[PATCH v3 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

Rob Herring robh at kernel.org
Tue Sep 5 09:05:27 PDT 2017


On Fri, Sep 1, 2017 at 9:16 PM, Chen Zhong <chen.zhong at mediatek.com> wrote:
> On Thu, 2017-08-31 at 14:52 -0500, Rob Herring wrote:
>> On Fri, Aug 25, 2017 at 02:32:30PM +0800, Chen Zhong wrote:
>> > This patch adds the device tree binding documentation for the MediaTek
>> > pmic keys found on PMIC MT6397/MT6323.
>> >
>> > Signed-off-by: Chen Zhong <chen.zhong at mediatek.com>
>> > ---
>> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   38 ++++++++++++++++++++
>> >  1 file changed, 38 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > new file mode 100644
>> > index 0000000..100ec44
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > @@ -0,0 +1,38 @@
>> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
>> > +
>> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
>> > +and homekey. The key functions are defined as the subnode of the function
>> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
>> > +of Muti-Function Device (MFD)
>> > +
>> > +For MT6397/MT6323 MFD bindings see:
>> > +Documentation/devicetree/bindings/mfd/mt6397.txt
>> > +
>> > +Required properties:
>> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>> > +- linux,keycodes: Specifies the numeric keycode values to
>> > +   be used for reporting keys presses. The array can
>> > +   contain up to 2 entries.
>> > +
>> > +Optional Properties:
>> > +- wakeup-source: each key can be used as a wakeup source.
>>
>> wakeup-source is defined as a boolean.
>
> Hi Rob,
>
> Could I modify it as this?
>
> mediatek,wakeup-keys = <1>, <0>;
> wakeup-source;

What do the values and index signify? The power key is index 0 and the
value 1 means enable wakeup? Or each value is the raw key (i.e.
indexes in linux,keycode) that wakeup is enabled for?

I don't think this should be in DT really. It's really up to the user
(i.e. userspace) to decide what keys cause wakeup (or maybe that's
only suspend). If you default to the power key causes wakeup, do you
really need to support different options?

If we do put this in DT, then it should be a common binding to specify
keys that cause wake-up.

Rob



More information about the Linux-mediatek mailing list