[PATCH v2 2/4] rtc: mediatek: add driver for RTC on MT7622 SoC

[Alexandre Belloni]

On 19/10/2017 at 10:55:49 +0800, Sean Wang wrote:
> Hi, both
> 
> On Wed, 2017-10-18 at 14:57 +0200, Alexandre Belloni wrote:
> > On 18/10/2017 at 19:12:06 +0800, Yingjoe Chen wrote:
> > > On Tue, 2017-10-17 at 17:40 +0800, sean.wang at mediatek.com wrote:
> > > > From: Sean Wang <sean.wang at mediatek.com>
> > > > 
> > > > This patch introduces the driver for the RTC on MT7622 SoC.
> > > > 
> > > > Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> > > > ---
> > > >  drivers/rtc/Kconfig      |  10 ++
> > > >  drivers/rtc/Makefile     |   1 +
> > > >  drivers/rtc/rtc-mt7622.c | 418 +++++++++++++++++++++++++++++++++++++++++++++++
> > > >  3 files changed, 429 insertions(+)
> > > >  create mode 100644 drivers/rtc/rtc-mt7622.c
> > > > 
> > > > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > > > index e0e58f3..4226295 100644
> > > > --- a/drivers/rtc/Kconfig
> > > > +++ b/drivers/rtc/Kconfig
> > > > @@ -1705,6 +1705,16 @@ config RTC_DRV_MOXART
> > > >  	   This driver can also be built as a module. If so, the module
> > > >  	   will be called rtc-moxart
> > > >  
> > > > +config RTC_DRV_MEDIATEK
> > > 
> > > How about changing this to RTC_DRV_MT7622 or RTC_DRV_MEDIATEK_SOC?
> > > It is confusing to have both RTC_DRV_MEDIATEK & RTC_DRV_MT6397 here.
> > > 
> > 
> > Yes, this has to be RTC_DRV_MT7622. It doesn't matter if it support
> > future SoCs named differently, it will be less confusing than using
> > anything with only mediatek in it.
> > 
> 
> Agreed on. RTC_DRV_MT7622 will be applied instead to align the usage on
> MT6397 and to get rid of such kind of confusion.
> 
> 
> > > > +		return -EINVAL;
> > > > +
> > > > +	/* Keep yr_base used to calculate the calculate year when userspace
> > > > +	 * queries and extend the maximum year the RTC can count.
> > > > +	 */
> > > > +	hw->yr_base[MTK_TC] = tm->tm_year - MTK_RTC_TM_YR_L -
> > > > +			      (tm->tm_year % MTK_RTC_HW_YR_LIMIT);
> > > 
> > > 
> > > I'm not sure this worth it.
> > > If maximum year it can hold is 99, I'd bet it won't support leap year
> > > correctly after 2100. This make the RTC useless after that. 
> > > 
> > > Also, yr_base is lost after power cycle, so you can't get correct year
> > > back anyway.
> > > 
> > 
> > I agree, the best you can do here is to only support 2000 to 2099.
> > 
> 
> O.K. I will remove those yr_base extension and only consider only
> support from 2000 to 2099 because of no much gain we can get from
> yr_base.
> 
> The only gain is yr_base I thought just allows people have the
> opportunity to set up rtc after 2100. However, it appears to not much
> practical to foresee these things after 2100 and rtc must be setup again
> when either year overflowing or power cycle happens after 2100 as Joe.C
> mentioned.
> 
> In addition, I also found the rtc hardware would take year == 0 as not
> leap year that works for 2100, 2200, 2300, but not for 2000, 2400,
> 2800,... and thus 2000 is also needed to be excluded in both set_time
> and set_alarm if only 2000 to 2099 is supported.
> 

So you can make it work from 2001 to 2100 but I'm not sure it is worth
it.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com