[PATCH 03/10] ARM: dts: mt7623: Remove "cooling-{min|max}-level" for CPU nodes

[Viresh Kumar]

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt | 4 ----
 arch/arm/boot/dts/mt7623.dtsi                                  | 2 --
 2 files changed, 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index f6403089edcf..d36f07e0a2bb 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -21,8 +21,6 @@ Binding for MediaTek's CPUFreq driver
 	       flow is handled by hardware, hence no software "voltage tracking" is
 	       needed.
 - #cooling-cells:
-- cooling-min-level:
-- cooling-max-level:
 	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt
 	for detail.
 
@@ -67,8 +65,6 @@ Binding for MediaTek's CPUFreq driver
 		clock-names = "cpu", "intermediate";
 		operating-points-v2 = <&cpu_opp_table>;
 		#cooling-cells = <2>;
-		cooling-min-level = <0>;
-		cooling-max-level = <7>;
 	};
 	cpu at 1 {
 		device_type = "cpu";
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b750da5362f7..8e7c65464c9d 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -87,8 +87,6 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			clock-frequency = <1300000000>;
 		};
 
-- 
2.15.0.194.g9af6a3dea062