[PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer

[Andrzej Hajda]

On 07.05.2018 15:53, Daniel Vetter wrote:
> On Mon, May 07, 2018 at 02:59:45PM +0200, Andrzej Hajda wrote:
>> On 04.05.2018 15:52, Peter Rosin wrote:
>>> If the bridge supplier is unbound, this will bring the bridge consumer
>>> down along with the bridge. Thus, there will no longer linger any
>>> dangling pointers from the bridge consumer (the drm_device) to some
>>> non-existent bridge supplier.
>> I understand rationales behind this patch, but it is another step into
>> making drm_dev one big driver with subcomponents, where drm will work
>> only if every subcomponent is working/loaded. Do we need to go this way?
>> In case of many platforms such approach results in display turned on
>> very late on boot for example due to late initialization of some
>> regulator exposed by some i2c device, which is used by hdmi bridge. And
>> this hdmi bridge is just to provide alternative(rarely used) display
>> path, the main display path would work anyway.
>>
>> So the main question to drm maintainers is about evolution of bridges,
>> if drm_bridges should become mandatory components of drm device or they
>> could be added/removed dynamically?
> This is already the case. You currently cannot hotplug a drm_bridge,
> everything must be present.

Are you sure? DRM core is changing quite fast, so maybe I have missed
something, but AFAIK core calls bridge code only if full display
pipeline is created and connector is in connected state.
So adding and removing bridges from inactive pipelines should work if
coded properly.

>  I don't think it makes sense to change that
> until we have physically hotpluggable drm_bridges in real hardware.

But kernel core already assumes that device drivers are hot-pluggable
:), even this patch is created to solve issues regarding driver hot
unplugging.

>  I
> definitely don't want to refcount stuff to work around driver load
> bonghits on DT platforms, because refcounting is way too hard to get right
> :-)

I am not sure about bridges, but I have successfully (IMO) experimented
with hot (un)plugging panel driver, see panel-samsung-s6e8aa0.c driver
and exynos_drm_dsi.c, panel driver can be safely
plugged/unplugged/replugged without any refcounting (but with help of
mipi_dsi attach/detach callbacks, which are not available for
non-mipi-dsi drivers).

Regards
Andrzej

>
> Afaik there's out-of-tree patches to solve 99% of the driver load fun on
> DT platforms, but because it's not a 100% solution it's blocked since
> forever.
> -Daniel
>
>> Regards
>> Andrzej
>>
>>
>>> Signed-off-by: Peter Rosin <peda at axentia.se>
>>> ---
>>>  drivers/gpu/drm/drm_bridge.c | 18 ++++++++++++++++++
>>>  include/drm/drm_bridge.h     |  2 ++
>>>  2 files changed, 20 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
>>> index 78d186b6831b..0259f0a3ff27 100644
>>> --- a/drivers/gpu/drm/drm_bridge.c
>>> +++ b/drivers/gpu/drm/drm_bridge.c
>>> @@ -26,6 +26,7 @@
>>>  #include <linux/mutex.h>
>>>  
>>>  #include <drm/drm_bridge.h>
>>> +#include <drm/drm_device.h>
>>>  #include <drm/drm_encoder.h>
>>>  
>>>  #include "drm_crtc_internal.h"
>>> @@ -127,12 +128,25 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
>>>  	if (bridge->dev)
>>>  		return -EBUSY;
>>>  
>>> +	if (encoder->dev->dev != bridge->odev) {
>>> +		bridge->link = device_link_add(encoder->dev->dev,
>>> +					       bridge->odev, 0);
>>> +		if (!bridge->link) {
>>> +			dev_err(bridge->odev, "failed to link bridge to %s\n",
>>> +				dev_name(encoder->dev->dev));
>>> +			return -EINVAL;
>>> +		}
>>> +	}
>>> +
>>>  	bridge->dev = encoder->dev;
>>>  	bridge->encoder = encoder;
>>>  
>>>  	if (bridge->funcs->attach) {
>>>  		ret = bridge->funcs->attach(bridge);
>>>  		if (ret < 0) {
>>> +			if (bridge->link)
>>> +				device_link_del(bridge->link);
>>> +			bridge->link = NULL;
>>>  			bridge->dev = NULL;
>>>  			bridge->encoder = NULL;
>>>  			return ret;
>>> @@ -159,6 +173,10 @@ void drm_bridge_detach(struct drm_bridge *bridge)
>>>  	if (bridge->funcs->detach)
>>>  		bridge->funcs->detach(bridge);
>>>  
>>> +	if (bridge->link)
>>> +		device_link_del(bridge->link);
>>> +	bridge->link = NULL;
>>> +
>>>  	bridge->dev = NULL;
>>>  }
>>>  
>>> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
>>> index b656e505d11e..804189c63a4c 100644
>>> --- a/include/drm/drm_bridge.h
>>> +++ b/include/drm/drm_bridge.h
>>> @@ -261,6 +261,7 @@ struct drm_bridge_timings {
>>>   * @list: to keep track of all added bridges
>>>   * @timings: the timing specification for the bridge, if any (may
>>>   * be NULL)
>>> + * @link: drm consumer <-> bridge supplier
>>>   * @funcs: control functions
>>>   * @driver_private: pointer to the bridge driver's internal context
>>>   */
>>> @@ -271,6 +272,7 @@ struct drm_bridge {
>>>  	struct drm_bridge *next;
>>>  	struct list_head list;
>>>  	const struct drm_bridge_timings *timings;
>>> +	struct device_link *link;
>>>  
>>>  	const struct drm_bridge_funcs *funcs;
>>>  	void *driver_private;
>>