[PATCH v1 12/19] arm: dts: mt7623: fix all Warnings (unit_address_vs_reg)
Matthias Brugger
matthias.bgg at gmail.com
Sun Mar 18 14:54:48 PDT 2018
On 02/23/2018 11:16 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang at mediatek.com>
>
> Fix below a lot of warnings that dtc complains so much
>
> Warning (unit_address_vs_reg): Node /oscillator at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /oscillator at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/cir at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2c at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2c at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2s at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2s at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/keys at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/leds at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/pwm at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/spi at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/uart at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/uart at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl at 10005000/uart at 2 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /ethernet at 1b100000/mdio-bus/switch at 0/ports has a reg or ranges property, but no unit name
>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: devicetree at vger.kernel.org
> ---
> arch/arm/boot/dts/mt7623.dtsi | 4 ++--
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 29 +++++++++++++--------------
> arch/arm/boot/dts/mt7623n-rfb.dtsi | 2 +-
> 3 files changed, 17 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 4b68448..bf9db44 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -130,14 +130,14 @@
> #clock-cells = <0>;
> };
>
> - rtc32k: oscillator at 1 {
> + rtc32k: oscillator-1 {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <32000>;
> clock-output-names = "rtc32k";
> };
>
> - clk26m: oscillator at 0 {
> + clk26m: oscillator-0 {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <26000000>;
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index a6295ef..75e61c4 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -158,7 +158,6 @@
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> - reg = <0>;
>
> port at 0 {
> reg = <0>;
> @@ -262,14 +261,14 @@
> };
>
> &pio {
> - cir_pins_a:cir at 0 {
> + cir_pins_a:cir-default {
> pins-cir {
> pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
> bias-disable;
> };
> };
>
> - i2c0_pins_a: i2c at 0 {
> + i2c0_pins_a: i2c0-default {
> pins-i2c0 {
> pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
> <MT7623_PIN_76_SCL0_FUNC_SCL0>;
> @@ -277,7 +276,7 @@
> };
> };
>
> - i2c1_pins_a: i2c at 1 {
> + i2c1_pins_a: i2c1-default {
> pin-i2c1 {
> pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
> <MT7623_PIN_58_SCL1_FUNC_SCL1>;
> @@ -285,7 +284,7 @@
> };
> };
>
> - i2s0_pins_a: i2s at 0 {
> + i2s0_pins_a: i2s0-default {
> pin-i2s0 {
> pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
> <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
> @@ -297,7 +296,7 @@
> };
> };
>
> - i2s1_pins_a: i2s at 1 {
> + i2s1_pins_b: i2s1-default {
Why does this change from i2s1_pins_a to i2s1_pins_b?
> pin-i2s1 {
> pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
> <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
> @@ -309,7 +308,7 @@
> };
> };
>
> - key_pins_a: keys at 0 {
> + key_pins_a: keys-alt {
> pins-keys {
> pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
> <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
> @@ -317,7 +316,7 @@
> };
> };
>
> - led_pins_a: leds at 0 {
> + led_pins_a: leds-alt {
> pins-leds {
> pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
> <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
> @@ -428,15 +427,15 @@
> };
> };
>
> - pcie_default: pcie_pin_default {
> - pins_cmd_dat {
> + pcie_default: pcie-pin-default {
> + pins-cmd-dat {
No pcie node present in upstream. Please rebase.
Regards,
Matthias
> pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
> <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
> bias-disable;
> };
> };
>
> - pwm_pins_a: pwm at 0 {
> + pwm_pins_a: pwm-default {
> pins-pwm {
> pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
> <MT7623_PIN_204_PWM1_FUNC_PWM1>,
> @@ -446,7 +445,7 @@
> };
> };
>
> - spi0_pins_a: spi at 0 {
> + spi0_pins_a: spi0-default {
> pins-spi {
> pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
> <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
> @@ -456,21 +455,21 @@
> };
> };
>
> - uart0_pins_a: uart at 0 {
> + uart0_pins_a: uart0-default {
> pins-dat {
> pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
> <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
> };
> };
>
> - uart1_pins_a: uart at 1 {
> + uart1_pins_a: uart1-default {
> pins-dat {
> pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
> <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
> };
> };
>
> - uart2_pins_a: uart at 2 {
> + uart2_pins_a: uart2-default {
> pins-dat {
> pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
> <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
> diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> index 256c5fd..128586d 100644
> --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
> +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> @@ -50,7 +50,7 @@
> reg = <0 0x80000000 0 0x40000000>;
> };
>
> - usb_p1_vbus: regulator at 0 {
> + usb_p1_vbus: regulator-5v {
> compatible = "regulator-fixed";
> regulator-name = "usb_vbus";
> regulator-min-microvolt = <5000000>;
>
More information about the Linux-mediatek
mailing list