,6 +43,7 @@
>  #define DISP_REG_MUTEX_RST(n)	(0x28 + 0x20 * (n))
>  #define DISP_REG_MUTEX_MOD(n)	(0x2c + 0x20 * (n))
>  #define DISP_REG_MUTEX_SOF(n)	(0x30 + 0x20 * (n))
> +#define DISP_REG_MUTEX_MOD2(n)	(0x34 + 0x20 * (n))
>  
>  #define INT_MUTEX				BIT(1)
>  
> @@ -60,6 +63,25 @@
>  #define MT8173_MUTEX_MOD_DISP_PWM1		BIT(24)
>  #define MT8173_MUTEX_MOD_DISP_OD		BIT(25)
>  
> +#define MT2712_MUTEX_MOD_DISP_OVL0		BIT(11)
> +#define MT2712_MUTEX_MOD_DISP_OVL1		BIT(12)
> +#define MT2712_MUTEX_MOD_DISP_RDMA0		BIT(13)
> +#define MT2712_MUTEX_MOD_DISP_RDMA1		BIT(14)
> +#define MT2712_MUTEX_MOD_DISP_RDMA2		BIT(15)
> +#define MT2712_MUTEX_MOD_DISP_WDMA0		BIT(16)
> +#define MT2712_MUTEX_MOD_DISP_WDMA1		BIT(17)
> +#define MT2712_MUTEX_MOD_DISP_COLOR0		BIT(18)
> +#define MT2712_MUTEX_MOD_DISP_COLOR1		BIT(19)
> +#define MT2712_MUTEX_MOD_DISP_AAL		BIT(20)
> +#define MT2712_MUTEX_MOD_DISP_UFOE		BIT(22)
> +#define MT2712_MUTEX_MOD_DISP_PWM0		BIT(23)
> +#define MT2712_MUTEX_MOD_DISP_PWM1		BIT(24)
> +#define MT2712_MUTEX_MOD_DISP_PWM2		BIT(10)
> +#define MT2712_MUTEX_MOD_DISP_OD		BIT(25)
> +/* modules more than 32, add BIT(31) when using DISP_REG_MUTEX_MOD2 bit */
> +#define MT2712_MUTEX_MOD2_DISP_AAL1		(BIT(1) | BIT(31))
> +#define MT2712_MUTEX_MOD2_DISP_OD1		(BIT(2) | BIT(31))
> +

It looks like that MUTEX_MOD definition varies for each SoC. I think
such definition should be passed from dts to prevent modify driver for
each SoC. For example, the clock definition varies for each SoC, and its
definition is placed in [1]. The dts [2] include the header file and
pass the clock definition to driver.

[1]
https://elixir.bootlin.com/linux/v4.17-rc5/source/include/dt-bindings/clock/mt2712-clk.h 
[2]
https://elixir.bootlin.com/linux/v4.17-rc5/source/arch/arm64/boot/dts/mediatek/mt2712e.dtsi

>  #define MT2701_MUTEX_MOD_DISP_OVL		BIT(3)
>  #define MT2701_MUTEX_MOD_DISP_WDMA		BIT(6)
>  #define MT2701_MUTEX_MOD_DISP_COLOR		BIT(7)
> @@ -74,6 +96,7 @@
>  
>  #define OVL0_MOUT_EN_COLOR0		0x1
>  #define OD_MOUT_EN_RDMA0		0x1
> +#define OD1_MOUT_EN_RDMA1		BIT(16)
>  #define UFOE_MOUT_EN_DSI0		0x1
>  #define COLOR0_SEL_IN_OVL0		0x1
>  #define OVL1_MOUT_EN_COLOR1		0x1
> @@ -108,6 +131,26 @@ static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = {
>  	[DDP_COMPONENT_WDMA0] = MT2701_MUTEX_MOD_DISP_WDMA,
>  };
>  
> +static const unsigned int mt2712_mutex_mod[DDP_COMPONENT_ID_MAX] = {
> +	[DDP_COMPONENT_AAL] = MT2712_MUTEX_MOD_DISP_AAL,
> +	[DDP_COMPONENT_AAL1] = MT2712_MUTEX_MOD2_DISP_AAL1,
> +	[DDP_COMPONENT_COLOR0] = MT2712_MUTEX_MOD_DISP_COLOR0,
> +	[DDP_COMPONENT_COLOR1] = MT2712_MUTEX_MOD_DISP_COLOR1,
> +	[DDP_COMPONENT_OD] = MT2712_MUTEX_MOD_DISP_OD,
> +	[DDP_COMPONENT_OD1] = MT2712_MUTEX_MOD2_DISP_OD1,
> +	[DDP_COMPONENT_OVL0] = MT2712_MUTEX_MOD_DISP_OVL0,
> +	[DDP_COMPONENT_OVL1] = MT2712_MUTEX_MOD_DISP_OVL1,
> +	[DDP_COMPONENT_PWM0] = MT2712_MUTEX_MOD_DISP_PWM0,
> +	[DDP_COMPONENT_PWM1] = MT2712_MUTEX_MOD_DISP_PWM1,
> +	[DDP_COMPONENT_PWM2] = MT2712_MUTEX_MOD_DISP_PWM2,
> +	[DDP_COMPONENT_RDMA0] = MT2712_MUTEX_MOD_DISP_RDMA0,
> +	[DDP_COMPONENT_RDMA1] = MT2712_MUTEX_MOD_DISP_RDMA1,
> +	[DDP_COMPONENT_RDMA2] = MT2712_MUTEX_MOD_DISP_RDMA2,
> +	[DDP_COMPONENT_UFOE] = MT2712_MUTEX_MOD_DISP_UFOE,
> +	[DDP_COMPONENT_WDMA0] = MT2712_MUTEX_MOD_DISP_WDMA0,
> +	[DDP_COMPONENT_WDMA1] = MT2712_MUTEX_MOD_DISP_WDMA1,
> +};
> +
>  static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = {
>  	[DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL,
>  	[DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0,
> @@ -150,6 +193,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
>  	} else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) {
>  		*addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN;
>  		value = GAMMA_MOUT_EN_RDMA1;
> +	} else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
> +		*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
> +		value = OD1_MOUT_EN_RDMA1;

I think this should be moved to an independent patch and its title is
'add connection from OD1 to RDMA1'.

>  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
>  		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
>  		value = RDMA1_MOUT_DPI0;
> @@ -278,6 +324,7 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
>  	struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
>  					   mutex[mutex->id]);
>  	unsigned int reg;
> +	unsigned int offset;
>  
>  	WARN_ON(&ddp->mutex[mutex->id] != mutex);
>  
> @@ -292,9 +339,17 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
>  		reg = MUTEX_SOF_DPI0;
>  		break;
>  	default:
> -		reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
> -		reg |= ddp->mutex_mod[id];
> -		writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
> +		if (ddp->mutex_mod[id] <= BIT(31)) {

You could reduce one byte if you write as

if (ddp->mutex_mod[id] < BIT(32))

> +			offset = DISP_REG_MUTEX_MOD(mutex->id);
> +			reg = readl_relaxed(ddp->regs + offset);
> +			reg |= ddp->mutex_mod[id];
> +			writel_relaxed(reg, ddp->regs + offset);
> +		} else {
> +			offset = DISP_REG_MUTEX_MOD2(mutex->id);
> +			reg = readl_relaxed(ddp->regs + offset);
> +			reg |= (ddp->mutex_mod[id] & ~BIT(31));
> +			writel_relaxed(reg, ddp->regs + offset);
> +		}

I think this should be moved to an independent patch and its title is
'support maximum 64 mutex mod'.

>  		return;
>  	}
>  
> @@ -307,6 +362,7 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex,
>  	struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
>  					   mutex[mutex->id]);
>  	unsigned int reg;
> +	unsigned int offset;
>  
>  	WARN_ON(&ddp->mutex[mutex->id] != mutex);
>  
> @@ -318,9 +374,17 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex,
>  			       ddp->regs + DISP_REG_MUTEX_SOF(mutex->id));
>  		break;
>  	default:
> -		reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
> -		reg &= ~(ddp->mutex_mod[id]);
> -		writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
> +		if (ddp->mutex_mod[id] <= BIT(31)) {
> +			offset = DISP_REG_MUTEX_MOD(mutex->id);
> +			reg = readl_relaxed(ddp->regs + offset);
> +			reg &= ~(ddp->mutex_mod[id]);
> +			writel_relaxed(reg, ddp->regs + offset);
> +		} else {
> +			offset = DISP_REG_MUTEX_MOD2(mutex->id);
> +			reg = readl_relaxed(ddp->regs + offset);
> +			reg &= ~(ddp->mutex_mod[id] & ~BIT(31));
> +			writel_relaxed(reg, ddp->regs + offset);
> +		}
>  		break;
>  	}
>  }
> @@ -407,6 +471,7 @@ static int mtk_ddp_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id ddp_driver_dt_match[] = {
>  	{ .compatible = "mediatek,mt2701-disp-mutex", .data = mt2701_mutex_mod},
> +	{ .compatible = "mediatek,mt2712-disp-mutex", .data = mt2712_mutex_mod},
>  	{ .compatible = "mediatek,mt8173-disp-mutex", .data = mt8173_mutex_mod},
>  	{},
>  };
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 4672317e3ad1..ebe8f0018b31 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -219,6 +219,7 @@ struct mtk_ddp_comp_match {
>  
>  static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
>  	[DDP_COMPONENT_AAL]	= { MTK_DISP_AAL,	0, &ddp_aal },
> +	[DDP_COMPONENT_AAL1]	= { MTK_DISP_AAL,	1, &ddp_aal },

For the naming consistency, there are COLOR0 and COLOR1, so after you
add 'AAL1', you should change AAL to AAL0. And this modification should
be an independent patch.

>  	[DDP_COMPONENT_BLS]	= { MTK_DISP_BLS,	0, NULL },
>  	[DDP_COMPONENT_COLOR0]	= { MTK_DISP_COLOR,	0, NULL },
>  	[DDP_COMPONENT_COLOR1]	= { MTK_DISP_COLOR,	1, NULL },
> @@ -227,9 +228,12 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
>  	[DDP_COMPONENT_DSI1]	= { MTK_DSI,		1, NULL },
>  	[DDP_COMPONENT_GAMMA]	= { MTK_DISP_GAMMA,	0, &ddp_gamma },
>  	[DDP_COMPONENT_OD]	= { MTK_DISP_OD,	0, &ddp_od },
> +	[DDP_COMPONENT_OD1]	= { MTK_DISP_OD,	1, &ddp_od },

Ditto.

>  	[DDP_COMPONENT_OVL0]	= { MTK_DISP_OVL,	0, NULL },
>  	[DDP_COMPONENT_OVL1]	= { MTK_DISP_OVL,	1, NULL },
>  	[DDP_COMPONENT_PWM0]	= { MTK_DISP_PWM,	0, NULL },
> +	[DDP_COMPONENT_PWM1]	= { MTK_DISP_PWM,	1, NULL },
> +	[DDP_COMPONENT_PWM2]	= { MTK_DISP_PWM,	2, NULL },
>  	[DDP_COMPONENT_RDMA0]	= { MTK_DISP_RDMA,	0, NULL },
>  	[DDP_COMPONENT_RDMA1]	= { MTK_DISP_RDMA,	1, NULL },
>  	[DDP_COMPONENT_RDMA2]	= { MTK_DISP_RDMA,	2, NULL },
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 0828cf8bf85c..43100f9215ae 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -42,6 +42,7 @@ enum mtk_ddp_comp_type {
>  
>  enum mtk_ddp_comp_id {
>  	DDP_COMPONENT_AAL,
> +	DDP_COMPONENT_AAL1,
>  	DDP_COMPONENT_BLS,
>  	DDP_COMPONENT_COLOR0,
>  	DDP_COMPONENT_COLOR1,
> @@ -50,10 +51,12 @@ enum mtk_ddp_comp_id {
>  	DDP_COMPONENT_DSI1,
>  	DDP_COMPONENT_GAMMA,
>  	DDP_COMPONENT_OD,
> +	DDP_COMPONENT_OD1,
>  	DDP_COMPONENT_OVL0,
>  	DDP_COMPONENT_OVL1,
>  	DDP_COMPONENT_PWM0,
>  	DDP_COMPONENT_PWM1,
> +	DDP_COMPONENT_PWM2,
>  	DDP_COMPONENT_RDMA0,
>  	DDP_COMPONENT_RDMA1,
>  	DDP_COMPONENT_RDMA2,
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index a2ca90fc403c..41baf6653bfc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -146,6 +146,32 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
>  	DDP_COMPONENT_DPI0,
>  };
>  
> +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_main[] = {
> +	DDP_COMPONENT_OVL0,
> +	DDP_COMPONENT_COLOR0,
> +	DDP_COMPONENT_AAL,
> +	DDP_COMPONENT_OD,
> +	DDP_COMPONENT_RDMA0,
> +	DDP_COMPONENT_DPI0,
> +	DDP_COMPONENT_PWM0,
> +};
> +
> +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_ext[] = {
> +	DDP_COMPONENT_OVL1,
> +	DDP_COMPONENT_COLOR1,
> +	DDP_COMPONENT_AAL1,
> +	DDP_COMPONENT_OD1,
> +	DDP_COMPONENT_RDMA1,
> +	DDP_COMPONENT_DPI1,
> +	DDP_COMPONENT_PWM1,
> +};
> +
> +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = {
> +	DDP_COMPONENT_RDMA2,
> +	DDP_COMPONENT_DSI2,
> +	DDP_COMPONENT_PWM2,
> +};
> +

It looks like that the path definition varies for each SoC. I think such
definition should be passed from dts to prevent modify driver for each
SoC. In [3], it define the partial connection in device tree, but I
would like this to be more general. My idea is:

1. Each component has one or two endpoint in device tree. The first and
the last has one, and the others has two.
2. Remove mtxxxx_mtk_ddp_main[] and mtxxxx_mtk_ddp_ext[], use multiple
link list (One display path has one link list, two display path has two
link list) to generate it by parsing device tree in mtk_drm_probe().

[3] https://patchwork.kernel.org/patch/10397337/

>  static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
>  	DDP_COMPONENT_OVL0,
>  	DDP_COMPONENT_COLOR0,
> @@ -173,6 +199,15 @@ static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
>  	.shadow_register = true,
>  };
>  
> +static const struct mtk_mmsys_driver_data mt2712_mmsys_driver_data = {
> +	.main_path = mt2712_mtk_ddp_main,
> +	.main_len = ARRAY_SIZE(mt2712_mtk_ddp_main),
> +	.ext_path = mt2712_mtk_ddp_ext,
> +	.ext_len = ARRAY_SIZE(mt2712_mtk_ddp_ext),
> +	.third_path = mt2712_mtk_ddp_third,
> +	.third_len = ARRAY_SIZE(mt2712_mtk_ddp_third),
> +};
> +
>  static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
>  	.main_path = mt8173_mtk_ddp_main,
>  	.main_len = ARRAY_SIZE(mt8173_mtk_ddp_main),
> @@ -232,6 +267,11 @@ static int mtk_drm_kms_init(struct drm_device *drm)
>  	if (ret < 0)
>  		goto err_component_unbind;
>  
> +	ret = mtk_drm_crtc_create(drm, private->data->third_path,
> +				  private->data->third_len);
> +	if (ret < 0)
> +		goto err_component_unbind;
> +
>  	/* Use OVL device for all DMA memory allocations */
>  	np = private->comp_node[private->data->main_path[0]] ?:
>  	     private->comp_node[private->data->ext_path[0]];
> @@ -372,8 +412,10 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
>  	{ .compatible = "mediatek,mt8173-disp-ufoe",  .data = (void *)MTK_DISP_UFOE },
>  	{ .compatible = "mediatek,mt2701-dsi",	      .data = (void *)MTK_DSI },
>  	{ .compatible = "mediatek,mt8173-dsi",        .data = (void *)MTK_DSI },
> +	{ .compatible = "mediatek,mt2712-dpi",        .data = (void *)MTK_DPI },

Move this modification to the patch which modify the dpi driver for
mt2712.

>  	{ .compatible = "mediatek,mt8173-dpi",        .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt2701-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
> +	{ .compatible = "mediatek,mt2712-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
>  	{ .compatible = "mediatek,mt8173-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
>  	{ .compatible = "mediatek,mt2701-disp-pwm",   .data = (void *)MTK_DISP_BLS },
>  	{ .compatible = "mediatek,mt8173-disp-pwm",   .data = (void *)MTK_DISP_PWM },
> @@ -552,6 +594,8 @@ static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend,
>  static const struct of_device_id mtk_drm_of_ids[] = {
>  	{ .compatible = "mediatek,mt2701-mmsys",
>  	  .data = &mt2701_mmsys_driver_data},
> +	{ .compatible = "mediatek,mt2712-mmsys",
> +	  .data = &mt2712_mmsys_driver_data},
>  	{ .compatible = "mediatek,mt8173-mmsys",
>  	  .data = &mt8173_mmsys_driver_data},
>  	{ }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> index c3378c452c0a..e821342bc2d3 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> @@ -17,8 +17,8 @@
>  #include <linux/io.h>
>  #include "mtk_drm_ddp_comp.h"
>  
> -#define MAX_CRTC	2
> -#define MAX_CONNECTOR	2
> +#define MAX_CRTC	3
> +#define MAX_CONNECTOR	3
>  
>  struct device;
>  struct device_node;
> @@ -33,6 +33,9 @@ struct mtk_mmsys_driver_data {
>  	unsigned int main_len;
>  	const enum mtk_ddp_comp_id *ext_path;
>  	unsigned int ext_len;
> +	enum mtk_ddp_comp_id *third_path;
> +	unsigned int third_len;
> +
>  	bool shadow_register;
>  };
>  

Regards,
CK




More information about the Linux-mediatek mailing list