[RFC/RFT usb-next v1 5/6] usb: chipidea: do not set the "phy" field in struct usb_hcd

[Peter Chen]

> 
> Now that usb_add_hcd parses all generic PHYs anyways the code which skips
> initialization of a single PHY will go away.
> Remove the code which sets struct usb_hcd's phy field from the chipidea driver as
> this field will go away soon.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  drivers/usb/chipidea/host.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index
> 19d60ed7e41f..fc324767cb0f 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -124,9 +124,7 @@ static int host_start(struct ci_hdrc *ci)
> 
>  	hcd->power_budget = ci->platdata->power_budget;
>  	hcd->tpl_support = ci->platdata->tpl_support;
> -	if (ci->phy)
> -		hcd->phy = ci->phy;
> -	else
> +	if (!ci->phy)
>  		hcd->usb_phy = ci->usb_phy;
> 

The reason hcd->phy is initialized by chipidea core is we do not need HCD core to
touch PHY, and PHY operation is shared for both device and host mode for chipidea.

If I understand correct, your HCD core PHY wrapper patch set will do PHY operation if
there is a "phy" node under controller's? If it is correct, you may supply one way to let
the HCD core bypass phy operations for some USB controllers, eg dual-role controllers.
Thanks.

Peter