[PATCH v3 3/7] watchdog: sirfsoc: allow setting timeout in devicetree

Rob Herring robh at kernel.org
Wed Feb 21 16:02:02 PST 2018


On Sun, Feb 18, 2018 at 7:07 PM, Guenter Roeck <linux at roeck-us.net> wrote:
> On 02/18/2018 04:07 PM, Rob Herring wrote:
>>
>> On Sun, Feb 11, 2018 at 09:08:43PM +0100, Marcus Folkesson wrote:
>>>
>>> watchdog_init_timeout() will allways pick timeout_param since it
>>> defaults to a valid timeout.
>>>
>>> By following best practice described in
>>> Documentation/watchdog/watchdog-kernel-api.txt, it also
>>> let us to set timout-sec property in devicetree.
>>
>>
>> typo
>>
>>>
>>> Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
>>> Reviewed-by: Guenter Roeck <linux at roeck-us.net>
>>> ---
>>>   Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt | 4 ++++
>>>   drivers/watchdog/sirfsoc_wdt.c                             | 2 +-
>>>   2 files changed, 5 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt
>>> b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt
>>> index 9cbc76c89b2b..0dce5e3100b4 100644
>>> --- a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt
>>> +++ b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt
>>> @@ -5,10 +5,14 @@ Required properties:
>>>   - reg: Address range of tick timer/WDT register set
>>>   - interrupts: interrupt number to the cpu
>>>   +Optional properties:
>>> +- timeout-sec : Contains the watchdog timeout in seconds
>>> +
>>>   Example:
>>>     timer at b0020000 {
>>>         compatible = "sirf,prima2-tick";
>>>         reg = <0xb0020000 0x1000>;
>>>         interrupts = <0>;
>>> +       timeout-sec = <30>;
>>>   };
>>> diff --git a/drivers/watchdog/sirfsoc_wdt.c
>>> b/drivers/watchdog/sirfsoc_wdt.c
>>> index 4eea351e09b0..ac0c9d2c4aee 100644
>>> --- a/drivers/watchdog/sirfsoc_wdt.c
>>> +++ b/drivers/watchdog/sirfsoc_wdt.c
>>> @@ -29,7 +29,7 @@
>>>   #define SIRFSOC_WDT_MAX_TIMEOUT               (10 * 60)       /* 10
>>> mins */
>>>   #define SIRFSOC_WDT_DEFAULT_TIMEOUT   30              /* 30 secs */
>>>   -static unsigned int timeout = SIRFSOC_WDT_DEFAULT_TIMEOUT;
>>> +static unsigned int timeout;
>>
>>
>> If you have an old dtb, then you still need the default.
>>
>
> No. It is optional to start with, and the driver already has
>
> static struct watchdog_device sirfsoc_wdd = {
>         .info = &sirfsoc_wdt_ident,
>         .ops = &sirfsoc_wdt_ops,
>         .timeout = SIRFSOC_WDT_DEFAULT_TIMEOUT,                 <------
>         .min_timeout = SIRFSOC_WDT_MIN_TIMEOUT,
>         .max_timeout = SIRFSOC_WDT_MAX_TIMEOUT,
> };

Okay, then:

Reviewed-by: Rob Herring <robh at kernel.org>

for the lot.

Rob



More information about the Linux-mediatek mailing list